Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752326AbdGaNg7 (ORCPT ); Mon, 31 Jul 2017 09:36:59 -0400 Received: from vps0.lunn.ch ([178.209.37.122]:45985 "EHLO vps0.lunn.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752099AbdGaNg5 (ORCPT ); Mon, 31 Jul 2017 09:36:57 -0400 Date: Mon, 31 Jul 2017 15:36:53 +0200 From: Andrew Lunn To: Egil Hjelmeland Cc: vivien.didelot@savoirfairelinux.com, f.fainelli@gmail.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de Subject: Re: [PATCH net-next 1/2] net: dsa: lan9303: Refactor lan9303_xxx_packet_processing() Message-ID: <20170731133653.GC24562@lunn.ch> References: <20170731113355.4284-1-privat@egil-hjelmeland.no> <20170731113355.4284-2-privat@egil-hjelmeland.no> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20170731113355.4284-2-privat@egil-hjelmeland.no> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6376 Lines: 170 On Mon, Jul 31, 2017 at 01:33:54PM +0200, Egil Hjelmeland wrote: > lan9303_enable_packet_processing, lan9303_disable_packet_processing() > Pass port number (0,1,2) as parameter instead of port offset. > > Plus replaced a constant 0x400 with LAN9303_SWITCH_PORT_REG(). > > Signed-off-by: Egil Hjelmeland > --- > drivers/net/dsa/lan9303-core.c | 59 +++++++++++++++++++++--------------------- > 1 file changed, 30 insertions(+), 29 deletions(-) > > diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c > index 8e430d1ee297..4d2bb8144c15 100644 > --- a/drivers/net/dsa/lan9303-core.c > +++ b/drivers/net/dsa/lan9303-core.c > @@ -159,9 +159,7 @@ > # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT1 (BIT(9) | BIT(8)) > # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0 (BIT(1) | BIT(0)) > > -#define LAN9303_PORT_0_OFFSET 0x400 > -#define LAN9303_PORT_1_OFFSET 0x800 > -#define LAN9303_PORT_2_OFFSET 0xc00 > +#define LAN9303_SWITCH_PORT_REG(port, reg0) (0x400 * (port) + (reg0)) > > /* the built-in PHYs are of type LAN911X */ > #define MII_LAN911X_SPECIAL_MODES 0x12 > @@ -458,24 +456,25 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip) > return 0; > } > > -#define LAN9303_MAC_RX_CFG_OFFS (LAN9303_MAC_RX_CFG_0 - LAN9303_PORT_0_OFFSET) > -#define LAN9303_MAC_TX_CFG_OFFS (LAN9303_MAC_TX_CFG_0 - LAN9303_PORT_0_OFFSET) > - > static int lan9303_disable_packet_processing(struct lan9303 *chip, > unsigned int port) > { > int ret; > > /* disable RX, but keep register reset default values else */ > - ret = lan9303_write_switch_reg(chip, LAN9303_MAC_RX_CFG_OFFS + port, > - LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES); > + ret = lan9303_write_switch_reg( > + chip, > + LAN9303_SWITCH_PORT_REG(port, LAN9303_MAC_RX_CFG_0), > + LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES); Hi Egil As you can see from the indentation change, this is rather long. What we have in mv88e6xxx are functions which act on a port. You could have a function: lan9303_write_switch_port(struct lan9303 chip, unsigned int port, u16 reg, u32 val) > if (ret) > return ret; > > /* disable TX, but keep register reset default values else */ > - return lan9303_write_switch_reg(chip, LAN9303_MAC_TX_CFG_OFFS + port, > - LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | > - LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE); > + return lan9303_write_switch_reg( > + chip, > + LAN9303_SWITCH_PORT_REG(port, LAN9303_MAC_TX_CFG_0), > + LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | > + LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE); > } > > static int lan9303_enable_packet_processing(struct lan9303 *chip, > @@ -484,17 +483,21 @@ static int lan9303_enable_packet_processing(struct lan9303 *chip, > int ret; > > /* enable RX and keep register reset default values else */ > - ret = lan9303_write_switch_reg(chip, LAN9303_MAC_RX_CFG_OFFS + port, > - LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES | > - LAN9303_MAC_RX_CFG_X_RX_ENABLE); > + ret = lan9303_write_switch_reg( > + chip, > + LAN9303_SWITCH_PORT_REG(port, LAN9303_MAC_RX_CFG_0), > + LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES | > + LAN9303_MAC_RX_CFG_X_RX_ENABLE); > if (ret) > return ret; > > /* enable TX and keep register reset default values else */ > - return lan9303_write_switch_reg(chip, LAN9303_MAC_TX_CFG_OFFS + port, > - LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | > - LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE | > - LAN9303_MAC_TX_CFG_X_TX_ENABLE); > + return lan9303_write_switch_reg( > + chip, > + LAN9303_SWITCH_PORT_REG(port, LAN9303_MAC_TX_CFG_0), > + LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | > + LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE | > + LAN9303_MAC_TX_CFG_X_TX_ENABLE); > } > > /* We want a special working switch: > @@ -558,13 +561,13 @@ static int lan9303_disable_processing(struct lan9303 *chip) > { > int ret; > > - ret = lan9303_disable_packet_processing(chip, LAN9303_PORT_0_OFFSET); > + ret = lan9303_disable_packet_processing(chip, 0); > if (ret) > return ret; > - ret = lan9303_disable_packet_processing(chip, LAN9303_PORT_1_OFFSET); > + ret = lan9303_disable_packet_processing(chip, 1); > if (ret) > return ret; > - return lan9303_disable_packet_processing(chip, LAN9303_PORT_2_OFFSET); > + return lan9303_disable_packet_processing(chip, 2); > } > > static int lan9303_check_device(struct lan9303 *chip) > @@ -634,7 +637,7 @@ static int lan9303_setup(struct dsa_switch *ds) > if (ret) > dev_err(chip->dev, "failed to separate ports %d\n", ret); > > - ret = lan9303_enable_packet_processing(chip, LAN9303_PORT_0_OFFSET); > + ret = lan9303_enable_packet_processing(chip, 0); > if (ret) > dev_err(chip->dev, "failed to re-enable switching %d\n", ret); > > @@ -704,7 +707,7 @@ static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port, > unsigned int u, poff; > int ret; > > - poff = port * 0x400; > + poff = LAN9303_SWITCH_PORT_REG(port, 0); > > for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) { > ret = lan9303_read_switch_reg(chip, > @@ -757,11 +760,9 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port, > /* enable internal packet processing */ > switch (port) { > case 1: > - return lan9303_enable_packet_processing(chip, > - LAN9303_PORT_1_OFFSET); > + return lan9303_enable_packet_processing(chip, port); > case 2: > - return lan9303_enable_packet_processing(chip, > - LAN9303_PORT_2_OFFSET); > + return lan9303_enable_packet_processing(chip, port); case 1 and 2 are now identical. So you can simplify this. > default: > dev_dbg(chip->dev, > "Error: request to power up invalid port %d\n", port); > @@ -778,12 +779,12 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port, > /* disable internal packet processing */ > switch (port) { > case 1: > - lan9303_disable_packet_processing(chip, LAN9303_PORT_1_OFFSET); > + lan9303_disable_packet_processing(chip, port); > lan9303_phy_write(ds, chip->phy_addr_sel_strap + 1, > MII_BMCR, BMCR_PDOWN); > break; > case 2: > - lan9303_disable_packet_processing(chip, LAN9303_PORT_2_OFFSET); > + lan9303_disable_packet_processing(chip, port); > lan9303_phy_write(ds, chip->phy_addr_sel_strap + 2, > MII_BMCR, BMCR_PDOWN); And this can also be simplified. Andrew