Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753525AbdHNP0q (ORCPT ); Mon, 14 Aug 2017 11:26:46 -0400 Received: from mx0b-001b2d01.pphosted.com ([148.163.158.5]:46219 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753511AbdHNP0m (ORCPT ); Mon, 14 Aug 2017 11:26:42 -0400 From: Eddie James To: linux@roeck-us.net Cc: robh+dt@kernel.org, jdelvare@suse.com, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, corbet@lwn.net, linux-doc@vger.kernel.org, eajames@linux.vnet.ibm.com, "Edward A. James" Subject: [PATCH v3 2/3] hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver Date: Mon, 14 Aug 2017 10:26:29 -0500 X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1502724390-17411-1-git-send-email-eajames@linux.vnet.ibm.com> References: <1502724390-17411-1-git-send-email-eajames@linux.vnet.ibm.com> X-TM-AS-GCONF: 00 x-cbid: 17081415-0008-0000-0000-000008654781 X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00007543; HX=3.00000241; KW=3.00000007; PH=3.00000004; SC=3.00000220; SDB=6.00902233; UDB=6.00451859; IPR=6.00682448; BA=6.00005531; NDR=6.00000001; ZLA=6.00000005; ZF=6.00000009; ZB=6.00000000; ZP=6.00000000; ZH=6.00000000; ZU=6.00000002; MB=3.00016689; XFM=3.00000015; UTC=2017-08-14 15:26:39 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 17081415-0009-0000-0000-00004388F1BB Message-Id: <1502724390-17411-3-git-send-email-eajames@linux.vnet.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-08-14_14:,, signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=1 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1706020000 definitions=main-1708140250 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5758 Lines: 205 From: "Edward A. James" Add the driver to monitor IBM CFF power supplies with hwmon over pmbus. Signed-off-by: Edward A. James --- drivers/hwmon/pmbus/Kconfig | 10 +++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/ibm-cffps.c | 151 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 162 insertions(+) create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 68d717a..f3de18a 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -37,6 +37,16 @@ config SENSORS_ADM1275 This driver can also be built as a module. If so, the module will be called adm1275. +config SENSORS_IBM_CFFPS + tristate "IBM Common Form Factor Power Supply" + default n + help + If you say yes here you get hardware monitoring support for the IBM + Common Form Factor power supply. + + This driver can also be built as a module. If so, the module will + be called ibm-cffps. + config SENSORS_IR35221 tristate "Infineon IR35221" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 75bb7ca..737fa4e 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o +obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o obj-$(CONFIG_SENSORS_IR35221) += ir35221.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c new file mode 100644 index 0000000..1a6294c --- /dev/null +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -0,0 +1,151 @@ +/* + * Copyright 2017 IBM Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#include "pmbus.h" + +/* STATUS_MFR_SPECIFIC bits */ +#define CFFPS_MFR_FAN_FAULT BIT(0) +#define CFFPS_MFR_THERMAL_FAULT BIT(1) +#define CFFPS_MFR_OV_FAULT BIT(2) +#define CFFPS_MFR_UV_FAULT BIT(3) +#define CFFPS_MFR_PS_KILL BIT(4) +#define CFFPS_MFR_OC_FAULT BIT(5) +#define CFFPS_MFR_VAUX_FAULT BIT(6) +#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7) + +static int ibm_cffps_read_byte_data(struct i2c_client *client, int page, + int reg) +{ + int rc, mfr; + + switch (reg) { + case PMBUS_STATUS_VOUT: + case PMBUS_STATUS_IOUT: + case PMBUS_STATUS_TEMPERATURE: + case PMBUS_STATUS_FAN_12: + rc = pmbus_read_byte_data(client, page, reg); + if (rc < 0) + return rc; + + mfr = pmbus_read_byte_data(client, page, + PMBUS_STATUS_MFR_SPECIFIC); + if (mfr < 0) + /* + * Return the status register instead of an error, + * since we successfully read status. + */ + return rc; + + /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */ + if (reg == PMBUS_STATUS_FAN_12) { + if (mfr & CFFPS_MFR_FAN_FAULT) + rc |= PB_FAN_FAN1_FAULT; + } else if (reg == PMBUS_STATUS_TEMPERATURE) { + if (mfr & CFFPS_MFR_THERMAL_FAULT) + rc |= PB_TEMP_OT_FAULT; + } else if (reg == PMBUS_STATUS_VOUT) { + if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT)) + rc |= PB_VOLTAGE_OV_FAULT; + if (mfr & CFFPS_MFR_UV_FAULT) + rc |= PB_VOLTAGE_UV_FAULT; + } else if (reg == PMBUS_STATUS_IOUT) { + if (mfr & CFFPS_MFR_OC_FAULT) + rc |= PB_IOUT_OC_FAULT; + if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING) + rc |= PB_CURRENT_SHARE_FAULT; + } + break; + default: + rc = -ENODATA; + break; + } + + return rc; +} + +static int ibm_cffps_read_word_data(struct i2c_client *client, int page, + int reg) +{ + int rc, mfr; + + switch (reg) { + case PMBUS_STATUS_WORD: + rc = pmbus_read_word_data(client, page, reg); + if (rc < 0) + return rc; + + mfr = pmbus_read_byte_data(client, page, + PMBUS_STATUS_MFR_SPECIFIC); + if (mfr < 0) + /* + * Return the status register instead of an error, + * since we successfully read status. + */ + return rc; + + if (mfr & CFFPS_MFR_PS_KILL) + rc |= PB_STATUS_OFF; + break; + default: + rc = -ENODATA; + break; + } + + return rc; +} + +static struct pmbus_driver_info ibm_cffps_info = { + .pages = 1, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | + PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12, + .read_byte_data = ibm_cffps_read_byte_data, + .read_word_data = ibm_cffps_read_word_data, +}; + +static int ibm_cffps_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &ibm_cffps_info); +} + +static const struct i2c_device_id ibm_cffps_id[] = { + { "ibm_cffps1", 1 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ibm_cffps_id); + +static const struct of_device_id ibm_cffps_of_match[] = { + { .compatible = "ibm,cffps1" }, + {} +}; +MODULE_DEVICE_TABLE(of, ibm_cffps_of_match); + +static struct i2c_driver ibm_cffps_driver = { + .driver = { + .name = "ibm-cffps", + .of_match_table = ibm_cffps_of_match, + }, + .probe = ibm_cffps_probe, + .remove = pmbus_do_remove, + .id_table = ibm_cffps_id, +}; + +module_i2c_driver(ibm_cffps_driver); + +MODULE_AUTHOR("Eddie James"); +MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies"); +MODULE_LICENSE("GPL"); -- 1.8.3.1