Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264559AbTF0PNm (ORCPT ); Fri, 27 Jun 2003 11:13:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264682AbTF0PMJ (ORCPT ); Fri, 27 Jun 2003 11:12:09 -0400 Received: from tomts22-srv.bellnexxia.net ([209.226.175.184]:10727 "EHLO tomts22-srv.bellnexxia.net") by vger.kernel.org with ESMTP id S264547AbTF0PJt (ORCPT ); Fri, 27 Jun 2003 11:09:49 -0400 Subject: 2.5.73-mm1 Uninitialised timer warnings From: Shane Shrybman To: linux-kernel Content-Type: text/plain Organization: Message-Id: <1056727439.2358.9.camel@mars.goatskin.org> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.4 Date: 27 Jun 2003 11:23:59 -0400 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17645 Lines: 440 Hi, Below is my dmesg output which contains several uninitialized timer warnings. I assume someone wants to see them or else why print the warning. :-) BTW: Only three warnings during the compile of this kernel! Linux version 2.5.73-mm1 (shane@mars.goatskin.org) (gcc version 2.96 20000731 (Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri Jun 27 10:47:16 EDT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000018000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 384MB LOWMEM available. On node 0 totalpages: 98304 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 94208 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=2.5.73-mm1 ro root=301 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1195.285 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2385.51 BogoMIPS Memory: 386072k/393216k available (1475k kernel code, 6388k reserved, 503k data, 292k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1195.2690 MHz. ..... host bus clock speed is 265.6153 MHz. mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 8d & 1f -> 0d PCI: Using IRQ router VIA [1106/0686] at 00:07.0 spurious 8259A interrupt: IRQ7. pty: 256 Unix98 ptys configured Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Enabling SEP on CPU 0 Journalled Block Device driver loaded udf: registering filesystem Initializing Cryptographic API Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A anticipatory scheduling elevator Uninitialised timer! This is just a warning. Your computer is OK function=0xc01e9d60, data=0x0 Call Trace: [] check_timer_failed+0x3e/0x50 [] floppy_shutdown+0x0/0xb0 [] del_timer+0x18/0xb0 [] blk_init_queue+0x111/0x130 [] reschedule_timeout+0x21/0xa0 [] floppy_init+0x144/0x530 [] do_fd_request+0x0/0x90 [] do_initcalls+0x39/0x90 [] init+0x38/0x1a0 [] init+0x0/0x1a0 [] kernel_thread_helper+0x5/0xc Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DJNA-352030, ATA DISK drive hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20269: IDE controller at PCI slot 00:08.0 PCI: Found IRQ 10 for device 00:08.0 PCI: Sharing IRQ 10 with 00:0c.0 PDC20269: chipset revision 2 PDC20269: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio hde: IBM-DJNA-352030, ATA DISK drive ide2 at 0xcc00-0xcc07,0xd002 on irq 10 hdg: MAXTOR 6L080J4, ATA DISK drive ide3 at 0xd400-0xd407,0xd802 on irq 10 hda: max request size: 128KiB hda: host protected area => 1 hda: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=39560/16/63 hda: hda1 hda2 hda3 hda4 < hda5 > hde: max request size: 128KiB hde: host protected area => 1 hde: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=39560/16/63, UDMA(33) hde: hde1 hde2 hde3 hde4 < hde5 > hdg: max request size: 128KiB hdg: host protected area => 1 hdg: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63, UDMA(133) hdg: unknown partition table hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c /dev entries driver module version 2.7.0 (20021208) NET4: Linux TCP/IP 1.0 for NET4.0 input: AT Set 2 keyboard on isa0060/serio0 IP: routing cache hash table of 4096 buckets, 32Kbytes Uninitialised timer! This is just a warning. Your computer is OK function=0xc022e350, data=0x0 Call Trace: [] check_timer_failed+0x3e/0x50 [] peer_check_expire+0x0/0xe0 [] peer_check_expire+0x0/0xe0 [] add_timer+0x50/0xa0 [] kmem_cache_create+0x25c/0x3f0 [] inet_initpeers+0x7e/0x90 [] xfrm4_input_init+0x17/0x40 [] ip_rt_init+0x298/0x2c0 [] create_proc_entry+0x96/0xb0 [] ip_init+0x17/0x40 [] inet_init+0x14c/0x190 [] do_initcalls+0x39/0x90 [] init+0x38/0x1a0 [] init+0x0/0x1a0 [] kernel_thread_helper+0x5/0xc TCP: Hash tables configured (established 32768 bind 65536) Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 292k freed Uninitialised timer! This is just a warning. Your computer is OK function=0xc012a800, data=0xc02b83a0 Call Trace: [] check_timer_failed+0x3e/0x50 [] delayed_work_timer_fn+0x0/0x60 [] delayed_work_timer_fn+0x0/0x60 [] add_timer+0x50/0xa0 [] queue_delayed_work+0x5b/0x80 [] batch_entropy_store+0x7e/0x90 [] add_timer_randomness+0xcb/0xe0 [] add_disk_randomness+0x2b/0x30 [] ide_end_request+0x93/0x120 [] ide_dma_intr+0x59/0x90 [] ide_intr+0xf2/0x170 [] ide_dma_intr+0x0/0x90 [] handle_IRQ_event+0x3c/0x60 [] do_IRQ+0xa0/0x140 [] common_interrupt+0x18/0x20 [] default_idle+0x24/0x30 [] apm_cpu_idle+0x125/0x170 [] apm_cpu_idle+0x0/0x170 [] default_idle+0x0/0x30 [] cpu_idle+0x32/0x50 [] _stext+0x0/0x50 [] start_kernel+0x16e/0x180 Real Time Clock Driver v1.11 device-mapper: 1.0.6-ioctl (2002-10-15) initialised: dm@uk.sistina.com cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. Adding 128512k swap on /dev/hda2. Priority:5 extents:1 Adding 128512k swap on /dev/hde2. Priority:5 extents:1 bttv: driver version 0.9.4 loaded bttv: using 16 buffers with 2080k (520 pages) each for capture bttv: Host bridge is VIA Technologies, In VT8363/8365 [KT133/K bttv: Host bridge is VIA Technologies, In VT82C686 [Apollo Sup bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:08.0 bttv0: Bt848 (rev 18) at 00:0c.0, irq: 10, latency: 32, mmio: 0xe3005000 bttv0: using: BT848A(Zoltrix TV-Max) [card=15,insmod option] bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner: chip found @ 0xc0 tuner(bttv): type forced to 6 (Temic NTSC (4032 FY5)) [insmod] registering 0-0060 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on dm-9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on dm-14, internal journal EXT3-fs: mounted filesystem with ordered data mode. PCI: Found IRQ 11 for device 00:0a.0 IRQ routing conflict for 00:07.2, have irq 10, want irq 11 IRQ routing conflict for 00:07.3, have irq 10, want irq 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0a.0: 3Com PCI 3c905C Tornado at 0xe000. Vers LK1.1.19 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 11 for device 00:07.2 IRQ routing conflict for 00:07.2, have irq 10, want irq 11 IRQ routing conflict for 00:07.3, have irq 10, want irq 11 PCI: Sharing IRQ 11 with 00:0a.0 uhci-hcd 0000:00:07.2: VIA Technologies, In USB uhci-hcd 0000:00:07.2: irq 10, io base 0000c400 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci-hcd 0000:00:07.2: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: VIA Technologies, In USB usb usb1: Manufacturer: Linux 2.5.73-mm1 uhci-hcd usb usb1: SerialNumber: 00:07.2 usb usb1: usb_new_device - registering interface 1-0:0 hub 1-0:0: usb_device_probe hub 1-0:0: usb_device_probe - got id hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected hub 1-0:0: standalone hub hub 1-0:0: ganged power switching hub 1-0:0: global over-current protection hub 1-0:0: Port indicators are not supported hub 1-0:0: power on to power good time: 2ms hub 1-0:0: hub controller current requirement: 0mA hub 1-0:0: local power source is good hub 1-0:0: no over-current condition exists hub 1-0:0: enabling power on all ports PCI: Found IRQ 11 for device 00:07.3 IRQ routing conflict for 00:07.2, have irq 10, want irq 11 IRQ routing conflict for 00:07.3, have irq 10, want irq 11 PCI: Sharing IRQ 11 with 00:0a.0 uhci-hcd 0000:00:07.3: VIA Technologies, In USB (#2) uhci-hcd 0000:00:07.3: irq 10, io base 0000c800 uhci-hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci-hcd 0000:00:07.3: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: VIA Technologies, In USB (#2) usb usb2: Manufacturer: Linux 2.5.73-mm1 uhci-hcd usb usb2: SerialNumber: 00:07.3 usb usb2: usb_new_device - registering interface 2-0:0 hub 2-0:0: usb_device_probe hub 2-0:0: usb_device_probe - got id hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected hub 2-0:0: standalone hub hub 2-0:0: ganged power switching hub 2-0:0: global over-current protection hub 2-0:0: Port indicators are not supported hub 2-0:0: power on to power good time: 2ms hub 2-0:0: hub controller current requirement: 0mA hub 2-0:0: local power source is good hub 2-0:0: no over-current condition exists hub 2-0:0: enabling power on all ports Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. hub 1-0:0: port 1, status 301, change 3, 1.5 Mb/s hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 hub 1-0:0: new USB device on port 1, assigned address 2 usb 1-1: new device strings: Mfr=1, Product=0, SerialNumber=0 usb 1-1: Manufacturer: Logitech usb 1-1: usb_new_device - registering interface 1-1:0 hub 1-0:0: port 2, status 100, change 3, 12 Mb/s hub 1-0:0: port 2 enable change, status 100 hub 2-0:0: port 1, status 100, change 3, 12 Mb/s hub 2-0:0: port 2, status 100, change 3, 12 Mb/s hub 2-0:0: port 1 enable change, status 100 hub 2-0:0: port 2 enable change, status 100 drivers/usb/host/uhci-hcd.c: c800: suspend_hc hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { DriveStatusError } hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { DriveStatusError } cdrom: open failed. hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04Aborted Command hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hde: drive_cmd: error=0x04 { DriveStatusError } SCSI subsystem initialized parport_pc: Via 686A parallel port disabled in BIOS lp: driver loaded but no devices found Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Module nfsd cannot be unloaded due to unsafe usage in include/linux/module.h:479 Module lockd cannot be unloaded due to unsafe usage in include/linux/module.h:479 PCI: Found IRQ 5 for device 00:0d.0 warning: process `update' used the obsolete bdflush system call Fix your initscripts? warning: process `update' used the obsolete bdflush system call Fix your initscripts? Uninitialised timer! This is just a warning. Your computer is OK function=0xc01cf8f0, data=0x0 Call Trace: [] check_timer_failed+0x3e/0x50 [] kd_nosound+0x0/0x70 [] del_timer+0x18/0xb0 [] csi_K+0xc2/0x100 [] kd_mksound+0x15/0xb0 [] do_con_write+0x5b4/0x680 [] vgacon_cursor+0x19d/0x1b0 [] con_write+0x18/0x30 [] opost_block+0x1bc/0x1d0 [] set_cursor+0x66/0x80 [] write_chan+0x175/0x210 [] default_wake_function+0x0/0x20 [] default_wake_function+0x0/0x20 [] default_wake_function+0x0/0x20 [] default_wake_function+0x0/0x20 [] tty_write+0x21f/0x2d0 [] write_chan+0x0/0x210 [] do_brk+0x115/0x1d0 [] vfs_write+0xa9/0xe0 [] sys_write+0x2d/0x50 [] syscall_call+0x7/0xb drivers/usb/core/usb.c: registered new driver hiddev hid 1-1:0: usb_device_probe hid 1-1:0: usb_device_probe - got id input: USB HID v1.00 Mouse [Logitech] on usb-00:07.2-1 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Uninitialised timer! This is just a warning. Your computer is OK function=0xc024a060, data=0x0 Call Trace: [] check_timer_failed+0x3e/0x50 [] tcp_twkill+0x0/0xf0 [] tcp_twkill+0x0/0xf0 [] mod_timer+0x30/0x180 [] __kfree_skb+0xac/0xc0 [] tcp_tw_schedule+0x15d/0x180 [] tcp_time_wait+0x164/0x240 [] tcp_ack+0x115/0x330 [] tcp_rcv_state_process+0x66d/0x830 [] autoremove_wake_function+0x0/0x40 [] tcp_v4_do_rcv+0xb5/0x100 [] tcp_v4_rcv+0x4bd/0x7b0 [] ip_route_input+0x3f/0x1b0 [] ip_local_deliver+0x103/0x1c0 [] ip_rcv+0x1a5/0x390 [] ip_rcv+0x317/0x390 [] boomerang_rx+0x2cb/0x470 [3c59x] [] netif_receive_skb+0x17e/0x1d0 [] do_poll+0x6e/0xd0 [] process_backlog+0x6d/0x130 [] net_rx_action+0x7c/0x130 [] do_softirq+0x4b/0xa0 [] do_IRQ+0x119/0x140 [] common_interrupt+0x18/0x20 Regards, Shane - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/