Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751290AbdHDEAP (ORCPT ); Fri, 4 Aug 2017 00:00:15 -0400 Received: from mailgw02.mediatek.com ([210.61.82.184]:64231 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751891AbdHDD7s (ORCPT ); Thu, 3 Aug 2017 23:59:48 -0400 From: To: , , , , CC: , , Sean Wang Subject: [PATCH v4 1/2] arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2 Date: Fri, 4 Aug 2017 11:59:34 +0800 Message-ID: <1c83eae1944992f7c5a9af946e03bc2c4e62c874.1501819056.git.sean.wang@mediatek.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1724 Lines: 69 From: Sean Wang The bananapi-r2 board has an SD-card controller and built-in EMMC storage so enables those devices in the devicetree. Also cleanup nodes in alphabetical order in the patch. Signed-off-by: Matthias Brugger Signed-off-by: Sean Wang --- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 37 +++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 9f3e6dd..444ed93 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -179,6 +179,32 @@ status = "okay"; }; +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + vmmc-supply = <&mt6323_vemc3v3_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + cd-gpios = <&pio 261 0>; + vmmc-supply = <&mt6323_vmch_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; +}; + &pio { cir_pins_a:cir@0 { pins_cir { @@ -314,6 +340,17 @@ bias-pull-down; drive-strength = ; }; + + pins_wp { + pinmux = ; + input-enable; + bias-pull-up; + }; + + pins_insert { + pinmux = ; + bias-pull-up; + }; }; mmc1_pins_uhs: mmc1 { -- 2.7.4