Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751529AbdIQIeJ (ORCPT ); Sun, 17 Sep 2017 04:34:09 -0400 Received: from smx-7fb.smtp.startmail.com ([37.153.204.247]:34623 "EHLO smx-7fb.smtp.startmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751282AbdIQIeE (ORCPT ); Sun, 17 Sep 2017 04:34:04 -0400 From: "Marty E. Plummer" To: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, xuejiancheng@hisilicon.com, leo.yan@linaro.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, mark.rutland@arm.com, mturquette@baylibre.com, wenpan@hisilicon.com, robh+dt@kernel.org, linux@armlinux.org.uk, sboyd@codeaurora.org, xuwei5@hisilicon.com, zhangfei.gao@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, "Marty E. Plummer" Subject: [RFC RESEND 3/3] arm: dts: add Hi3521A dts Date: Sun, 17 Sep 2017 03:23:27 -0500 Message-Id: <20170917082327.10058-4-hanetzer@startmail.com> In-Reply-To: <20170917082327.10058-1-hanetzer@startmail.com> References: <20170917082327.10058-1-hanetzer@startmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10971 Lines: 401 Add hi3521a.dtsi and hi3521a-rs-dm290e.dts for RaySharp CCTV systems, marketed under the name Samsung SDR-B74301N Signed-off-by: Marty E. Plummer --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/hi3521a-rs-dm290e.dts | 52 ++++++ arch/arm/boot/dts/hi3521a.dtsi | 310 ++++++++++++++++++++++++++++++++ 3 files changed, 364 insertions(+) create mode 100644 arch/arm/boot/dts/hi3521a-rs-dm290e.dts create mode 100644 arch/arm/boot/dts/hi3521a.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faf46abaa4a2..e7b9b5dde20f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -189,6 +189,8 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-sq201.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb +dtb-$(CONFIG_ARCH_HI3521A) += \ + hi3521a-rs-dm290e.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += \ diff --git a/arch/arm/boot/dts/hi3521a-rs-dm290e.dts b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts new file mode 100644 index 000000000000..b32c8392c93f --- /dev/null +++ b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2017 Marty Plummer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/dts-v1/; +#include "hi3521a.dtsi" + +/ { + model = "RaySharp RS-DM-290E DVR Board"; + compatible = "hisilicon,hi3521a"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0xf00000>; + }; +}; + +&hi_sfc { + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&dual_timer0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hi3521a.dtsi b/arch/arm/boot/dts/hi3521a.dtsi new file mode 100644 index 000000000000..2af746fdec46 --- /dev/null +++ b/arch/arm/boot/dts/hi3521a.dtsi @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2017 Marty Plummer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + }; + }; + + hi_sfc: spi-nor-controller@10000000 { + compatible = "hisilicon,hi3521a-spi-nor", "hisilicon,fmc-spi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000000 0x10000>, <0x14000000 0x1000000>; + reg-names = "control", "memory"; + clocks = <&crg HI3521A_FMC_CLK>; + status = "disabled"; + }; + + gic: interrupt-controller@10300000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10301000 0x1000>, <0x10302000 0x1000>; + }; + + clk_3m: clk_3m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + + crg: clock-reset-controller@12040000 { + compatible = "hisilicon,hi3521a-crg"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x12040000 0x10000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + dmac: dma@10060000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10060000 0x1000>; + interrupts = ; + status = "disabled"; + }; + + dual_timer0: timer@12000000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = , + ; + reg = <0x12000000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer1: timer@12010000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = , + ; + reg = <0x12010000 0x1000>; + clocks = <&clk_3m>; + clock-name = "apb_pclk"; + status = "disabled"; + }; + + dual_timer2: timer@12020000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = , + ; + reg = <0x12020000 0x1000>; + clocks = <&clk_3m>; + clock-name = "apb_pclk"; + status = "disabled"; + }; + + dual_timer3: timer@12030000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = , + ; + reg = <0x12030000 0x1000>; + clocks = <&clk_3m>; + clock-name = "apb_pclk"; + status = "disabled"; + }; + + wdt0: watchdog@12070000 { + compatible = "arm,sp805", "arm,primecell"; + arm,primecell-periphid = <0x00141805>; + reg = <0x12070000 0x1000>; + interrupts = ; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + }; + + uart0: serial@12080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12080000 0x1000>; + interrupts = ; + clocks = <&crg HI3521A_UART0_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: serial@12090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12090000 0x1000>; + interrupts = ; + clocks = <&crg HI3521A_UART1_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@120a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x120a0000 0x1000>; + interrupts = ; + clocks = <&crg HI3521A_UART2_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio0: gpio@12150000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12150000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@12160000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12160000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@12170000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12170000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio3: gpio@12180000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12180000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio4: gpio@12190000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12190000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio5: gpio@121a0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121a0000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio6: gpio@121b0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121b0000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio7: gpio@121c0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121c0000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio8: gpio@121d0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121d0000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio9: gpio@121e0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121e0000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio10: gpio@121f0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x121f0000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio11: gpio@12200000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12200000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio12: gpio@12210000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12210000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio13: gpio@12220000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x12220000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; +}; -- 2.14.1