Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751003AbdHSSDr (ORCPT ); Sat, 19 Aug 2017 14:03:47 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:22087 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751951AbdHSSDn (ORCPT ); Sat, 19 Aug 2017 14:03:43 -0400 From: To: , , , , , , , , , , , , , , CC: , , , , , Sean Wang Subject: [PATCH v2 2/2] serial: 8250: of: Add new port type for MediaTek BTIF controller on MT7622/23 SoC Date: Sun, 20 Aug 2017 02:03:30 +0800 Message-ID: X-Mailer: git-send-email 1.7.9.5 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2470 Lines: 67 From: Sean Wang MediaTek BTIF controller is the serial interface similar to UART but it works only as the digital device which is mainly used to communicate with the connectivity module called CONNSYS inside the SoC which could be mostly found on those MediaTek SoCs with Bluetooth feature such as MT7622 and MT7623 SoCs. And the controller is made as being compatible with the 8250 register layout with extra registers such as DMA enablement so it tends to be integrated with reusing 8250 OF driver. However, DMA mode is not being supported yet in the current driver. Signed-off-by: Sean Wang Suggested-by: Andy Shevchenko --- drivers/tty/serial/8250/8250_of.c | 2 ++ drivers/tty/serial/8250/8250_port.c | 8 ++++++++ include/uapi/linux/serial_core.h | 3 +++ 3 files changed, 13 insertions(+) diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 6c5a8ca..47d4772 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -300,6 +300,8 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_ALTR_16550_F64, }, { .compatible = "altr,16550-FIFO128", .data = (void *)PORT_ALTR_16550_F128, }, + { .compatible = "mediatek,mt7623-btif", + .data = (void *)PORT_MTK_BTIF, }, { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 25aae66..053bb38 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -289,6 +289,14 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [PORT_MTK_BTIF] = { + .name = "MediaTek BTIF", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 38bea32..cfc07a5 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -272,4 +272,7 @@ /* MPS2 UART */ #define PORT_MPS2UART 116 +/* MediaTek BTIF */ +#define PORT_MTK_BTIF 117 + #endif /* _UAPILINUX_SERIAL_CORE_H */ -- 2.7.4