Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752245AbdHBPan (ORCPT ); Wed, 2 Aug 2017 11:30:43 -0400 Received: from mx27lb.world4you.com ([81.19.149.137]:55286 "EHLO mx27lb.world4you.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751190AbdHBPal (ORCPT ); Wed, 2 Aug 2017 11:30:41 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Wed, 02 Aug 2017 17:30:36 +0200 From: Eric Schwarz To: Alan Tull Cc: Anatolij Gustschin , Lee Jones , Linus Walleij , Moritz Fischer , linux-gpio@vger.kernel.org, linux-fpga@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel , linux-fpga-owner@vger.kernel.org Subject: Re: [PATCH 0/3] FPGA Manager support for FPP via FT232H FT245-FIFO In-Reply-To: References: <1499374158-12388-1-git-send-email-agust@denx.de> <42304c20fd460f456ef588df0b97a593@sw-optimization.com> Message-ID: User-Agent: World4You Webmail X-SA-Do-Not-Run: Yes X-AV-Do-Run: Yes X-SA-Exim-Connect-IP: 81.19.149.44 X-SA-Exim-Mail-From: eas@sw-optimization.com X-SA-Exim-Scanned: No (on mx27lb.world4you.com); SAEximRunCond expanded to false Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3436 Lines: 96 Hello Alan, many thanks for your response. Well, I am following the whole discussion from the very start and for my taste it is too superficial - don't know whether this is the right wording. Please get me right. We need some kind of implementation specification or a sample way on how to implement stuff. At some point I honestly lost track, thus I was asking for a summary so in the end the result is what we want. If it is clear to everyone what shall be done it should not be kind of a big deal to quickly sum it up which I/we would highly appreciate. Many thanks Eric Am 02.08.2017 16:16, schrieb Alan Tull: > On Wed, Aug 2, 2017 at 6:36 AM, Eric Schwarz > wrote: > >> Dear all, >> >> DENX Software Engineering develops and brings this driver to mainline >> on >> behalf of us (ARRI*). >> >> Since there was a lot of discussion around this patch series I would >> highly >> appreciate if someone could sum up what needs to be changed in detail >> in >> order to get this driver into the mainline as I am used it from the >> other >> "line-by-line" reviews. I understood that the approach is not generic >> enough >> - please correct me if I am wrong on that point. We somehow need a >> commitment that if we change it to another way that the whole >> discussion >> does not start from scratch. >> >> Many thanks >> Eric > > Hi Eric, > > Patchwork collects all email response to patchsets posted on this > mailing list [1] so that could be helpful for you here. > > Alan > > [1] https://patchwork.kernel.org/project/linux-fpga/list/?submitter=769 > > * I am just writing from my private e-mail address since Outlook > obviously > renders all my mails as HTML despite what I am configuring. > > [1]... http://www.arri.com > > Am 06.07.2017 22:49, schrieb Anatolij Gustschin: > > This series adds support for fast passive parallel (FPP) Altera > FPGA configuration using FTDI FT232H chip in FT245-FIFO mode. > It has been used to configure Arria 10 FPGAs. > > Patch 1 adds an FT232H MFD driver with common functions that > can be used for FT232H USB-GPIO/I2C/SPI master adapter drivers. > Currently it is used for FT232H GPIO support (in patch 2) and > for FT245 FIFO transfers in FPP FPGA manager driver in patch 3. > Driver support for FT232H USB-I2C/SPI master adapters can be > added later. > > Patch 2 adds a simple GPIO driver supporting four FT232H CBUS GPIOs. > > Patch 3 adds an FPGA Manager driver for Altera FPP FPGA configuration > via FT232H FT245-FIFO interface. > > Anatolij Gustschin (3): > mfd: Add support for FTDI FT232H devices > gpio: Add FT232H CBUS GPIO driver > fpga manager: Add FT232H driver for Altera FPP > > drivers/fpga/Kconfig | 7 + > drivers/fpga/Makefile | 1 + > drivers/fpga/ftdi-fifo-fpp.c | 569 > ++++++++++++++++++++++++++++++++++++++++++ > drivers/gpio/Kconfig | 11 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-ftdi-cbus.c | 251 +++++++++++++++++++ > drivers/mfd/Kconfig | 9 + > drivers/mfd/Makefile | 1 + > drivers/mfd/ftdi-ft232h.c | 470 ++++++++++++++++++++++++++++++++++ > include/linux/mfd/ftdi/ftdi.h | 71 ++++++ > 10 files changed, 1391 insertions(+) > create mode 100644 drivers/fpga/ftdi-fifo-fpp.c > create mode 100644 drivers/gpio/gpio-ftdi-cbus.c > create mode 100644 drivers/mfd/ftdi-ft232h.c > create mode 100644 include/linux/mfd/ftdi/ftdi.h