Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753222AbdHNMQV (ORCPT ); Mon, 14 Aug 2017 08:16:21 -0400 Received: from fllnx209.ext.ti.com ([198.47.19.16]:61039 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753072AbdHNMQU (ORCPT ); Mon, 14 Aug 2017 08:16:20 -0400 From: "Reizer, Eyal" To: Kalle Valo , ",Tony Lindgren" , "linux-wireless@vger.kernel.org" , "linux-kernel@vger.kernel.org" CC: "sebastian.reichel@collabora.co.uk" , Julian Calaby Subject: [v7 wlcore: add missing nvs file name info for wilink8 Thread-Topic: [v7 wlcore: add missing nvs file name info for wilink8 Thread-Index: AdMU9uXcwX07zbMgRqms3FNMF6dkvA== Date: Mon, 14 Aug 2017 12:15:16 +0000 Message-ID: <8665E2433BC68541A24DFFCA87B70F5B36425E3C@DFRE01.ent.ti.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.167.188.94] x-exclaimer-md-config: f9c360f5-3d1e-4c3c-8703-f45bf52eff6b Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by nfs id v7ECGRCd000887 Content-Length: 4442 Lines: 111 The following commits: commit c815fdebef44 ("wlcore: spi: Populate config firmware data") commit d776fc86b82f ("wlcore: sdio: Populate config firmware data") Populated the nvs entry for wilink6 and wilink7 only while it is still needed for wilink8 as well. This broke user space backward compatibility when upgrading from older kernels, as the alternate mac address would not be read from the nvs that is present in the file system (lib/firmware/ti-connectivity/wl1271-nvs.bin) causing mac address change of the wlan interface. This patch fix this and update the structure field with the same default nvs file name that has been used before. In addition, some distros hold a default wl1271-nvs.bin in the file system with a bogus mac address (deadbeef...) that overrides the mac address that is stored inside the device. Warn users about this bogus mac address and use the internal mac address Fixes: c815fdebef44 ("wlcore: spi: Populate config firmware data") Fixes: d776fc86b82f ("wlcore: sdio: Populate config firmware data") Signed-off-by: Eyal Reizer --- v2->v3: add a check for default deadbeef... mac address and warn about it v3->v4: use a random TI mac address instead of the bogus one v4->v5: add constant definition for TI oui address v5->v6: after also verifying on wilink6/7 Use mac internal mac address instead of a random one v6->v7: use random mac in case internal mac is zero --- drivers/net/wireless/ti/wlcore/main.c | 23 +++++++++++++++++++++++ drivers/net/wireless/ti/wlcore/sdio.c | 1 + drivers/net/wireless/ti/wlcore/spi.c | 1 + drivers/net/wireless/ti/wlcore/wlcore.h | 3 +++ 4 files changed, 28 insertions(+) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 60aaa85..40692ac 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -6040,6 +6040,29 @@ static int wl1271_register_hw(struct wl1271 *wl) nic_addr = wl->fuse_nic_addr + 1; } + if (oui_addr == 0xdeadbe && nic_addr == 0xef0000) { + wl1271_warning("Detected unconfigured mac address in nvs.\n" + "derive from fuse instead.\n" + "in case of using a wl12xx device, your " + "device performance may not be optimized.\n" + "Please use the calibrator tool to configure " + "your device.\n" + "When using a wl18xx device this default nvs " + "file can be removed from the file system\n"); + + if (wl->fuse_oui_addr == 0 && wl->fuse_nic_addr == 0) { + wl1271_warning("Fuse mac address is zero. using " + "random mac\n"); + /* Use TI oui and a random nic */ + oui_addr = WLCORE_TI_OUI_ADDRESS; + nic_addr = get_random_int(); + } else { + oui_addr = wl->fuse_oui_addr; + /* fuse has the BD_ADDR, the WLAN addresses are the next two */ + nic_addr = wl->fuse_nic_addr + 1; + } + } + wl12xx_derive_mac_addresses(wl, oui_addr, nic_addr); ret = ieee80211_register_hw(wl->hw); diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 2fb3871..f8a1fea 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -230,6 +230,7 @@ static const struct wilink_family_data wl128x_data = { static const struct wilink_family_data wl18xx_data = { .name = "wl18xx", .cfg_name = "ti-connectivity/wl18xx-conf.bin", + .nvs_name = "ti-connectivity/wl1271-nvs.bin", }; static const struct of_device_id wlcore_sdio_of_match_table[] = { diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index fdabb92..62ce54a 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -92,6 +92,7 @@ static const struct wilink_family_data wl128x_data = { static const struct wilink_family_data wl18xx_data = { .name = "wl18xx", .cfg_name = "ti-connectivity/wl18xx-conf.bin", + .nvs_name = "ti-connectivity/wl1271-nvs.bin", }; struct wl12xx_spi_glue { diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 1827546..95fbedc 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -40,6 +40,9 @@ /* wl12xx/wl18xx maximum transmission power (in dBm) */ #define WLCORE_MAX_TXPWR 25 +/* Texas Instruments pre assigned OUI */ +#define WLCORE_TI_OUI_ADDRESS 0x080028 + /* forward declaration */ struct wl1271_tx_hw_descr; enum wl_rx_buf_align; -- 2.7.4