Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753102AbdIEUe0 (ORCPT ); Tue, 5 Sep 2017 16:34:26 -0400 Received: from mail-wr0-f195.google.com ([209.85.128.195]:34529 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752653AbdIEUeW (ORCPT ); Tue, 5 Sep 2017 16:34:22 -0400 X-Google-Smtp-Source: ADKCNb6hG2Fg2RYXdKWNzBKw60uEAcKhNxlD1JX6t8OSidr9yuOUJn9MsSkLkTu2LpgD1iovgXzdyw== From: Philipp Rossak X-Google-Original-From: Philipp Rossak < embed3d@gmail.com > To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, maxime.ripard@free-electrons.com, wens@csie.org Cc: Philipp Rossak , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH v2] ARM: dts: sun8i: h3: Fix Pincrtl bindings on Bananapi M2 Plus Date: Tue, 5 Sep 2017 22:34:16 +0200 Message-Id: <1504643656-4926-1-git-send-email-embed3d@gmail.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1688 Lines: 71 From: Philipp Rossak There is no need for pincontrol nodes when the pin is set to a GPIO Signed-off-by: Philipp Rossak --- This is Patch is a new version of the following patch: https://patchwork.kernel.org/patch/9934835/ changes since version 1: * vqmmc-supply was added again * The pincontrolers for the leds and gpio_keys were removed arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index d756ff8..cc20d67 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -64,7 +64,6 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -76,7 +75,6 @@ gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { label = "power"; @@ -98,7 +96,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_en_bpi_m2p>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; @@ -190,23 +187,6 @@ status = "okay"; }; -&r_pio { - pwr_led_bpi_m2p: led_pins@0 { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_bpi_m2p: key_pins@0 { - pins = "PL3"; - function = "gpio_in"; - }; - - wifi_en_bpi_m2p: wifi_en_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ status = "okay"; -- 2.7.4