Date: Mon, 14 Aug 2017 13:51:30 +0300
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Peter Huewe <PeterHuewe@gmx.de>,
        Ken Goldman <kgold@linux.vnet.ibm.com>,
        linux-ima-devel@lists.sourceforge.net,
        linux-security-module@vger.kernel.org,
        tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: Re: Re: [tpmdd-devel] [PATCH] tpm: improve tpm_tis send()
 performance by ignoring burstcount
Message-ID: <20170814105130.4jjdcop4mqkoxhgh@linux.intel.com>
References: <20170807114632.1339-1-nayna@linux.vnet.ibm.com>
 <E37DFCB0-2E74-45F6-B2DF-70EF59F310BC@gmx.de>
 <20170808191145.kggmoczd5laiccrn@linux.intel.com>
 <db0359cc-5e6b-2055-734a-bd9104e4a99f@linux.vnet.ibm.com>
 <trinity-b615e596-8095-4a0a-9922-3fa9a5724c30-1502312435959@3c-app-gmx-bs76>
 <20170811111421.bg2we53rdeecjtac@linux.intel.com>
 <1502465419.3579.109.camel@linux.vnet.ibm.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <1502465419.3579.109.camel@linux.vnet.ibm.com>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
User-Agent: NeoMutt/20170609 (1.8.3)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3877
Lines: 85

On Fri, Aug 11, 2017 at 11:30:19AM -0400, Mimi Zohar wrote:
> On Fri, 2017-08-11 at 14:14 +0300, Jarkko Sakkinen wrote:
> > On Wed, Aug 09, 2017 at 11:00:36PM +0200, Peter Huewe wrote:
> > > Hi Ken,
> > > (again speaking only on my behalf, not my employer)
> > > 
> > > > Does anyone know of platforms where this occurs?
> > > > I suspect (but not sure) that the days of SuperIO connecting floppy
> > > > drives, printer ports, and PS/2 mouse ports on the LPC bus are over, and
> > > > such legacy systems will not have a TPM. Would SuperIO even support the
> > > > special TPM LPC bus cycles?
> > > 
> > > Since we are the linux kernel, we do have to care for legacy devices.
> > > And a system with LPC, PS2Mouse on SuperIO and a TPM are not that uncommon.
> > > 
> > > And heck, we even have support for 1.1b TPM devices....
> > > 
> > > 
> > > >> One more viewpoint: TCG must added the burst count for a reason (might
> > > >> be very well related what Peter said). Is ignoring it something that TCG
> > > >> recommends? Not following standard exactly in the driver code sometimes
> > > >> makes sense on *small details* but I would not say that this a small
> > > >> detail...
> > > 
> > > > I checked with the TCG's device driver work group (DDWG). Both the spec
> > > > editor and 3 TPM vendors - Infineon, Nuvoton, and ST Micro - agreed that
> > > > ignoring burst count may incur wait states but nothing more. Operations
> > > > will still be successful.
> > > 
> > > Interesting - let me check with Georg tomorrow.
> > > Unfortunately I do not have access to my tcg mails from home (since I'm not working :), 
> > > but did you _explicitly_ talk about LPC and the system?
> > > I'm sure the TPM does not care about the waitstates...
> > > 
> > > If my memory does not betray me, 
> > > it is actually possible to "freeze up" a system completly by flooding the lpc bus.
> > > Let me double check tomorrow...
> > > 
> > > 
> > > In anycase - I really would like to see a much more performant tpm subsystem - 
> > > however it will be quite an effort with a lot of legacy testing.
> > > (which I unfortunately cannot spend on my private time ... and also of course lacking test systems).
> > > 
> > > Thanks,
> > > Peter
> > 
> > I would like to see tpm_msleep() wrapper to replace current msleep()
> > usage across the subsystem before considering this. I.e. wrapper that
> > internally uses usleep_range(). This way we can mechanically convert
> > everything to a more low latency option.
> 
> Fine. ?I assume you meant tpm_sleep(), not tpm_msleep().

I think it would sense to have a function that takes msecs because msecs
are mostly used everywhere in the subsystem. This way we don't have to
change any of the existing constants.

> > This should have been done already for patch that Mini and Nayna
> > provided instead of open coding stuff.
> 
> At that time, we had no idea what caused the major change in TPM
> performance. ?We only knew that the change occurred somewhere between
> linux-4.7 and linux-4.8. ?Even after figuring out it was the change to
> msleep(), we were hoping that msleep() would be fixed. ?So your
> comment, that we should have done it differently back then, is
> unwarranted.

I wasn't trying to point the blame to you at all. I didn't bring this to
table back then myself. I agree what you are saying.

I was mainly trying to explain why I think it should be done this way
now while I didn't suggest it back then :-)

> > That change is something that can be applied right now. On the other
> > hand, this is a very controversial change.
> 
> Since the main concern about this change is breaking old systems that
> might potentially have other peripherals hanging off the LPC bus, can
> we define a new Kconfig option, with the default as 'N'?
> 
> Mimi

I guess that could make sense but I would like to hear feedback first.

/Jarkko