From: Alexandru Gagniuc <alex.g@adaptrum.com>
To: marek.vasut@gmail.com
Cc: dwmw2@infradead.org, computersforpeace@gmail.com,
        boris.brezillon@free-electrons.com, richard@nod.at,
        cyrille.pitchen@wedev4u.fr, robh+dt@kernel.org,
        linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
        Alexandru Gagniuc <alex.g@adaptrum.com>
Subject: [PATCH v2 7/7] dt-bindings: Add documentation for adaptrum,anarion-quadspi
Date: Fri,  4 Aug 2017 13:14:53 -0700
Message-Id: <20170804201453.16172-2-alex.g@adaptrum.com>
In-Reply-To: <20170804201453.16172-1-alex.g@adaptrum.com>
References: <1da97744-bc02-420e-d4e9-5ebf331475e8@gmail.com>
 <20170804201453.16172-1-alex.g@adaptrum.com>
MIME-Version: 1.0
Content-Type: text/plain
SpamDiagnosticOutput: 1:99
SpamDiagnosticMetadata: NSPM
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Aug 2017 20:15:04.0024 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-Transport-CrossTenantHeadersStamped: CY4PR04MB0840
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 1294
Lines: 38

Add devicetree binding documentation for the Anarion QSPI controller.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
---
 .../devicetree/bindings/mtd/anarion-quadspi.txt    | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/anarion-quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/anarion-quadspi.txt b/Documentation/devicetree/bindings/mtd/anarion-quadspi.txt
new file mode 100644
index 0000000..b4971e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/anarion-quadspi.txt
@@ -0,0 +1,22 @@
+* Adaptrum Anarion Quad SPI controller
+
+Required properties:
+- compatible : Should be "adaptrum,anarion-qspi".
+- reg : Contains two entries, each of which is a tuple consisting of a
+	physical address and length. The first entry is the address and
+	length of the controller register set. The second entry is the
+	address and length of the memory-mapped flash. This second region is
+	the region where the controller responds to XIP requests, and may be
+	larger than the size of the attached flash.
+
+Example:
+
+	qspi: qspi@f200f000 {
+		compatible = "adaptrum,anarion-qspi";
+		reg = 	<0xf200f000 0x1000>,
+			<0x20000000 0x08000000>;
+
+		flash0: w25q128fvn@0 {
+			...
+		}
+	};
-- 
2.9.3