Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751746AbdG1CJx (ORCPT ); Thu, 27 Jul 2017 22:09:53 -0400 Received: from lucky1.263xmail.com ([211.157.147.132]:52278 "EHLO lucky1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751660AbdG1CJv (ORCPT ); Thu, 27 Jul 2017 22:09:51 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 1 X-MAIL-DELIVERY: 0 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-RL-SENDER: shawn.lin@rock-chips.com X-FST-TO: guodong.xu@linaro.org X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: shawn.lin@rock-chips.com X-UNIQUE-TAG: <71402584aeb0573f5e6919e666aff23f> X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 Cc: ulf.hansson@linaro.org, shawn.lin@rock-chips.com, guodong.xu@linaro.org Subject: Re: [PATCH v6] mmc: dw_mmc-k3: add sd support for hi3660 To: liwei , jh80.chung@samsung.com, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org References: <20170706072827.15201-1-liwei213@huawei.com> From: Shawn Lin Message-ID: Date: Fri, 28 Jul 2017 10:09:37 +0800 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.2.1 MIME-Version: 1.0 In-Reply-To: <20170706072827.15201-1-liwei213@huawei.com> Content-Type: text/plain; charset=gbk; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12062 Lines: 436 Trim the CC list On 2017/7/6 15:28, liwei wrote: > From: Li Wei > > Add sd card support for hi3660 soc > > Signed-off-by: Li Wei > Signed-off-by: Chen Jun > > Major changes in v3: > - solve review comments from Heiner Kallweit. > *use the GENMASK and FIELD_PREP macros replace the bit shift operation. > *use usleep_range() replace udelay() and mdelay(). > > Major changes in v4: > - solve review comments from Jaehoon Chung. > *move common register for dwmmc controller to dwmmc header file. > *modify definitions type of some register variables. > *get rid of the magic numbers. > > Major changes in v5: > - further improve coding style. > > Major changes in v6: > - solve review comments for Jaehoon Chung. > *modify dw_mci_hi3660_set_ios() to static. > *fix the comment style. > --- Move the changelog here, namely under "---". > drivers/mmc/host/dw_mmc-k3.c | 316 +++++++++++++++++++++++++++++++++++++++++++ > drivers/mmc/host/dw_mmc.h | 2 + > 2 files changed, 318 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c > index e38fb0020bb1..863bc580eeb8 100644 > --- a/drivers/mmc/host/dw_mmc-k3.c > +++ b/drivers/mmc/host/dw_mmc-k3.c > @@ -8,6 +8,8 @@ > * (at your option) any later version. > */ > > +#include > +#include > #include > #include > #include > @@ -28,7 +30,38 @@ > #define AO_SCTRL_SEL18 BIT(10) > #define AO_SCTRL_CTRL3 0x40C > > +#define DWMMC_SDIO_ID 2 > + > +#define SOC_SCTRL_SCPERCTRL5 (0x314) > +#define SDCARD_IO_SEL18 BIT(2) > + > +#define SDCARD_RD_THRESHOLD (512) > + > +#define GENCLK_DIV (7) > + > +#define GPIO_CLK_ENABLE BIT(16) > +#define GPIO_CLK_DIV_MASK GENMASK(11, 8) > +#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13) > +#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16) > +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21) > +#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26) > + > +#define TIMING_MODE 3 > +#define TIMING_CFG_NUM 10 > + > +#define PULL_DOWN BIT(1) > +#define PULL_UP BIT(0) > + > +#define NUM_PHASES (40) > + > +#define ENABLE_SHIFT_MIN_SMPL (4) > +#define ENABLE_SHIFT_MAX_SMPL (12) > +#define USE_DLY_MIN_SMPL (11) > +#define USE_DLY_MAX_SMPL (14) > + Some of the macros aren't used, please remove. > struct k3_priv { > + int ctrl_id; > + u32 cur_speed; > struct regmap *reg; > }; > > @@ -38,6 +71,41 @@ static unsigned long dw_mci_hi6220_caps[] = { > 0 > }; > > +struct hs_timing { > + u32 drv_phase; > + u32 smpl_dly; > + u32 smpl_phase_max; > + u32 smpl_phase_min; > +}; > + > +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = { > + { /* reserved */ }, > + { /* SD */ > + {7, 0, 15, 15,}, /* 0: LEGACY 400k */ > + {6, 0, 4, 4,}, /* 1: MMC_HS */ > + {6, 0, 3, 3,}, /* 2: SD_HS */ > + {6, 0, 15, 15,}, /* 3: SDR12 */ > + {6, 0, 2, 2,}, /* 4: SDR25 */ > + {4, 0, 11, 0,}, /* 5: SDR50 */ > + {6, 4, 15, 0,}, /* 6: SDR104 */ > + {0}, /* 7: DDR50 */ > + {0}, /* 8: DDR52 */ > + {0}, /* 9: HS200 */ > + }, > + { /* SDIO */ > + {7, 0, 15, 15,}, /* 0: LEGACY 400k */ > + {0}, /* 1: MMC_HS */ > + {6, 0, 15, 15,}, /* 2: SD_HS */ > + {6, 0, 15, 15,}, /* 3: SDR12 */ > + {6, 0, 0, 0,}, /* 4: SDR25 */ > + {4, 0, 12, 0,}, /* 5: SDR50 */ > + {5, 4, 15, 0,}, /* 6: SDR104 */ > + {0}, /* 7: DDR50 */ > + {0}, /* 8: DDR52 */ > + {0}, /* 9: HS200 */ > + } > +}; > + Do you hard-code the delay here? Is it possible for that to vary from different HWs? > static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) > { > int ret; > @@ -66,6 +134,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host) > if (IS_ERR(priv->reg)) > priv->reg = NULL; > > + priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); > + if (priv->ctrl_id < 0) > + priv->ctrl_id = 0; > + > host->priv = priv; > return 0; > } > @@ -144,7 +216,246 @@ static const struct dw_mci_drv_data hi6220_data = { > .execute_tuning = dw_mci_hi6220_execute_tuning, > }; > > +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, > + int smpl_phase) > +{ > + u32 drv_phase; > + u32 smpl_dly; > + u32 use_smpl_dly = 0; > + u32 enable_shift = 0; > + u32 reg_value; > + int ctrl_id; > + struct k3_priv *priv; > + > + priv = host->priv; > + ctrl_id = priv->ctrl_id; > + > + drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase; > + smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly; > + if (smpl_phase == -1) > + smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max + > + hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2; > + > + switch (timing) { > + case MMC_TIMING_UHS_SDR104: > + if (smpl_phase >= USE_DLY_MIN_SMPL && > + smpl_phase <= USE_DLY_MAX_SMPL) > + use_smpl_dly = 1; > + /* fallthrough */ > + case MMC_TIMING_UHS_SDR50: > + if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL && > + smpl_phase <= ENABLE_SHIFT_MAX_SMPL) > + enable_shift = 1; > + break; > + } > + > + mci_writel(host, GPIO, 0x0); > + usleep_range(5, 10); > + > + reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) | > + FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) | > + FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase); > + mci_writel(host, UHS_REG_EXT, reg_value); > + > + mci_writel(host, ENABLE_SHIFT, enable_shift); > + > + reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) | > + FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly); > + mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE); > + > + /* We should delay 1ms wait for timing setting finished. */ > + usleep_range(1000, 2000); > +} > + > +static int dw_mci_hi3660_init(struct dw_mci *host) > +{ > + mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD, > + SDMMC_CARD_RD_THR_EN)); > + > + dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1); > + host->bus_hz /= (GENCLK_DIV + 1); > + > + return 0; > +} > + > +static int dw_mci_set_sel18(struct dw_mci *host, bool set) > +{ > + int ret; > + unsigned int val; > + struct k3_priv *priv; > + > + priv = host->priv; > + > + val = set ? SDCARD_IO_SEL18 : 0; > + ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5, > + SDCARD_IO_SEL18, val); > + if (ret) { > + dev_err(host->dev, "sel18 %u error\n", val); > + return ret; > + } > + > + return 0; > +} > + > +static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios) > +{ > + int ret; > + unsigned long wanted; > + unsigned long actual; > + struct k3_priv *priv = host->priv; > + > + if (!ios->clock || ios->clock == priv->cur_speed) > + return; > + > + wanted = ios->clock * (GENCLK_DIV + 1); > + ret = clk_set_rate(host->ciu_clk, wanted); > + if (ret) { > + dev_err(host->dev, "failed to set rate %luHz\n", wanted); > + return; > + } > + actual = clk_get_rate(host->ciu_clk); > + > + dw_mci_hs_set_timing(host, ios->timing, -1); > + host->bus_hz = actual / (GENCLK_DIV + 1); > + host->current_speed = 0; > + priv->cur_speed = host->bus_hz; > +} > + > +static int dw_mci_get_best_clksmpl(unsigned int sample_flag) > +{ > + int i; > + int interval; > + unsigned int v; > + unsigned int len; > + unsigned int range_start = 0; > + unsigned int range_length = 0; > + unsigned int middle_range = 0; > + > + if (!sample_flag) > + return -EIO; > + > + if (~sample_flag == 0) > + return 0; > + > + i = ffs(sample_flag) - 1; > + > + /* > + * A clock cycle is divided into 32 phases, > + * each of which is represented by a bit, > + * finding the optimal phase. > + */ > + while (i < 32) { > + v = ror32(sample_flag, i); > + len = ffs(~v) - 1; > + > + if (len > range_length) { > + range_length = len; > + range_start = i; > + } > + > + interval = ffs(v >> len) - 1; > + if (interval < 0) > + break; > + > + i += len + interval; > + } > + > + middle_range = range_start + range_length / 2; > + if (middle_range >= 32) > + middle_range %= 32; > + > + return middle_range; > +} > + > +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode) > +{ > + int i = 0; > + struct dw_mci *host = slot->host; > + struct mmc_host *mmc = slot->mmc; > + int smpl_phase = 0; > + u32 tuning_sample_flag = 0; > + int best_clksmpl = 0; > + > + for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) { > + smpl_phase %= 32; > + > + mci_writel(host, TMOUT, ~0); > + dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase); > + > + if (!mmc_send_tuning(mmc, opcode, NULL)) > + tuning_sample_flag |= (1 << smpl_phase); > + else > + tuning_sample_flag &= ~(1 << smpl_phase); > + } > + > + best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag); > + if (best_clksmpl < 0) { > + dev_err(host->dev, "All phases bad!\n"); > + return -EIO; > + } > + > + dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl); > + > + dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n", > + best_clksmpl, tuning_sample_flag); > + return 0; > +} > + > +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc, > + struct mmc_ios *ios) > +{ > + int ret; > + int min_uv = 0; > + int max_uv = 0; > + struct dw_mci_slot *slot = mmc_priv(mmc); > + struct k3_priv *priv; > + struct dw_mci *host; > + > + host = slot->host; > + priv = host->priv; > + > + if (!priv || !priv->reg) > + return 0; > + > + if (priv->ctrl_id == DWMMC_SDIO_ID) > + return 0; > + > + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { > + ret = dw_mci_set_sel18(host, 0); > + if (ret) > + return ret; > + min_uv = 2950000; > + max_uv = 2950000; > + } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { > + ret = dw_mci_set_sel18(host, 1); > + if (ret) > + return ret; > + min_uv = 1800000; > + max_uv = 1800000; > + } > + > + if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) > + return 0; > + > + ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv); > + if (ret) { > + dev_err(host->dev, "Regulator set error %d: %d - %d\n", > + ret, min_uv, max_uv); > + return ret; > + } > + return 0; > +} > + Could you share something for this fucntion with that of dw_mci_hi6220_switch_voltage? And why dw_mmc-k3 need to handle the vqmmc as I think mmc core will do it properly? > +static const struct dw_mci_drv_data hi3660_data = { > + .init = dw_mci_hi3660_init, > + .set_ios = dw_mci_hi3660_set_ios, > + .parse_dt = dw_mci_hi6220_parse_dt, > + .execute_tuning = dw_mci_hi3660_execute_tuning, > + .switch_voltage = dw_mci_hi3660_switch_voltage, > +}; > + > static const struct of_device_id dw_mci_k3_match[] = { > + { .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, }, > { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, > { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, }, > {}, > @@ -155,6 +466,11 @@ static int dw_mci_k3_probe(struct platform_device *pdev) > { > const struct dw_mci_drv_data *drv_data; > const struct of_device_id *match; > + struct reset_control *rst; > + > + rst = devm_reset_control_get(&pdev->dev, NULL); You need to use devm_reset_control_get_optional_exclusive and do you need to handle the deferred case? > + if (!IS_ERR(rst)) > + reset_control_reset(rst); > > match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); > drv_data = match->data; > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index ce347361f3dc..7cdcafda8eec 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -319,6 +319,8 @@ struct dw_mci_board { > #define SDMMC_DSCADDR 0x094 > #define SDMMC_BUFADDR 0x098 > #define SDMMC_CDTHRCTL 0x100 > +#define SDMMC_UHS_REG_EXT 0x108 > +#define SDMMC_ENABLE_SHIFT 0x110 Where you use them? > #define SDMMC_DATA(x) (x) > /* > * Registers to support idmac 64-bit address mode >