Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1752553AbdGaPWU (ORCPT <rfc822;w@1wt.eu>);
        Mon, 31 Jul 2017 11:22:20 -0400
Received: from foss.arm.com ([217.140.101.70]:52930 "EHLO foss.arm.com"
        rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
        id S1752497AbdGaPVt (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
        Mon, 31 Jul 2017 11:21:49 -0400
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: linux-acpi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Will Deacon <will.deacon@arm.com>, Robin Murphy <robin.murphy@arm.com>,
        Nate Watterson <nwatters@codeaurora.org>,
        Robert Moore <robert.moore@intel.com>,
        Hanjun Guo <hanjun.guo@linaro.org>, Feng Kan <fkan@apm.com>,
        Jon Masters <jcm@redhat.com>, Zhang Rui <rui.zhang@intel.com>,
        "Rafael J. Wysocki" <rjw@rjwysocki.net>
Subject: [PATCH v2 5/5] ACPI/IORT: Add IORT named component memory address limits
Date: Mon, 31 Jul 2017 16:23:23 +0100
Message-Id: <20170731152323.32488-6-lorenzo.pieralisi@arm.com>
X-Mailer: git-send-email 2.10.0
In-Reply-To: <20170731152323.32488-1-lorenzo.pieralisi@arm.com>
References: <20170731152323.32488-1-lorenzo.pieralisi@arm.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 2193
Lines: 77

IORT named components provide firmware configuration describing
how many address bits a given device is capable of generating
to address memory.

Add code to the kernel to retrieve memory address limits
configuration for IORT named components and configure DMA masks
accordingly.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Nate Watterson <nwatters@codeaurora.org>
---
 drivers/acpi/arm64/iort.c | 40 ++++++++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 67b85ae..b85d19f 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -680,6 +680,24 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
 	return ret ? NULL : ops;
 }
 
+static int nc_dma_get_range(struct device *dev, u64 *size)
+{
+	struct acpi_iort_node *node;
+	struct acpi_iort_named_component *ncomp;
+
+	node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
+			      iort_match_node_callback, dev);
+	if (!node)
+		return -ENODEV;
+
+	ncomp = (struct acpi_iort_named_component *)node->node_data;
+
+	*size = ncomp->memory_address_limit >= 64 ? ~0ULL :
+			1ULL<<ncomp->memory_address_limit;
+
+	return 0;
+}
+
 /**
  * iort_dma_setup() - Set-up device DMA parameters.
  *
@@ -708,17 +726,19 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
 
 	size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
 
-	if (dev_is_pci(dev)) {
+	if (dev_is_pci(dev))
 		ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
-		if (!ret) {
-			mask = __roundup_pow_of_two(dmaaddr + size) - 1;
-			/*
-			 * Limit coherent and dma mask based on size
-			 * retrieved from firmware.
-			 */
-			dev->coherent_dma_mask = mask;
-			*dev->dma_mask = mask;
-		}
+	else
+		ret = nc_dma_get_range(dev, &size);
+
+	if (!ret) {
+		mask = __roundup_pow_of_two(dmaaddr + size) - 1;
+		/*
+		 * Limit coherent and dma mask based on size
+		 * retrieved from firmware.
+		 */
+		dev->coherent_dma_mask = mask;
+		*dev->dma_mask = mask;
 	}
 
 	*dma_addr = dmaaddr;
-- 
2.10.0