Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752201AbdIAQam (ORCPT ); Fri, 1 Sep 2017 12:30:42 -0400 Received: from mail-wr0-f194.google.com ([209.85.128.194]:34534 "EHLO mail-wr0-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752078AbdIAQaj (ORCPT ); Fri, 1 Sep 2017 12:30:39 -0400 X-Google-Smtp-Source: ADKCNb7/4SvY4l7nlZteZJxH0wgjFg1Q3/qQJLASYvbwxuFRmNnkX0UFc4wUFAQ8qj5QSPr45gs0xg== From: Philipp Rossak X-Google-Original-From: Philipp Rossak < embed3d@gmail.com > To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, maxime.ripard@free-electrons.com, wens@csie.org Cc: Philipp Rossak , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH v2 2/2] ARM: dts: sun8i: h3: Improved Wifi bindings on Bananapi M2 Plus Date: Fri, 1 Sep 2017 18:30:01 +0200 Message-Id: <1504283401-4263-3-git-send-email-embed3d@gmail.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1504283401-4263-1-git-send-email-embed3d@gmail.com> References: <1504283401-4263-1-git-send-email-embed3d@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1145 Lines: 44 From: Philipp Rossak * vqmmc is in this case not needed * no need for pincontrol nodes when the pin is set to a GPIO Signed-off-by: Philipp Rossak --- arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index d756ff8..f7e5d8a 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -98,7 +98,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_en_bpi_m2p>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; @@ -153,7 +152,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; @@ -200,11 +198,6 @@ pins = "PL3"; function = "gpio_in"; }; - - wifi_en_bpi_m2p: wifi_en_pin { - pins = "PL7"; - function = "gpio_out"; - }; }; ®_usb0_vbus { -- 2.7.4