Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751797AbdG0C7t (ORCPT ); Wed, 26 Jul 2017 22:59:49 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:37407 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751609AbdG0C6w (ORCPT ); Wed, 26 Jul 2017 22:58:52 -0400 From: To: , , , , , , , , , , , CC: , , , , , , Subject: [PATCH v2 5/5] dt-bindings: PCI: add support for new generation controller Date: Thu, 27 Jul 2017 10:58:39 +0800 Message-ID: <06c9b3439431221794fc9f723fef52ff59be7ec6.1501122135.git.honghui.zhang@mediatek.com> X-Mailer: git-send-email 2.6.4 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7571 Lines: 223 From: Ryder Lee Add support for MediaTek new generation controller and update related properities. Signed-off-by: Ryder Lee Signed-off-by: Honghui Zhang --- .../devicetree/bindings/pci/mediatek-pcie.txt | 168 ++++++++++++++++++++- 1 file changed, 161 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index a968f25..179329b 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -3,18 +3,31 @@ MediaTek Gen2 PCIe controller Required properties: - compatible: Should contain one of the following string: "mediatek,mt2701-pcie" + "mediatek,mt2712-pcie" + "mediatek,mt7622-pcie" "mediatek,mt7623-pcie" - device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe controller. +- reg: Base addresses and lengths of the PICe subsys and root ports. +- reg-names: Names of the above areas to use during resource look-up. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - free_ck :for reference clock of PCIe subsys - - sys_ck0 :for clock of Port0 - - sys_ck1 :for clock of Port1 - - sys_ck2 :for clock of Port2 +- clock-names: + Mandatory entries: + - sys_ckN :transaction layer and data link layer clock + Required entries for MT2701/MT7623: + - free_ck :for reference clock of PCIe subsys + Required entries for MT2712/MT7622: + - ahb_ckN :AHB slave interface operating clock for CSR access and RC + initiated MMIO access + Required entries for MT7622: + - axi_ckN :application layer MMIO channel operating clock + - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when + pcie_mac_ck/pcie_pipe_ck is turned off + - obff_ckN :OBFF functional block operating clock + - pipe_ckN :LTSSM and phy/mac layer operating clock + where N starting from 0 to the maximum number of root ports. - phys: List of PHY specifiers (used by generic PHY framework). - phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the number of PHYs as specified in *phys* property. @@ -33,6 +46,10 @@ Required properties for MT7623/MT2701: - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the number of root ports. +Required properties for MT2712/MT7622: +-interrupts: A list of interrupt outputs of the controller, must have one + entry for each PCIe port + In addition, the device tree node must have sub-nodes describing each PCIe port interface, having the following mandatory properties: @@ -50,7 +67,7 @@ Required properties: property is sufficient. - num-lanes: Number of lanes to use for this port. -Examples: +Examples for MT7623: hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", @@ -68,6 +85,7 @@ Examples: <0 0x1a142000 0 0x1000>, /* Port0 registers */ <0 0x1a143000 0 0x1000>, /* Port1 registers */ <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -127,3 +145,139 @@ Examples: num-lanes = <1>; }; }; + +Examples for MT2712: + pcie: pcie@11700000 { + compatible = "mediatek,generic-pcie-v2"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>, + <0 0x112ff000 0 0x1000>; + reg-names = "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = , + ; + clocks = <&pericfg CLK_PERI_PCIE0>, + <&pericfg CLK_PERI_PCIE1>, + <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&topckgen CLK_TOP_PE2_MAC_P1_SEL>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + +Examples for MT7622: + pcie: pcie@1a140000 { + compatible = "mediatek,generic-pcie-v2"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, + <0 0x1a143000 0 0x1000>, + <0 0x1a145000 0 0x1000>; + reg-names = "subsys", "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = , + ; + clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, + <&pciesys CLK_PCIE_P1_MAC_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AHB_EN>, + <&pciesys CLK_PCIE_P0_AUX_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P0_AXI_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P0_OBFF_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P0_PIPE_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", + "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", + "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; -- 2.6.4