Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751613AbdHaTAd (ORCPT ); Thu, 31 Aug 2017 15:00:33 -0400 Received: from anholt.net ([50.246.234.109]:53706 "EHLO anholt.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751109AbdHaTAa (ORCPT ); Thu, 31 Aug 2017 15:00:30 -0400 From: Eric Anholt To: Florian Fainelli Cc: linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Wahren , bcm-kernel-feedback-list@broadcom.com, Ray Jui , Scott Branden , Jon Mason , devicetree@vger.kernel.org, Rob Herring , Mark Rutland , Eric Anholt Subject: [PATCH 2/2] ARM: dts: Add the PWM node to Cygnus Date: Thu, 31 Aug 2017 11:54:16 -0700 Message-Id: <20170831185416.8181-2-eric@anholt.net> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20170831185416.8181-1-eric@anholt.net> References: <20170831185416.8181-1-eric@anholt.net> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 834 Lines: 30 This is connected up to the backlight on 911360_entphn, which we'll need for a panel driver. For now, leave the node disabled in the shared dtsi. Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 74f73ff24aec..b9a654d733ae 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -585,6 +585,14 @@ status = "disabled"; }; + pwm: pwm@180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + keypad: keypad@180ac000 { compatible = "brcm,bcm-keypad"; reg = <0x180ac000 0x14c>; -- 2.14.1