Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 4 Mar 2001 15:36:03 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 4 Mar 2001 15:35:54 -0500 Received: from sunbeam.cs.biu.ac.il ([132.70.1.24]:64392 "EHLO sunbeam.cs.biu.ac.il") by vger.kernel.org with ESMTP id ; Sun, 4 Mar 2001 15:35:40 -0500 Date: Sun, 4 Mar 2001 22:33:50 +0200 (IST) From: Yuval Krymolowski To: linux-kernel@vger.kernel.org Subject: Can Linux 2.4.x boot from UDMA-100 disk ? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I have a system with ABIT BX-133/RAID mother-board, and run Gentus Linux booted from /dev/hde, which is UDMA/100 IBM-DTLA-307030 drive. The following lines of the boot-log can provide information about the system (kernel version 2.2.15-3.0). Would it be possible to boot kernel 2.4.x from the UDMA/100 drive ? in http://www.linux-ide.org/ultra100.html it is not mentioned if the patches can help with boot. Thanks, Yuval Krymolowski, yuvalk@cs.biu.ac.il (I will check the list but please CC me as well). kernel: Uniform Multi-Platform E-IDE driver Revision: 6.30 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: PIIX4: IDE controller on PCI bus 00 dev 39 kernel: PIIX4: not 100% native mode: will probe irqs later kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio kernel: HPT370: IDE controller on PCI bus 00 dev 98 kernel: HPT370: not 100% native mode: will probe irqs later kernel: HPT370: reg5ah=0x01 ATA-66 Cable Port0 kernel: ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:pio, hdf:pio kernel: HPT370: reg5ah=0x01 ATA-66 Cable Port0 kernel: ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:DMA, hdh:pio kernel: hda: FX4820T, ATAPI CDROM drive kernel: hdc: SAMSUNG COMBO SM-304B, ATAPI CDROM drive kernel: hde: IBM-DTLA-307030, ATA DISK drive kernel: hdg: WDC WD136AA, ATA DISK drive kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 kernel: ide1 at 0x170-0x177,0x376 on irq 15 kernel: ide2 at 0xd800-0xd807,0xdc02 on irq 11 kernel: ide3 at 0xe000-0xe007,0xe402 on irq 11 (shared with ide2) kernel: hde: IBM-DTLA-307030, 29314MB w/1916kB Cache, CHS=3737/255/63, UDMA(100) kernel: hdg: WDC WD136AA, 12971MB w/2048kB Cache, CHS=1653/255/63, UDMA(33) kernel: hda: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 kernel: raid5: measuring checksumming speed kernel: raid5: MMX detected, trying high-speed MMX checksum routines kernel: pII_mmx : 1777.746 MB/sec kernel: p5_mmx : 1836.039 MB/sec kernel: 8regs : 1376.172 MB/sec kernel: 32regs : 783.336 MB/sec kernel: using fastest function: p5_mmx (1836.039 MB/sec) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/