Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754009AbdHUNkD (ORCPT ); Mon, 21 Aug 2017 09:40:03 -0400 Received: from hs01.dk-develop.de ([213.136.71.231]:59234 "EHLO hs01.dk-develop.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753502AbdHUNkB (ORCPT ); Mon, 21 Aug 2017 09:40:01 -0400 From: Danilo Krummrich To: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, dmitry.torokhov@gmail.com, linus.walleij@linaro.org, rdunlap@infradead.org, devicetree@vger.kernel.org Cc: Danilo Krummrich Subject: [PATCH v8 2/2] dt-bindings: new binding for ps/2 gpio devices Date: Mon, 21 Aug 2017 15:31:12 +0200 Message-Id: <20170821133112.22276-3-danilokrummrich@dk-develop.de> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20170821133112.22276-1-danilokrummrich@dk-develop.de> References: <20170821133112.22276-1-danilokrummrich@dk-develop.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1454 Lines: 44 The PS/2 gpio device binding defines the gpio pins (data and clock) as well as the interrupt which should be used to drive the ps/2 bus. It is expected to get an interrupt on the falling edge of the clock line. Also it can be configured whether the host should support writing to the device. Signed-off-by: Danilo Krummrich --- .../devicetree/bindings/serio/ps2-gpio.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/serio/ps2-gpio.txt diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt new file mode 100644 index 000000000000..83e05ea05883 --- /dev/null +++ b/Documentation/devicetree/bindings/serio/ps2-gpio.txt @@ -0,0 +1,22 @@ +Device-Tree binding for ps/2 gpio device + +Required properties: + - compatible = "ps2-gpio" + - gpios: data and clock gpio + - interrupts: Should trigger on the falling edge of the clock line. + +Optional properties: + - write-enable: Indicates whether write function is provided + to serio device. Possibly providing the write fn will not work, because + of the tough timing requirements. + +Example nodes: + +ps2@0 { + compatible = "ps2-gpio"; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + write-enable; +}; -- 2.14.1