Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265023AbTGBO1y (ORCPT ); Wed, 2 Jul 2003 10:27:54 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265021AbTGBO1x (ORCPT ); Wed, 2 Jul 2003 10:27:53 -0400 Received: from 200-204-171-188.insite.com.br ([200.204.171.188]:58375 "HELO proxy.inteliweb.com.br") by vger.kernel.org with SMTP id S265002AbTGBO1o (ORCPT ); Wed, 2 Jul 2003 10:27:44 -0400 Message-ID: <00d901c340a8$810556c0$3300a8c0@Slepetys> From: "Roberto Slepetys Ferreira" To: Cc: "Slepetys" Subject: Probably 2.4 kernel or AIC7xxx module trouble Date: Wed, 2 Jul 2003 11:44:55 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8639 Lines: 190 Hi linuxers, I am having a strange halt troubles in my linux box after I installed the 2.4.20 kernel that didn't happen when I was running the 2.2 kernel. The system works fine for hours or days, and then it halts. The keybord halts, the remote acess halts, but I still can ping it ! I found some messages in this newsgroup with the same caracteristics, but it was unsolved. The system halts easily if I do a large I/O, like reindexing a database, giving me some messages like: (scsi0:A:1:0): Locking max tag count at 128... I have a Red Hat 9 distribution instaled in a Intel STL2 server board, with 2 Pentium III 933 Mhz and 512 Mb RAM, 2 scsi disks (18 Mb) and 2 IDE disks (40 Mb), running in multiple RAID 1 and RAID 0 configurations. The dmesg gives me the following data about the SCSI: SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs blk: queue c24fd618, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAJ3182MC Rev: 0114 Type: Direct-Access ANSI SCSI revision: 04 blk: queue c24fd418, I/O limit 4095Mb (mask 0xffffffff) Vendor: IBM Model: DDYS-T18350M Rev: SA2A Type: Direct-Access ANSI SCSI revision: 03 blk: queue c24fd218, I/O limit 4095Mb (mask 0xffffffff) Vendor: ESG-SHV Model: SCA HSBP M14 Rev: 0.03 Type: Processor ANSI SCSI revision: 02 blk: queue dfc58e18, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 253 scsi0:A:1:0: Tagged Queuing enabled. Depth 253 Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.26 Type: CD-ROM ANSI SCSI revision: 02 blk: queue dfc58a18, I/O limit 4095Mb (mask 0xffffffff) Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sda: 35694904 512-byte hdwr sectors (18276 MB) sda: sda1 sda2 sda3 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB) sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 Journalled Block Device driver loaded md: Autodetecting RAID arrays. The /proc/scsi/aic7xxx/0 gives me: Adaptec AIC7xxx driver version: 6.2.8 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Serial EEPROM: 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0x58e4 0x5c5e 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0250 0x133f Channel A Target 0 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Curr: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Channel A Target 0 Lun 0 Settings Commands Queued 488876 Commands Active 0 Command Openings 125 Max Tagged Openings 253 Device Queue Frozen Count 0 Channel A Target 1 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Curr: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Channel A Target 1 Lun 0 Settings Commands Queued 465642 Commands Active 0 Command Openings 128 Max Tagged Openings 128 Device Queue Frozen Count 0 Channel A Target 2 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 3 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 4 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 5 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 6 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 3.300MB/s transfers Curr: 3.300MB/s transfers Channel A Target 6 Lun 0 Settings Commands Queued 1 Commands Active 0 Command Openings 1 Max Tagged Openings 0 Device Queue Frozen Count 0 Channel A Target 7 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 8 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 9 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 10 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 11 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 12 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 13 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 14 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 15 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) And /proc/scsi/aic7xxx/1 is: daptec AIC7xxx driver version: 6.2.8 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Serial EEPROM: 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0xc33a 0x58e4 0x5c5e 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0250 0x133f Channel A Target 0 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 1 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 2 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 3 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 4 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 5 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 20.000MB/s transfers (20.000MHz, offset 16) Curr: 20.000MB/s transfers (20.000MHz, offset 16) Channel A Target 5 Lun 0 Settings Commands Queued 193 Commands Active 0 Command Openings 1 Max Tagged Openings 0 Device Queue Frozen Count 0 Channel A Target 6 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 7 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 8 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 9 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 10 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 11 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 12 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 13 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 14 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 15 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) How I could know if this is a hardware problem or a kernel + module problem ? Thanks Slepetys - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/