Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751591AbdHAHdv (ORCPT ); Tue, 1 Aug 2017 03:33:51 -0400 Received: from mailgw02.mediatek.com ([210.61.82.184]:14666 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750763AbdHAHdt (ORCPT ); Tue, 1 Aug 2017 03:33:49 -0400 From: Ryder Lee To: Hans de Goede , Tejun Heo CC: Rob Herring , , , , , Long Cheng , Ryder Lee Subject: [PATCH v1 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller Date: Tue, 1 Aug 2017 15:33:22 +0800 Message-ID: <2920172aec0270903558a688dd08f43053a6afaa.1501381975.git.ryder.lee@mediatek.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2674 Lines: 67 Add DT bindings for the onboard SATA controller present on the MediaTek SoCs. Signed-off-by: Ryder Lee --- Documentation/devicetree/bindings/ata/ahci-mtk.txt | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt new file mode 100644 index 0000000..8f64f15 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt @@ -0,0 +1,50 @@ +MediaTek Seria ATA controller + +Required properties: + - compatible : Must be "mediatek,ahci". + - reg : Physical base addresses and length of register sets. + - interrupts : Interrupt associated with the SATA device. + - interrupt-names : Associated name must be: "hostc". + - clocks : A list of phandle and clock specifier pairs, one for each + entry in clock-names. + - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm". + - phys : A phandle and PHY specifier pair for the PHY port. + - phy-names : Associated name must be: "sata-phy". + - ports-implemented : Mask that indicates which ports that the HBA supports + are available for software to use. Useful if PORTS_IMPL + is not programmed by the BIOS, which is true with some + embedded SOC's. + +Optional properties: + - power-domains : A phandle and power domain specifier pair to the power + domain which is responsible for collapsing and restoring + power to the peripheral. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Associated names must be: "axi-rst", "sw-rst", "reg-rst". + - mediatek,phy-mode : A phandle to the system controller, used to enable + SATA function. + +Example: + + sata: sata@1a200000 { + compatible = "mediatek,ahci"; + reg = <0 0x1a200000 0 0x1100>; + interrupts = ; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&u3port1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi-rst", "sw-rst", "reg-rst"; + mediatek,phy-mode = <&pciesys>; + }; -- 1.9.1