Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S266422AbTGEVxO (ORCPT ); Sat, 5 Jul 2003 17:53:14 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266509AbTGEVxO (ORCPT ); Sat, 5 Jul 2003 17:53:14 -0400 Received: from mail.gmx.net ([213.165.64.20]:50584 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S266422AbTGEVxH (ORCPT ); Sat, 5 Jul 2003 17:53:07 -0400 Message-ID: <3F074C25.5060004@gmx.at> Date: Sun, 06 Jul 2003 00:07:33 +0200 From: Wilfried Weissmann User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.0) Gecko/20020623 Debian/1.0.0-0.woody.1 MIME-Version: 1.0 To: Wil Reichert , Kernel Mailing List Subject: Re: highpoint driver problem, 2.4.21-ac4 References: <4V9E.47E.39@gated-at.bofh.it> <4V9E.47E.37@gated-at.bofh.it> <4WyE.5oC.19@gated-at.bofh.it> <3F04823A.5030403@gmx.at> <20030703184427.3cb71051.wilreichert@yahoo.com> Content-Type: multipart/mixed; boundary="------------070100040408000202030001" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2703 Lines: 73 This is a multi-part message in MIME format. --------------070100040408000202030001 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Wil Reichert wrote: > Thats the kernel I'm using. could you try the attachted patch, and report if this changes something? bye, wilfried > > Wil > > On Thu, 03 Jul 2003 21:21:30 +0200 > Wilfried Weissmann wrote: > > >>Wil Reichert wrote: >> >>> The on-board Highpoint controller (HPT372A) on my DFI NF2 is >> >>> having issue. Loading the hptraid module results in a 'No such >> >>> device' message while the hpt366 module segfaults and leaves an >> >>> oops in my logs. These errors occur regardless of the disk/raid >> >>> configuration in the hpt BIOS. Following are the oops trace, an >> >>> lsmod, the .config and a lspci -vvv. >> >> >> >> The crash occurs in the hpt366 module. Loading hptraid will not >> >> work because it depends on the kernel to claim the disks of the >> >> raid volume (that is what hpt366 would do). I will add autoloading >> >> of the ide-controller module in the next raid-driver release. >> >> However, I do not know why the kernel oopses. You might want to try >> >> to build the hpt366 code into the kernel instead of a module. If it >> >> works it would probably mean that "ide_hwif_t *hwif" was not >> >> properly initalized. >> > >> > I initially had all the hpt modules built into the kernel, but that >> > would also produce an oops and die immediately after ID'ing the two >> > drives I have on attached. Would any more information be of use to >> > you? >> >>2.4.21-ac4 contains several fixes for the hpt37x. Please try this patch out. >> >>bye, >>Wilfried --------------070100040408000202030001 Content-Type: text/plain; name="linux-2.4.21-ac4-idedmafix.patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="linux-2.4.21-ac4-idedmafix.patch" --- linux/drivers/ide/setup-pci.c.orig 2003-07-06 00:04:06.000000000 +0200 +++ linux/drivers/ide/setup-pci.c 2003-07-06 00:04:12.000000000 +0200 @@ -172,7 +172,7 @@ static int ide_setup_pci_baseregs (struc * is already in DMA mode we check and enforce IDE simplex rules. */ -static unsigned long __init ide_get_or_set_dma_base (ide_hwif_t *hwif) +static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif) { unsigned long dma_base = 0; struct pci_dev *dev = hwif->pci_dev; --------------070100040408000202030001-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/