Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751997AbdGZOSV (ORCPT ); Wed, 26 Jul 2017 10:18:21 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:44194 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750783AbdGZOSM (ORCPT ); Wed, 26 Jul 2017 10:18:12 -0400 From: Mark Brown To: Oleksij Rempel Cc: Mark Brown , Mark Brown , kernel@pengutronix.de, linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org In-Reply-To: <20170725075709.27438-2-o.rempel@pengutronix.de> Message-Id: Date: Wed, 26 Jul 2017 15:18:03 +0100 X-SA-Exim-Connect-IP: 2001:470:1f1d:6b5::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "spi: imx: add SPI_NO_CS support" to the spi tree X-SA-Exim-Version: 4.2.1 (built Tue, 02 Aug 2016 21:08:31 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2890 Lines: 78 The patch spi: imx: add SPI_NO_CS support has been applied to the spi tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From ab2f357223eb8fa6acc96bfa002053b6f1f92341 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 25 Jul 2017 09:57:09 +0200 Subject: [PATCH] spi: imx: add SPI_NO_CS support To run spi-loopback-tests on HW without modifications, we need to disable Chip Select. This should avoid surprising side effects for SPI devices by testing patterns. Signed-off-by: Oleksij Rempel Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 424dd013451e..930e47597db3 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -813,6 +813,9 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active) int active = is_active != BITBANG_CS_INACTIVE; int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH); + if (spi->mode & SPI_NO_CS) + return; + if (!gpio_is_valid(spi->cs_gpio)) return; @@ -1139,6 +1142,9 @@ static int spi_imx_setup(struct spi_device *spi) dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, spi->mode, spi->bits_per_word, spi->max_speed_hz); + if (spi->mode & SPI_NO_CS) + return 0; + if (gpio_is_valid(spi->cs_gpio)) gpio_direction_output(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); @@ -1238,7 +1244,8 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->bitbang.master->cleanup = spi_imx_cleanup; spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message; spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message; - spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ + | SPI_NO_CS; if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; -- 2.13.2