Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751512AbdHaTAb (ORCPT ); Thu, 31 Aug 2017 15:00:31 -0400 Received: from anholt.net ([50.246.234.109]:53692 "EHLO anholt.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750955AbdHaTAa (ORCPT ); Thu, 31 Aug 2017 15:00:30 -0400 From: Eric Anholt To: Florian Fainelli Cc: linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Wahren , bcm-kernel-feedback-list@broadcom.com, Ray Jui , Scott Branden , Jon Mason , devicetree@vger.kernel.org, Rob Herring , Mark Rutland , Eric Anholt Subject: [PATCH 1/2] ARM: dts: Add the CLCD controller to Cygnus. Date: Thu, 31 Aug 2017 11:54:15 -0700 Message-Id: <20170831185416.8181-1-eric@anholt.net> X-Mailer: git-send-email 2.14.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1187 Lines: 37 This doesn't yet enable it on any particular platform, as we still need a panel driver for bcm911360_entphn. Signed-off-by: Eric Anholt --- These bits are just carving off a little bit of my 911360_entphn panel series, to reduce conflicts when rebasing (which I just did for testing pl111 changes for cygnus regressions). I'm waiting to get my current RPi panel driver in before working on the 911360 panel again. arch/arm/boot/dts/bcm-cygnus.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 7c957ea06c66..74f73ff24aec 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -575,6 +575,16 @@ status = "disabled"; }; + clcd: clcd@180a0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x180a0000 0x1000>; + interrupts = ; + interrupt-names = "combined"; + clocks = <&axi41_clk>, <&apb_clk>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + keypad: keypad@180ac000 { compatible = "brcm,bcm-keypad"; reg = <0x180ac000 0x14c>; -- 2.14.1