Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262175AbTFZR2S (ORCPT ); Thu, 26 Jun 2003 13:28:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262179AbTFZR2S (ORCPT ); Thu, 26 Jun 2003 13:28:18 -0400 Received: from fmr04.intel.com ([143.183.121.6]:36312 "EHLO caduceus.sc.intel.com") by vger.kernel.org with ESMTP id S262175AbTFZR1p convert rfc822-to-8bit (ORCPT ); Thu, 26 Jun 2003 13:27:45 -0400 content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT X-MimeOLE: Produced By Microsoft Exchange V6.0.6375.0 Subject: RE: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading Date: Thu, 26 Jun 2003 09:29:16 -0700 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading Thread-Index: AcM76vimLfRZaHyuT3SgjeN7Lj4YGQAFH5EA From: "Pallipadi, Venkatesh" To: "Bruno Cornec" , Cc: X-OriginalArrivalTime: 26 Jun 2003 16:29:17.0485 (UTC) FILETIME=[16B0ADD0:01C33C00] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34920 Lines: 1129 Hi, Can you enable ACPI in the config and try again. With that you should be able to see all the processors. Thanks, -Venki > -----Original Message----- > From: Bruno Cornec [mailto:Bruno.Cornec@hp.com] > Sent: Thursday, June 26, 2003 7:08 AM > To: linux-kernel@vger.kernel.org > Cc: sophie.pasquier@hp.com; Pallipadi, Venkatesh > Subject: Re: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading > > > Hello, > > Thanks to Venkatesh Pallipadi, I made some progress on that problem. > I recompiled 2.4.21-ac2 and activated the CONFIG_X86_CLUSTERED_APIC > Now with HT activated in the BIOS, the machine is able to > boot but only > half of the processors are detected :-( > > I've attached my .config and the result of dmesg just after booting. > I've surely missed something so ask again for your kind support. > Thanks in advance for your help. > > Bruno Cornec (Bruno.Cornec@hp.com) said: > > (Distro SuSE SLES8 - kernel 2.4.21-ac2) > -------------------------------------------------------------------- > The latest BIOS has been put on the system (P44 - 2003-02-18) > -------------------------------------------------------------------- > cat /proc/cmdline : > root=/dev/cciss/c0d0p1 ide=nodma (16 CPUs) > > -------------------------------------------------------------------- > boot.msg > > Inspecting /boot/System.map > Loaded 18441 symbols from /boot/System.map. > Symbols match kernel version 2.4.21. > No module symbols loaded. > klogd 1.4.1, log source = ksyslog started. > <4>Linux version 2.4.21-ac2 (root@linux) (gcc version 3.2) #1 > SMP Tue Jun 24 11:09:11 CEST 2003 > <6>BIOS-provided physical RAM map: > <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) > <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) > <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > <4> BIOS-e820: 0000000100000000 - 000000040ffff000 (usable) > <5>15743MB HIGHMEM available. > <5>896MB LOWMEM available. > <4>found SMP MP-table at 000f4fd0 > <4>hm, page 000f4000 reserved twice. > <4>hm, page 000f5000 reserved twice. > <4>hm, page 000f7000 reserved twice. > <4>hm, page 000f8000 reserved twice. > <4>On node 0 totalpages: 4259839 > <4>zone(0): 4096 pages. > <4>zone(1): 225280 pages. > <4>zone(2): 4030463 pages. > <4>Intel MultiProcessor Specification v1.4 > <4> Virtual Wire compatibility mode. > <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 > <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #2 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #4 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #8 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #10 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #12 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #14 Pentium 4(tm) XEON(tm) APIC version 20 > <4>I/O APIC #8 Version 17 at 0xFEC00000. > <4>I/O APIC #9 Version 17 at 0xFEC01000. > <4>I/O APIC #10 Version 17 at 0xFEC02000. > <4>Processors: 8 > <4>xAPIC support is present > <4>Enabling APIC mode: Flat. Using 3 I/O APICs > <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma > <6>ide_setup: ide=nodma : Prevented DMA > <6>Initializing CPU#0 > <4>Detected 1999.337 MHz processor. > <4>Console: colour VGA+ 80x25 > <4>Calibrating delay loop... 3984.58 BogoMIPS > <6>Memory: 16573608k/17039356k available (1617k kernel code, > 203152k reserved, 376k data, 288k init, 15859644k highmem) > <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) > <6>Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes) > <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 0 > <6>Intel machine check architecture supported. > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <6>Enabling fast FPU save and restore... done. > <6>Enabling unmasked SIMD FPU exception support... done. > <6>Checking 'hlt' instruction... OK. > <4>POSIX conformance testing by UNIFIX > <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > <4>mtrr: detected mtrr type: Intel > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 0 > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>per-CPU timeslice cutoff: 1462.74 usecs. > <4>task migration cache decay timeout: 10 msecs. > <4>enabled ExtINT on CPU#0 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Booting processor 1/2 eip 2000 > <6>Initializing CPU#1 > <4>masked ExtINT on CPU#1 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 1 > <6>Intel machine check reporting enabled on CPU#1. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 2/4 eip 2000 > <6>Initializing CPU#2 > <4>masked ExtINT on CPU#2 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 2 > <6>Intel machine check reporting enabled on CPU#2. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 3/6 eip 2000 > <6>Initializing CPU#3 > <4>masked ExtINT on CPU#3 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 3 > <6>Intel machine check reporting enabled on CPU#3. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 4/8 eip 2000 > <6>Initializing CPU#4 > <4>masked ExtINT on CPU#4 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 4 > <6>Intel machine check reporting enabled on CPU#4. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 5/10 eip 2000 > <6>Initializing CPU#5 > <4>masked ExtINT on CPU#5 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 5 > <6>Intel machine check reporting enabled on CPU#5. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 6/12 eip 2000 > <6>Initializing CPU#6 > <4>masked ExtINT on CPU#6 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 6 > <6>Intel machine check reporting enabled on CPU#6. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 7/14 eip 2000 > <6>Initializing CPU#7 > <4>masked ExtINT on CPU#7 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 7 > <6>Intel machine check reporting enabled on CPU#7. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <6>Total of 8 processors activated (31968.46 BogoMIPS). > <4>WARNING: No sibling found for CPU 0. > <4>WARNING: No sibling found for CPU 1. > <4>WARNING: No sibling found for CPU 2. > <4>WARNING: No sibling found for CPU 3. > <4>WARNING: No sibling found for CPU 4. > <4>WARNING: No sibling found for CPU 5. > <4>WARNING: No sibling found for CPU 6. > <4>WARNING: No sibling found for CPU 7. > <4>ENABLING IO-APIC IRQs > <4>Setting 8 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 8 ... ok. > <4>Setting 9 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 9 ... ok. > <4>Setting 10 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 10 ... ok. > <7>init IO_APIC IRQs > <7> IO-APIC (apicid-pin) 8-0, 8-3, 8-5, 8-7, 8-11, 10-1, > 10-2, 10-4 not connected. > <6>..TIMER: vector=0x31 pin1=2 pin2=0 > <7>number of MP IRQ sources: 68. > <7>number of IO-APIC #8 registers: 16. > <7>number of IO-APIC #9 registers: 16. > <7>number of IO-APIC #10 registers: 16. > <6>testing the IO APIC....................... > <4> > <7>IO APIC #8...... > <7>.... register #00: 08000000 > <7>....... : physical APIC id: 08 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 08000000 > <7>....... : arbitration: 08 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 000 00 1 0 0 0 0 0 0 00 > <7> 01 0FF 0F 0 0 0 0 0 1 1 39 > <7> 02 040 00 0 0 0 0 0 1 1 31 > <7> 03 000 00 1 0 0 0 0 0 0 00 > <7> 04 0FF 0F 0 0 0 0 0 1 1 41 > <7> 05 000 00 1 0 0 0 0 0 0 00 > <7> 06 0FF 0F 0 0 0 0 0 1 1 49 > <7> 07 000 00 1 0 0 0 0 0 0 00 > <7> 08 0FF 0F 0 0 0 0 0 1 1 51 > <7> 09 0FF 0F 1 1 0 1 0 1 1 59 > <7> 0a 0FF 0F 1 1 0 1 0 1 1 61 > <7> 0b 000 00 1 0 0 0 0 0 0 00 > <7> 0c 0FF 0F 0 0 0 0 0 1 1 69 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 71 > <7> 0e 0FF 0F 0 0 0 0 0 1 1 79 > <7> 0f 0FF 0F 0 0 0 0 0 1 1 81 > <4> > <7>IO APIC #9...... > <7>.... register #00: 09000000 > <7>....... : physical APIC id: 09 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 09000000 > <7>....... : arbitration: 09 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 0FF 0F 1 1 0 1 0 1 1 89 > <7> 01 0FF 0F 1 1 0 1 0 1 1 91 > <7> 02 0FF 0F 1 1 0 1 0 1 1 99 > <7> 03 0FF 0F 1 1 0 1 0 1 1 A1 > <7> 04 0FF 0F 1 1 0 1 0 1 1 A9 > <7> 05 0FF 0F 1 1 0 1 0 1 1 B1 > <7> 06 0FF 0F 1 1 0 1 0 1 1 B9 > <7> 07 0FF 0F 1 1 0 1 0 1 1 C1 > <7> 08 0FF 0F 1 1 0 1 0 1 1 C9 > <7> 09 0FF 0F 1 1 0 1 0 1 1 D1 > <7> 0a 0FF 0F 1 1 0 1 0 1 1 D9 > <7> 0b 0FF 0F 1 1 0 1 0 1 1 E1 > <7> 0c 0FF 0F 1 1 0 1 0 1 1 E9 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 32 > <7> 0e 0FF 0F 1 1 0 1 0 1 1 3A > <7> 0f 0FF 0F 1 1 0 1 0 1 1 42 > <4> > <7>IO APIC #10...... > <7>.... register #00: 0A000000 > <7>....... : physical APIC id: 0A > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 0A000000 > <7>....... : arbitration: 0A > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 0FF 0F 1 1 0 1 0 1 1 4A > <7> 01 000 00 1 0 0 0 0 0 0 00 > <7> 02 000 00 1 0 0 0 0 0 0 00 > <7> 03 0FF 0F 1 1 0 1 0 1 1 52 > <7> 04 000 00 1 0 0 0 0 0 0 00 > <7> 05 0FF 0F 1 1 0 1 0 1 1 5A > <7> 06 0FF 0F 1 1 0 1 0 1 1 62 > <7> 07 0FF 0F 1 1 0 1 0 1 1 6A > <7> 08 0FF 0F 1 1 0 1 0 1 1 72 > <7> 09 0FF 0F 1 1 0 1 0 1 1 7A > <7> 0a 0FF 0F 1 1 0 1 0 1 1 82 > <7> 0b 0FF 0F 1 1 0 1 0 1 1 8A > <7> 0c 0FF 0F 1 1 0 1 0 1 1 92 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 9A > <7> 0e 0FF 0F 1 1 0 1 0 1 1 A2 > <7> 0f 0FF 0F 1 1 0 1 0 1 1 AA > <7>IRQ to pin mappings: > <7>IRQ0 -> 0:2 > <7>IRQ1 -> 0:1 > <7>IRQ4 -> 0:4 > <7>IRQ6 -> 0:6 > <7>IRQ8 -> 0:8 > <7>IRQ9 -> 0:9 > <7>IRQ10 -> 0:10 > <7>IRQ12 -> 0:12 > <7>IRQ13 -> 0:13 > <7>IRQ14 -> 0:14 > <7>IRQ15 -> 0:15 > <7>IRQ16 -> 1:0 > <7>IRQ17 -> 1:1 > <7>IRQ18 -> 1:2 > <7>IRQ19 -> 1:3 > <7>IRQ20 -> 1:4 > <7>IRQ21 -> 1:5 > <7>IRQ22 -> 1:6 > <7>IRQ23 -> 1:7 > <7>IRQ24 -> 1:8 > <7>IRQ25 -> 1:9 > <7>IRQ26 -> 1:10 > <7>IRQ27 -> 1:11 > <7>IRQ28 -> 1:12 > <7>IRQ29 -> 1:13 > <7>IRQ30 -> 1:14 > <7>IRQ31 -> 1:15 > <7>IRQ32 -> 2:0 > <7>IRQ35 -> 2:3 > <7>IRQ37 -> 2:5 > <7>IRQ38 -> 2:6 > <7>IRQ39 -> 2:7 > <7>IRQ40 -> 2:8 > <7>IRQ41 -> 2:9 > <7>IRQ42 -> 2:10 > <7>IRQ43 -> 2:11 > <7>IRQ44 -> 2:12 > <7>IRQ45 -> 2:13 > <7>IRQ46 -> 2:14 > <7>IRQ47 -> 2:15 > <6>.................................... done. > <4>Using local APIC timer interrupts. > <4>calibrating APIC timer ... > <4>..... CPU clock speed is 1999.1451 MHz. > <4>..... host bus clock speed is 99.9571 MHz. > <4>cpu: 0, clocks: 999571, slice: 111063 > <4>CPU0 > <4>cpu: 1, clocks: 999571, slice: 111063 > <4>cpu: 2, clocks: 999571, slice: 111063 > <4>cpu: 3, clocks: 999571, slice: 111063 > <4>cpu: 6, clocks: 999571, slice: 111063 > <4>cpu: 4, clocks: 999571, slice: 111063 > <4>cpu: 7, clocks: 999571, slice: 111063 > <4>cpu: 5, clocks: 999571, slice: 111063 > <4>CPU2 > <4>CPU1 > <4>CPU3 > <4>CPU5 > <4>CPU4 > <4>CPU6 > <4>CPU7 > <4>migration_task 0 on cpu=0 > <4>migration_task 1 on cpu=1 > <4>migration_task 2 on cpu=2 > <4>migration_task 3 on cpu=3 > <4>migration_task 4 on cpu=4 > <4>migration_task 5 on cpu=5 > <4>migration_task 6 on cpu=6 > <4>migration_task 7 on cpu=7 > <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 > <6>PCI: Using configuration type 1 > <6>PCI: Probing PCI hardware > <4>PCI: Probing PCI hardware (bus 00) > <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 > <6>PCI: Discovered primary peer bus 03 [IRQ] > <6>PCI: Discovered primary peer bus 07 [IRQ] > <6>PCI: Discovered primary peer bus 0b [IRQ] > <6>PCI: Discovered primary peer bus 0f [IRQ] > <6>PCI: Discovered primary peer bus 13 [IRQ] > <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37 > <6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41 > <6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40 > <6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10 > <6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39 > <6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32 > <6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38 > <6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43 > <6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35 > <4>PCI: Device 00:78 not found by BIOS > <4>PCI: Device 00:7b not found by BIOS > <4>PCI: Device 00:b8 not found by BIOS > <4>PCI: Device 00:c0 not found by BIOS > <4>PCI: Device 00:c2 not found by BIOS > <4>PCI: Device 00:c4 not found by BIOS > <4>PCI: Device 00:c6 not found by BIOS > <4>PCI: Device 00:c8 not found by BIOS > <4>PCI: Device 00:ca not found by BIOS > <6>Linux NET4.0 for Linux 2.4 > <6>Based upon Swansea University Computer Society NET3.039 > <4>Initializing RT netlink socket > <4>Starting kswapd > <4>allocated 32 pages and 32 bhs reserved for the highmem bounces > <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > <4>pty: 256 Unix98 ptys configured > <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS > SHARE_IRQ SERIAL_PCI enabled > <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A > <6>Floppy drive(s): fd0 is 1.44M > <6>FDC 0 is a National Semiconductor PC87306 > <6>loop: loaded (max 8 devices) > <6>HP CISS Driver (v 2.4.44) > <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <4>blk: queue c03a8b60, I/O limit 4294967295Mb (mask > 0xffffffffffffffff) > <6>Partition check: > <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > > <6> cciss/c0d1: p1 > [...] > -------------------------------------------------------------------- > > The corresponding .config is: > -------------------------------------------------------------------- > # > # Automatically generated make config: don't edit > # > CONFIG_X86=y > # CONFIG_SBUS is not set > CONFIG_UID16=y > > # > # Code maturity level options > # > # CONFIG_EXPERIMENTAL is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > # CONFIG_MODVERSIONS is not set > CONFIG_KMOD=y > > # > # Processor type and features > # > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > CONFIG_MPENTIUMIII=y > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MK8 is not set > # CONFIG_MELAN is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_X86_L1_CACHE_SHIFT=5 > CONFIG_X86_HAS_TSC=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_PGE=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_X86_F00F_WORKS_OK=y > CONFIG_X86_MCE=y > > # > # CPU Frequency scaling > # > # CONFIG_CPU_FREQ is not set > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_MICROCODE is not set > # CONFIG_X86_MSR is not set > # CONFIG_X86_CPUID is not set > # CONFIG_NOHIGHMEM is not set > # CONFIG_HIGHMEM4G is not set > CONFIG_HIGHMEM64G=y > CONFIG_HIGHMEM=y > CONFIG_X86_PAE=y > CONFIG_HIGHIO=y > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > CONFIG_SMP=y > CONFIG_X86_CLUSTERED_APIC=y > # CONFIG_X86_NUMA is not set > # CONFIG_X86_TSC_DISABLE is not set > CONFIG_X86_TSC=y > CONFIG_HAVE_DEC_LOCK=y > > # > # General setup > # > CONFIG_NET=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > # CONFIG_ISA is not set > # CONFIG_SCx200 is not set > CONFIG_PCI_NAMES=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_HOTPLUG is not set > # CONFIG_PCMCIA is not set > # CONFIG_HOTPLUG_PCI is not set > CONFIG_SYSVIPC=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > CONFIG_KCORE_ELF=y > # CONFIG_KCORE_AOUT is not set > # CONFIG_BINFMT_AOUT is not set > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > # CONFIG_IKCONFIG is not set > # CONFIG_PM is not set > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > # CONFIG_APM_DO_ENABLE is not set > # CONFIG_APM_CPU_IDLE is not set > # CONFIG_APM_DISPLAY_BLANK is not set > # CONFIG_APM_RTC_IS_GMT is not set > # CONFIG_APM_ALLOW_INTS is not set > # CONFIG_APM_REAL_MODE_POWER_OFF is not set > > # > # ACPI Support > # > # CONFIG_ACPI is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play configuration > # > # CONFIG_PNP is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_CPQ_DA is not set > CONFIG_BLK_CPQ_CISS_DA=y > # CONFIG_CISS_SCSI_TAPE is not set > # CONFIG_BLK_DEV_DAC960 is not set > CONFIG_BLK_DEV_LOOP=y > CONFIG_BLK_DEV_NBD=m > CONFIG_BLK_DEV_RAM=m > CONFIG_BLK_DEV_RAM_SIZE=4096 > # CONFIG_BLK_STATS is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > # CONFIG_NETLINK_DEV is not set > # CONFIG_NETFILTER is not set > # CONFIG_FILTER is not set > CONFIG_UNIX=y > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_INET_ECN is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_VLAN_8021Q is not set > > # > # > # > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > > # > # Appletalk devices > # > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # ATA/IDE/MFM/RLL support > # > CONFIG_IDE=y > > # > # IDE, ATA and ATAPI Block devices > # > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_HD_IDE is not set > # CONFIG_BLK_DEV_HD is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > # CONFIG_IDEDISK_STROKE is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_BLK_DEV_CMD640=y > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set > CONFIG_BLK_DEV_IDEPCI=y > # CONFIG_BLK_DEV_GENERIC is not set > CONFIG_IDEPCI_SHARE_IRQ=y > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_BLK_DEV_ADMA100 is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > CONFIG_BLK_DEV_PIIX=y > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > CONFIG_BLK_DEV_RZ1000=y > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_SVWKS=y > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_IDEDMA_IVB is not set > # CONFIG_DMA_NONPCI is not set > CONFIG_BLK_DEV_IDE_MODES=y > > # > # SCSI support > # > CONFIG_SCSI=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > CONFIG_SD_EXTRA_DEVS=40 > CONFIG_CHR_DEV_ST=m > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > CONFIG_CHR_DEV_SG=m > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > CONFIG_SCSI_DEBUG_QUEUES=y > CONFIG_SCSI_MULTI_LUN=y > CONFIG_SCSI_CONSTANTS=y > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AHA1740 is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_MEGARAID is not set > # CONFIG_SCSI_MEGARAID2 is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_DMA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_NCR53C7xx is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_NCR53C8XX is not set > # CONFIG_SCSI_SYM53C8XX is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PCI2000 is not set > # CONFIG_SCSI_PCI2220I is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_ISP is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_SEAGATE is not set > # CONFIG_SCSI_SIM710 is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_BOOT is not set > # CONFIG_FUSION_ISENSE is not set > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LAN is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > CONFIG_DUMMY=m > CONFIG_BONDING=m > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # Ethernet (10 or 100Mbit) > # > # CONFIG_NET_ETHERNET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_R8169 is not set > # CONFIG_SK98LIN is not set > CONFIG_TIGON3=y > # CONFIG_FDDI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > # CONFIG_NET_FC is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Input core support > # > # CONFIG_INPUT is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_SERIAL=y > # CONFIG_SERIAL_CONSOLE is not set > # CONFIG_SERIAL_EXTENDED is not set > # CONFIG_SERIAL_NONSTANDARD is not set > CONFIG_UNIX98_PTYS=y > CONFIG_UNIX98_PTY_COUNT=256 > # CONFIG_HVC_CONSOLE is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Mice > # > # CONFIG_BUSMOUSE is not set > CONFIG_MOUSE=y > CONFIG_PSMOUSE=y > # CONFIG_82C710_MOUSE is not set > # CONFIG_PC110_PAD is not set > # CONFIG_MK712_MOUSE is not set > > # > # Joysticks > # > # CONFIG_INPUT_GAMEPORT is not set > > # > # Input core support is needed for gameports > # > > # > # Input core support is needed for joysticks > # > # CONFIG_QIC02_TAPE is not set > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_AMD_RNG is not set > # CONFIG_INTEL_RNG is not set > # CONFIG_AMD_PM768 is not set > # CONFIG_NVRAM is not set > # CONFIG_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # File systems > # > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > CONFIG_AUTOFS4_FS=y > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > CONFIG_REISERFS_PROC_INFO=y > CONFIG_EXT3_FS=m > CONFIG_JBD=m > # CONFIG_JBD_DEBUG is not set > CONFIG_FAT_FS=m > CONFIG_MSDOS_FS=m > # CONFIG_UMSDOS_FS is not set > CONFIG_VFAT_FS=m > # CONFIG_CRAMFS is not set > CONFIG_TMPFS=y > CONFIG_RAMFS=y > CONFIG_ISO9660_FS=y > # CONFIG_JOLIET is not set > # CONFIG_ZISOFS is not set > # CONFIG_JFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_NTFS_FS is not set > # CONFIG_HPFS_FS is not set > CONFIG_PROC_FS=y > CONFIG_DEVPTS_FS=y > # CONFIG_QNX4FS_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_EXT2_FS=y > # CONFIG_SYSV_FS is not set > # CONFIG_UDF_FS is not set > # CONFIG_UFS_FS is not set > # CONFIG_XFS_FS is not set > > # > # Network File Systems > # > # CONFIG_CODA_FS is not set > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > CONFIG_NFSD=y > CONFIG_NFSD_V3=y > CONFIG_SUNRPC=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_NCP_FS is not set > # CONFIG_ZISOFS_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > CONFIG_SMB_NLS=y > CONFIG_NLS=y > > # > # Native Language Support > # > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ISO8859_1 is not set > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Console drivers > # > CONFIG_VGA_CONSOLE=y > # CONFIG_VIDEO_SELECT is not set > > # > # Sound > # > # CONFIG_SOUND is not set > > # > # USB support > # > # CONFIG_USB is not set > > # > # Bluetooth support > # > # CONFIG_BLUEZ is not set > > # > # Kernel hacking > # > CONFIG_DEBUG_KERNEL=y > # CONFIG_DEBUG_STACKOVERFLOW is not set > # CONFIG_FRAME_POINTER is not set > # CONFIG_DEBUG_HIGHMEM is not set > # CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_IOVIRT is not set > CONFIG_MAGIC_SYSRQ=y > # CONFIG_PANIC_MORSE is not set > # CONFIG_DEBUG_SPINLOCK is not set > > # > # Library routines > # > # CONFIG_CRC32 is not set > # CONFIG_ZLIB_INFLATE is not set > # CONFIG_ZLIB_DEFLATE is not set > -------------------------------------------------------------------- > -- > Linux Solution Consultant T?l: +33 476 143 278 - Fax: > +33 476 146 105 > HP/Intel Solution Center http://hpintelco.net Hewlett-Packard > Grenoble/France > Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/