Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752307AbdHVSfM (ORCPT ); Tue, 22 Aug 2017 14:35:12 -0400 Received: from mail-qk0-f193.google.com ([209.85.220.193]:34951 "EHLO mail-qk0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752031AbdHVSfK (ORCPT ); Tue, 22 Aug 2017 14:35:10 -0400 Subject: Re: [PATCH v3 3/4] net: stmmac: register parent MDIO node for sun8i-h3-emac To: Corentin Labbe Cc: Chen-Yu Tsai , Andrew Lunn , Maxime Ripard , Rob Herring , Mark Rutland , Russell King , Giuseppe Cavallaro , Alexandre Torgue , devicetree , linux-arm-kernel , linux-kernel , netdev References: <20170819185025.GB13266@Red> <20170819203836.GA21567@lunn.ch> <20170820065757.GA6081@Red> <20170820142545.GB24150@lunn.ch> <20170821132015.GB1703@lunn.ch> <20170821133104.qvrhvwin2rdg4aqo@flea.lan> <20170821142321.GE1703@lunn.ch> <20170822181140.GA11596@Red> From: Florian Fainelli Message-ID: <352ae66b-78a4-e88b-4544-a8edd9390b0c@gmail.com> Date: Tue, 22 Aug 2017 11:35:01 -0700 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.2.1 MIME-Version: 1.0 In-Reply-To: <20170822181140.GA11596@Red> Content-Type: text/plain; charset=utf-8 Content-Language: en-US Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5424 Lines: 131 On 08/22/2017 11:11 AM, Corentin Labbe wrote: > On Tue, Aug 22, 2017 at 09:40:24AM -0700, Florian Fainelli wrote: >> On 08/22/2017 08:39 AM, Chen-Yu Tsai wrote: >>> On Mon, Aug 21, 2017 at 10:23 PM, Andrew Lunn wrote: >>>>> All muxes are mostly always represented the same way afaik, or do you >>>>> want to simply introduce a new compatible / property? >>>> >>>> + mdio-mux { >>>> + compatible = "allwinner,sun8i-h3-mdio-switch"; >>>> + mdio-parent-bus = <&mdio_parent>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + >>>> + internal_mdio: mdio@1 { >>>> reg = <1>; >>>> - clocks = <&ccu CLK_BUS_EPHY>; >>>> - resets = <&ccu RST_BUS_EPHY>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + int_mii_phy: ethernet-phy@1 { >>>> + compatible = "ethernet-phy-ieee802.3-c22"; >>>> + reg = <1>; >>>> + clocks = <&ccu CLK_BUS_EPHY>; >>>> + resets = <&ccu RST_BUS_EPHY>; >>>> + phy-is-integrated; >>>> + }; >>>> + }; >>>> + mdio: mdio@0 { >>>> + reg = <0>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> }; >>>> >>>> Hi Maxim >>>> >>>> Anybody who knows the MDIO-mux code/binding, knows that it is a run >>>> time mux. You swap the mux per MDIO transaction. You can access all >>>> the PHY and switches on the mux'ed MDIO bus. >>>> >>>> However here, it is effectively a boot-time MUX. You cannot change it >>>> on the fly. What happens when somebody has a phandle to a PHY on the >>>> internal and a phandle to a phy on the external? Does the driver at >>>> least return -EINVAL, or -EBUSY? Is there a representation which >>>> eliminates this possibility? >>> >>> There is only one controller. Either you use the internal PHY, which >>> is then directly coupled (no magnetics needed) to the RJ45 port, or >>> you use an external PHY over MII/RMII/RGMII. You could supposedly >>> have both on a board, and let the user choose one. But why bother >>> with the extra complexity and cost? Either you use the internal PHY >>> at 100M, or an external RGMII PHY for gigabit speeds. >> >> I agree, there is no point in over-engineering any of this. I don't >> think there is actually any MDIO mux per-se in that the MDIO clock and >> data lines are muxed, however there has to be some kind of built-in port >> multiplexer that lets you chose between connecting to the internal PHY >> and any external PHY/MAC, but that is not what a "mdio-mux" node represents. >> >>> >>> So I think what you are saying is either impossible or engineering-wise >>> a very stupid design, like using an external MAC with a discrete PHY >>> connected to the internal MAC's MDIO bus, while using the internal MAC >>> with the internal PHY. >>> >>> Now can we please decide on something? We're a week and a half from >>> the 4.13 release. If mdio-mux is wrong, then we could have two mdio >>> nodes (internal-mdio & external-mdio). >> >> I really don't see a need for a mdio-mux in the first place, just have >> one MDIO controller (current state) sub-node which describes the >> built-in STMMAC MDIO controller and declare the internal PHY as a child >> node (along with 'phy-is-integrated'). If a different configuration is >> used, then just put the external PHY as a child node there. >> >> If fixed-link is required, the mdio node becomes unused anyway. >> >> Works for everyone? > > If we put an external PHY with reg=1 as a child of internal MDIO, il will be merged with internal PHY node and get phy-is-integrated. Then have the .dtsi file contain just the mdio node, but no internal or external PHY and push all the internal and external PHY node definition (in its entirety) to the per-board DTS file, does not that work? > > Does two MDIO node "internal-mdio" and "mdio" works for you ? > (We keep "mdio" for external MDIO for reducing the number of patchs) How does that solve the problem and not create a new one where both MDIO nodes end-up being registered? Does that mean you force the writer of the board-level DTS to systematically disable the internal MDIO node when using an external PHY and vice versa? How is that better than not being explicit like I suggested earlier? > > Thanks > Regards > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > index 4b599b5d26f6..d5e7cf0d9454 100644 > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > @@ -417,7 +417,8 @@ > #size-cells = <0>; > status = "disabled"; > > - mdio: mdio { > + /* Only one MDIO is usable at the time */ > + internal_mdio: mdio@1 { > #address-cells = <1>; > #size-cells = <0>; > int_mii_phy: ethernet-phy@1 { > @@ -425,8 +426,13 @@ > reg = <1>; > clocks = <&ccu CLK_BUS_EPHY>; > resets = <&ccu RST_BUS_EPHY>; > + phy-is-integrated; > }; > }; > + mdio: mdio@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > }; > > spi0: spi@01c68000 { > -- Florian