Date: Tue, 24 Jun 2003 01:14:36 +0200
From: Tobias Diedrich <ranma@gmx.at>
To: linux-kernel@vger.kernel.org
Subject: WDC HD found, but ignored?
Message-ID: <20030623231436.GA5612@melchior.yamamaya.is-a-geek.org>
Mail-Followup-To: Tobias Diedrich <ranma@gmx.at>,
	linux-kernel@vger.kernel.org
Mime-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha1;
	protocol="application/pgp-signature"; boundary="liOOAslEiF7prFVr"
Content-Disposition: inline
User-Agent: Mutt/1.5.4i
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 12345
Lines: 293


--liOOAslEiF7prFVr
Content-Type: text/plain; charset=euc-jp
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

This is a really weird case.
The kernel (2.4.21-ac2) finds the hard disk (WDC WD1800JB-00DUA0), but
does not attach the ide-disk driver (No error message). The following
partition check fails with I/O error on sector 0. Attempts to access the
disk (In this case hdc) on the booted system result in the kernel trying
to load the ide-disk module, which fails because it is compiled in.
The works fine in this configuration when booting the W2K partition.

I hope someone has an idea on what is going wrong here.
Please CC me on replies as I am not subscribed to the list at the
moment.
Kernel boot log:

Linux version 2.4.21-ac2 (root@elektra) (gcc version 2.95.4 20011002 (Debia=
n prerelease)) #5 Sun Dec 1 18:56:36 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
 BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Kernel command line: root=3D/dev/hda1 vga=3Dext parport=3Dauto hdc=3Dide-sc=
si
ide_setup: hdc=3Dide-scsi
Initializing CPU#0
Detected 1109.919 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 2215.11 BogoMIPS
Memory: 904068k/917504k available (2130k kernel code, 13052k reserved, 697k=
 data, 80k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(TM) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1aa0, last bus=3D1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3147] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnPBIOS: Found PnP BIOS installation structure at 0xc00f9c50
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9c80, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PnPBIOS: PNP0c02: ioport range 0x290-0x297 has been reserved
PnPBIOS: PNP0c02: ioport range 0x3f0-0x3f1 has been reserved
PnPBIOS: PNP0c02: ioport range 0xe400-0xe47f has been reserved
PnPBIOS: PNP0c02: ioport range 0xec00-0xec3f has been reserved
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver v1.1.22 [Flags: R/O]
udf: registering filesystem
SGI XFS with no debug enabled
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMP=
AT,ECP]
parport0: Printer, HEWLETT-PACKARD DESKJET 940C
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_P=
CI ISAPNP enabled
ttyS00 at 0x03f8 (irq =3D 4) is a 16550A
ttyS01 at 0x02f8 (irq =3D 3) is a 16550A
gameport0: Emu10k1 Gameport at 0xa000 size 8 speed 1169 kHz
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepr=
o100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <s=
aw@saw.sw.com.sg> and others
PCI: Found IRQ 12 for device 00:0f.0
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:02:B3:1C:8B:4F, IRQ 12.
  Board assembly 721383-016, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D=
xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:pio, hdd:pio
hda: MAXTOR 6L080J4, ATA DISK drive
hdb: MAXTOR 6L080J4, ATA DISK drive
blk: queue c0405b40, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0405c90, I/O limit 4095Mb (mask 0xffffffff)
hdc: WDC WD1800JB-00DUA0, ATA DISK drive
hdd: RICOH CD-R/RW MP7200A, ATAPI CD/DVD-ROM drive
blk: queue c0405fbc, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area =3D> 1
hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=3D9732/255/63, UDMA(=
133)
hdb: attached ide-disk driver.
hdb: host protected area =3D> 1
hdb: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=3D9732/255/63, UDMA(=
133)
hdd: attached ide-scsi driver.
Partition check:
 hda: hda1 hda2 < hda5 > hda3 hda4
 hdb: hdb1
 hdc:end_request: I/O error, dev 16:00 (hdc), sector 0
end_request: I/O error, dev 16:00 (hdc), sector 2
end_request: I/O error, dev 16:00 (hdc), sector 4
end_request: I/O error, dev 16:00 (hdc), sector 6
end_request: I/O error, dev 16:00 (hdc), sector 0
end_request: I/O error, dev 16:00 (hdc), sector 2
end_request: I/O error, dev 16:00 (hdc), sector 4
end_request: I/O error, dev 16:00 (hdc), sector 6
 unable to read partition table
SCSI subsystem driver Revision: 1.00
aec671x_detect:=20
PCI: Found IRQ 5 for device 00:0c.0
PCI: Sharing IRQ 5 with 00:09.0
PCI: Sharing IRQ 5 with 00:10.0
   ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0    IO:a800, IRQ:5.
         ID:  7  Host Adapter
scsi0 : ACARD AEC-6710/6712/67160 PCI Ultra/W/LVD SCSI-3 Adapter Driver V2.=
6+ac=20
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: RICOH     Model: CD-R/RW MP7200A   Rev: 1.10
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 00:09.2
PCI: Sharing IRQ 10 with 00:05.0
PCI: Sharing IRQ 10 with 00:0e.0
ehci_hcd 00:09.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:09.2: irq 10, pci mem f8828000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:09.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:09.2 PCI cache line size corrected to 64.
ehci_hcd 00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-12/2.4
hub.c: USB hub found
hub.c: 4 ports detected
host/usb-uhci.c: $Revision: 1.275 $ time 18:56:39 Dec  1 2002
host/usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:09.0
PCI: Sharing IRQ 5 with 00:0c.0
PCI: Sharing IRQ 5 with 00:10.0
host/usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:09.1
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 00:0d.1
PCI: Sharing IRQ 11 with 01:00.0
host/usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 11
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:11.2
IRQ routing conflict for 00:11.2, have irq 9, want irq 3
IRQ routing conflict for 00:11.3, have irq 9, want irq 3
host/usb-uhci.c: USB UHCI at I/O 0x9000, IRQ 9
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:11.3
IRQ routing conflict for 00:11.2, have irq 9, want irq 3
IRQ routing conflict for 00:11.3, have irq 9, want irq 3
host/usb-uhci.c: USB UHCI at I/O 0x8800, IRQ 9
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 80k freed
hub.c: new USB device 00:09.0-2, assigned address 2
host/usb-uhci.c: interrupt, status 3, frame# 1206
input0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on=
 usb2:2.0
hub.c: new USB device 00:11.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x5655/0x4149) is not claimed by any active =
driver.
Adding Swap: 995988k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Creative EMU10K1 PCI Audio Driver, version 0.20, 18:19:16 Dec  1 2002
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:05.0
PCI: Sharing IRQ 10 with 00:09.2
emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xa400-0xa41f, IRQ 10
ac97_codec: AC97 Audio codec, id: EMC40 (Unknown)
emu10k1: SBLive! 5.1 card detected
FAT: Did not find valid FSINFO signature.
Found signature1 0x66024a1e signature2 0xc88b6602 sector=3D4.
VFS: Can't find a valid FAT filesystem on dev 03:41.
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:41 (hdd), sector 0
NTFS: Reading super block failed
blk: queue c0405b40, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0405c90, I/O limit 4095Mb (mask 0xffffffff)
hdd: drive_cmd: status=3D0x41 { DriveReady Error }
hdd: drive_cmd: error=3D0x04


Thanks in advance,

--=20
Tobias						PGP: http://9ac7e0bc.2ya.com
This mail is made of 100% recycled bits
np: Various: Back in Time II 03 - Warhawk []

--liOOAslEiF7prFVr
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE+94nc5q/seprH4LwRAvqUAJ4lG6V/fvlna/AW99F4YjsTk1dpIACdEsVj
rIYkqmGSOcPwOVR+iy2Y318=
=v46d
-----END PGP SIGNATURE-----

--liOOAslEiF7prFVr--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/