Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756627AbdIHPgk (ORCPT ); Fri, 8 Sep 2017 11:36:40 -0400 Received: from mail-wr0-f194.google.com ([209.85.128.194]:35317 "EHLO mail-wr0-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932217AbdIHPga (ORCPT ); Fri, 8 Sep 2017 11:36:30 -0400 X-Google-Smtp-Source: ADKCNb7h6mmGG+LclTSLdoGtlEcr/ag/nvgWL/WEteUruwWBbuJoERN9oSXBzzmou6krUjyx1tllDw== From: Romain Izard To: Nicolas Ferre , Boris Brezillon , Michael Turquette , Stephen Boyd , Ludovic Desroches , Jonathan Cameron , Wenyou Yang , Josh Wu , David Woodhouse , Brian Norris , Marek Vasut , Cyrille Pitchen , Thierry Reding , Richard Genoud , Greg Kroah-Hartman , Alan Stern Cc: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-serial@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Romain Izard Subject: [PATCH v1 09/10] atmel_flexcom: Support backup mode Date: Fri, 8 Sep 2017 17:36:03 +0200 Message-Id: <20170908153604.28383-10-romain.izard.pro@gmail.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170908153604.28383-1-romain.izard.pro@gmail.com> References: <20170908153604.28383-1-romain.izard.pro@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3316 Lines: 121 The controller used by a flexcom module is configured at boot, and left alone after this. As the configuration will be lost after backup mode, restore the state of the flexcom driver on resume. Signed-off-by: Romain Izard --- drivers/mfd/atmel-flexcom.c | 65 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 50 insertions(+), 15 deletions(-) diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c index 064bde9cff5a..ef1235c4a179 100644 --- a/drivers/mfd/atmel-flexcom.c +++ b/drivers/mfd/atmel-flexcom.c @@ -39,34 +39,44 @@ #define FLEX_MR_OPMODE(opmode) (((opmode) << FLEX_MR_OPMODE_OFFSET) & \ FLEX_MR_OPMODE_MASK) +struct atmel_flexcom { + void __iomem *base; + u32 opmode; + struct clk *clk; +}; static int atmel_flexcom_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct clk *clk; struct resource *res; - void __iomem *base; - u32 opmode; + struct atmel_flexcom *afc; int err; + u32 val; + + afc = devm_kzalloc(&pdev->dev, sizeof(*afc), GFP_KERNEL); + if (!afc) + return -ENOMEM; - err = of_property_read_u32(np, "atmel,flexcom-mode", &opmode); + platform_set_drvdata(pdev, afc); + + err = of_property_read_u32(np, "atmel,flexcom-mode", &afc->opmode); if (err) return err; - if (opmode < ATMEL_FLEXCOM_MODE_USART || - opmode > ATMEL_FLEXCOM_MODE_TWI) + if (afc->opmode < ATMEL_FLEXCOM_MODE_USART || + afc->opmode > ATMEL_FLEXCOM_MODE_TWI) return -EINVAL; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); + afc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(afc->base)) + return PTR_ERR(afc->base); - clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) - return PTR_ERR(clk); + afc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(afc->clk)) + return PTR_ERR(afc->clk); - err = clk_prepare_enable(clk); + err = clk_prepare_enable(afc->clk); if (err) return err; @@ -76,9 +86,10 @@ static int atmel_flexcom_probe(struct platform_device *pdev) * inaccessible and are read as zero. Also the external I/O lines of the * Flexcom are muxed to reach the selected device. */ - writel(FLEX_MR_OPMODE(opmode), base + FLEX_MR); + val = FLEX_MR_OPMODE(afc->opmode); + writel(val, afc->base + FLEX_MR); - clk_disable_unprepare(clk); + clk_disable_unprepare(afc->clk); return devm_of_platform_populate(&pdev->dev); } @@ -89,10 +100,34 @@ static const struct of_device_id atmel_flexcom_of_match[] = { }; MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match); +#ifdef CONFIG_PM_SLEEP +static int atmel_flexcom_resume(struct device *dev) +{ + struct atmel_flexcom *afc = dev_get_drvdata(dev); + int err; + u32 val; + + err = clk_prepare_enable(afc->clk); + if (err) + return err; + + val = FLEX_MR_OPMODE(afc->opmode), + writel(val, afc->base + FLEX_MR); + + clk_disable_unprepare(afc->clk); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL, + atmel_flexcom_resume); + static struct platform_driver atmel_flexcom_driver = { .probe = atmel_flexcom_probe, .driver = { .name = "atmel_flexcom", + .pm = &atmel_flexcom_pm_ops, .of_match_table = atmel_flexcom_of_match, }, }; -- 2.11.0