Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1753322AbdHRNsN (ORCPT <rfc822;w@1wt.eu>);
        Fri, 18 Aug 2017 09:48:13 -0400
Received: from shadbolt.e.decadent.org.uk ([88.96.1.126]:55355 "EHLO
        shadbolt.e.decadent.org.uk" rhost-flags-OK-OK-OK-OK)
        by vger.kernel.org with ESMTP id S1752706AbdHRNPp (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Fri, 18 Aug 2017 09:15:45 -0400
Content-Type: text/plain; charset="UTF-8"
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
From: Ben Hutchings <ben@decadent.org.uk>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
CC: akpm@linux-foundation.org,
        "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
        "Johan Hovold" <johan@kernel.org>, "Felipe Balbi" <balbi@kernel.org>,
        "Santosh Shilimkar" <santosh.shilimkar@ti.com>,
        "Tony Lindgren" <tony@atomide.com>
Date: Fri, 18 Aug 2017 14:13:20 +0100
Message-ID: <lsq.1503062000.449305936@decadent.org.uk>
X-Mailer: LinuxStableQueue (scripts by bwh)
Subject: [PATCH 3.16 041/134] serial: omap: fix runtime-pm handling on unbind
In-Reply-To: <lsq.1503061998.818387115@decadent.org.uk>
X-SA-Exim-Connect-IP: 82.70.136.246
X-SA-Exim-Mail-From: ben@decadent.org.uk
X-SA-Exim-Scanned: No (on shadbolt.decadent.org.uk); SAEximRunCond expanded to false
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 2646
Lines: 65

3.16.47-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 099bd73dc17ed77aa8c98323e043613b6e8f54fc upstream.

An unbalanced and misplaced synchronous put was used to suspend the
device on driver unbind, something which with a likewise misplaced
pm_runtime_disable leads to external aborts when an open port is being
removed.

Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010
...
[<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60)
[<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138)
[<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190)
[<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c)
[<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20)
[<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260)
[<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60)
[<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c)

Fix this up by resuming the device before deregistering the port and by
suspending and disabling runtime pm only after the port has been
removed.

Also make sure to disable autosuspend before disabling runtime pm so
that the usage count is balanced and device actually suspended before
returning.

Note that due to a negative autosuspend delay being set in probe, the
unbalanced put would actually suspend the device on first driver unbind,
while rebinding and again unbinding would result in a negative
power.usage_count.

Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove")
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/tty/serial/omap-serial.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1754,9 +1754,13 @@ static int serial_omap_remove(struct pla
 {
 	struct uart_omap_port *up = platform_get_drvdata(dev);
 
+	pm_runtime_get_sync(up->dev);
+
+	uart_remove_one_port(&serial_omap_reg, &up->port);
+
+	pm_runtime_dont_use_autosuspend(up->dev);
 	pm_runtime_put_sync(up->dev);
 	pm_runtime_disable(up->dev);
-	uart_remove_one_port(&serial_omap_reg, &up->port);
 	pm_qos_remove_request(&up->pm_qos_request);
 	device_init_wakeup(&dev->dev, false);