Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752510AbdHDMHG (ORCPT ); Fri, 4 Aug 2017 08:07:06 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:11442 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752454AbdHDMG6 (ORCPT ); Fri, 4 Aug 2017 08:06:58 -0400 From: To: , , , , , , , , , , , CC: , , , , , , Subject: [PATCH v3 4/6] dt-bindings: PCI: rename and cleanup MediaTek binding text Date: Fri, 4 Aug 2017 20:06:40 +0800 Message-ID: <4209148bf2fa9bb981d44e8b0245141ccb25c23a.1501846816.git.honghui.zhang@mediatek.com> X-Mailer: git-send-email 2.6.4 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3958 Lines: 86 From: Ryder Lee In order to accommodate other SoC generations, this patch updates filename to make it more generic, regroups specific properties by SoCs, and removes redundant descriptions. Signed-off-by: Ryder Lee Signed-off-by: Honghui Zhang Acked-by: Rob Herring --- ...{mediatek,mt7623-pcie.txt => mediatek-pcie.txt} | 32 +++++++++++----------- 1 file changed, 16 insertions(+), 16 deletions(-) rename Documentation/devicetree/bindings/pci/{mediatek,mt7623-pcie.txt => mediatek-pcie.txt} (90%) diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt similarity index 90% rename from Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt rename to Documentation/devicetree/bindings/pci/mediatek-pcie.txt index fe80dda..0fdcb15 100644 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -1,18 +1,13 @@ -MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs - -PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root -ports supports a Gen2 1-lane Link and has PIPE interface to PHY. +MediaTek Gen2 PCIe controller Required properties: -- compatible: Should contain "mediatek,mt7623-pcie". +- compatible: Should contain one of the following strings: + "mediatek,mt2701-pcie" + "mediatek,mt7623-pcie" - device_type: Must be "pci" - reg: Base addresses and lengths of the PCIe controller. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: @@ -20,12 +15,6 @@ Required properties: - sys_ck0 :for clock of Port0 - sys_ck1 :for clock of Port1 - sys_ck2 :for clock of Port2 -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - pcie-rst0 :port0 reset - - pcie-rst1 :port1 reset - - pcie-rst2 :port2 reset - phys: List of PHY specifiers (used by generic PHY framework). - phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the number of PHYs as specified in *phys* property. @@ -34,6 +23,16 @@ Required properties: - bus-range: Range of bus numbers associated with this controller. - ranges: Ranges for the PCI memory and I/O regions. +Required properties for MT7623/MT2701: +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the + number of root ports. + In addition, the device tree node must have sub-nodes describing each PCIe port interface, having the following mandatory properties: @@ -85,7 +84,8 @@ Examples: <&hifsys MT2701_HIFSYS_PCIE1_RST>, <&hifsys MT2701_HIFSYS_PCIE2_RST>; reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; - phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; bus-range = <0x00 0xff>; -- 2.6.4