Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752088AbdHCJpy (ORCPT ); Thu, 3 Aug 2017 05:45:54 -0400 Received: from aibo.runbox.com ([91.220.196.211]:36706 "EHLO aibo.runbox.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751154AbdHCJps (ORCPT ); Thu, 3 Aug 2017 05:45:48 -0400 From: Egil Hjelmeland To: andrew@lunn.ch, vivien.didelot@savoirfairelinux.com, f.fainelli@gmail.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de Cc: Egil Hjelmeland Subject: [PATCH v3 net-next 1/5] net: dsa: lan9303: Change lan9303_xxx_packet_processing() port param. Date: Thu, 3 Aug 2017 11:45:03 +0200 Message-Id: <20170803094507.3439-2-privat@egil-hjelmeland.no> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170803094507.3439-1-privat@egil-hjelmeland.no> References: <20170803094507.3439-1-privat@egil-hjelmeland.no> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5738 Lines: 157 lan9303_enable_packet_processing, lan9303_disable_packet_processing() Pass port number (0,1,2) as parameter instead of port offset. Because other functions in the module pass port numbers. And to enable simplifications in following patch. Introduce lan9303_write_switch_port(). Signed-off-by: Egil Hjelmeland --- drivers/net/dsa/lan9303-core.c | 60 ++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 28 deletions(-) diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index 8e430d1ee297..fa19e320c5a8 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -159,9 +159,7 @@ # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT1 (BIT(9) | BIT(8)) # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0 (BIT(1) | BIT(0)) -#define LAN9303_PORT_0_OFFSET 0x400 -#define LAN9303_PORT_1_OFFSET 0x800 -#define LAN9303_PORT_2_OFFSET 0xc00 +#define LAN9303_SWITCH_PORT_REG(port, reg0) (0x400 * (port) + (reg0)) /* the built-in PHYs are of type LAN911X */ #define MII_LAN911X_SPECIAL_MODES 0x12 @@ -428,6 +426,13 @@ static int lan9303_read_switch_reg(struct lan9303 *chip, u16 regnum, u32 *val) return ret; } +static int lan9303_write_switch_port( + struct lan9303 *chip, int port, u16 regnum, u32 val) +{ + return lan9303_write_switch_reg( + chip, LAN9303_SWITCH_PORT_REG(port, regnum), val); +} + static int lan9303_detect_phy_setup(struct lan9303 *chip) { int reg; @@ -458,24 +463,23 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip) return 0; } -#define LAN9303_MAC_RX_CFG_OFFS (LAN9303_MAC_RX_CFG_0 - LAN9303_PORT_0_OFFSET) -#define LAN9303_MAC_TX_CFG_OFFS (LAN9303_MAC_TX_CFG_0 - LAN9303_PORT_0_OFFSET) - static int lan9303_disable_packet_processing(struct lan9303 *chip, unsigned int port) { int ret; /* disable RX, but keep register reset default values else */ - ret = lan9303_write_switch_reg(chip, LAN9303_MAC_RX_CFG_OFFS + port, - LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES); + ret = lan9303_write_switch_port( + chip, port, LAN9303_MAC_RX_CFG_0, + LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES); if (ret) return ret; /* disable TX, but keep register reset default values else */ - return lan9303_write_switch_reg(chip, LAN9303_MAC_TX_CFG_OFFS + port, - LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | - LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE); + return lan9303_write_switch_port( + chip, port, LAN9303_MAC_TX_CFG_0, + LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | + LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE); } static int lan9303_enable_packet_processing(struct lan9303 *chip, @@ -484,17 +488,19 @@ static int lan9303_enable_packet_processing(struct lan9303 *chip, int ret; /* enable RX and keep register reset default values else */ - ret = lan9303_write_switch_reg(chip, LAN9303_MAC_RX_CFG_OFFS + port, - LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES | - LAN9303_MAC_RX_CFG_X_RX_ENABLE); + ret = lan9303_write_switch_port( + chip, port, LAN9303_MAC_RX_CFG_0, + LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES | + LAN9303_MAC_RX_CFG_X_RX_ENABLE); if (ret) return ret; /* enable TX and keep register reset default values else */ - return lan9303_write_switch_reg(chip, LAN9303_MAC_TX_CFG_OFFS + port, - LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | - LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE | - LAN9303_MAC_TX_CFG_X_TX_ENABLE); + return lan9303_write_switch_port( + chip, port, LAN9303_MAC_TX_CFG_0, + LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | + LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE | + LAN9303_MAC_TX_CFG_X_TX_ENABLE); } /* We want a special working switch: @@ -558,13 +564,13 @@ static int lan9303_disable_processing(struct lan9303 *chip) { int ret; - ret = lan9303_disable_packet_processing(chip, LAN9303_PORT_0_OFFSET); + ret = lan9303_disable_packet_processing(chip, 0); if (ret) return ret; - ret = lan9303_disable_packet_processing(chip, LAN9303_PORT_1_OFFSET); + ret = lan9303_disable_packet_processing(chip, 1); if (ret) return ret; - return lan9303_disable_packet_processing(chip, LAN9303_PORT_2_OFFSET); + return lan9303_disable_packet_processing(chip, 2); } static int lan9303_check_device(struct lan9303 *chip) @@ -634,7 +640,7 @@ static int lan9303_setup(struct dsa_switch *ds) if (ret) dev_err(chip->dev, "failed to separate ports %d\n", ret); - ret = lan9303_enable_packet_processing(chip, LAN9303_PORT_0_OFFSET); + ret = lan9303_enable_packet_processing(chip, 0); if (ret) dev_err(chip->dev, "failed to re-enable switching %d\n", ret); @@ -757,11 +763,9 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port, /* enable internal packet processing */ switch (port) { case 1: - return lan9303_enable_packet_processing(chip, - LAN9303_PORT_1_OFFSET); + return lan9303_enable_packet_processing(chip, port); case 2: - return lan9303_enable_packet_processing(chip, - LAN9303_PORT_2_OFFSET); + return lan9303_enable_packet_processing(chip, port); default: dev_dbg(chip->dev, "Error: request to power up invalid port %d\n", port); @@ -778,12 +782,12 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port, /* disable internal packet processing */ switch (port) { case 1: - lan9303_disable_packet_processing(chip, LAN9303_PORT_1_OFFSET); + lan9303_disable_packet_processing(chip, port); lan9303_phy_write(ds, chip->phy_addr_sel_strap + 1, MII_BMCR, BMCR_PDOWN); break; case 2: - lan9303_disable_packet_processing(chip, LAN9303_PORT_2_OFFSET); + lan9303_disable_packet_processing(chip, port); lan9303_phy_write(ds, chip->phy_addr_sel_strap + 2, MII_BMCR, BMCR_PDOWN); break; -- 2.11.0