Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751668AbdH2Imr (ORCPT ); Tue, 29 Aug 2017 04:42:47 -0400 Received: from szxga05-in.huawei.com ([45.249.212.191]:5033 "EHLO szxga05-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751264AbdH2Ilq (ORCPT ); Tue, 29 Aug 2017 04:41:46 -0400 From: Li Wei To: , , , , , , , , , , , , , , , , , , , , CC: , Subject: [PATCH v3 3/5] arm64: dts: add ufs dts node Date: Tue, 29 Aug 2017 16:41:14 +0800 Message-ID: <20170829084116.106695-4-liwei213@huawei.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170829084116.106695-1-liwei213@huawei.com> References: <20170829084116.106695-1-liwei213@huawei.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [100.107.89.192] X-CFilter-Loop: Reflected X-Mirapoint-Virus-RAPID-Raw: score=unknown(0), refid=str=0001.0A090203.59A528BC.0085,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1,fgs=0, ip=0.0.0.0, so=2014-11-16 11:51:01, dmn=2013-03-21 17:37:32 X-Mirapoint-Loop-Id: 586779923c8011933b38cfd856411dd0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1043 Lines: 35 arm64: dts: add ufs node for Hisilicon Signed-off-by: Li Wei --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index c6a1961e8d55..0ae01d7480df 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -848,5 +848,21 @@ &sdio_cfg_func>; status = "disabled"; }; + + ufs: ufs@ff3b0000 { + compatible = "jedec,ufs-1.1", "hisilicon,hi3660-ufs"; + /* 0: HCI standard */ + /* 1: UFS SYS CTRL */ + reg = <0x0 0xff3b0000 0x0 0x1000>, + <0x0 0xff3b1000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; + clock-names = "clk_ref", "clk_phy"; + freq-table-hz = <0 0>, <0 0>; + reset-gpio = <&gpio18 1 0>; + status = "okay"; + }; }; }; -- 2.11.0