Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752326AbdIRGrz (ORCPT ); Mon, 18 Sep 2017 02:47:55 -0400 Received: from eusmtp01.atmel.com ([212.144.249.243]:59615 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752244AbdIRGry (ORCPT ); Mon, 18 Sep 2017 02:47:54 -0400 From: Wenyou Yang To: Jonathan Corbet CC: Nicolas Ferre , , Sakari Ailus , , Linux Media Mailing List , Mauro Carvalho Chehab , Wenyou Yang Subject: [PATCH v4 3/3] media: ov7670: Add the s_power operation Date: Mon, 18 Sep 2017 14:45:14 +0800 Message-ID: <20170918064514.6841-4-wenyou.yang@microchip.com> X-Mailer: git-send-email 2.13.0 In-Reply-To: <20170918064514.6841-1-wenyou.yang@microchip.com> References: <20170918064514.6841-1-wenyou.yang@microchip.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2752 Lines: 101 Add the s_power operation which is responsible for manipulating the power dowm mode through the PWDN pin and the reset operation through the RESET pin. Signed-off-by: Wenyou Yang --- Changes in v4: None Changes in v3: None Changes in v2: - Add the patch to support the get_fmt ops. - Remove the redundant invoking ov7670_init_gpio(). drivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c index 456f48057605..304abc769a67 100644 --- a/drivers/media/i2c/ov7670.c +++ b/drivers/media/i2c/ov7670.c @@ -1542,6 +1542,22 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis } #endif +static int ov7670_s_power(struct v4l2_subdev *sd, int on) +{ + struct ov7670_info *info = to_state(sd); + + if (info->pwdn_gpio) + gpiod_direction_output(info->pwdn_gpio, !on); + if (on && info->resetb_gpio) { + gpiod_set_value(info->resetb_gpio, 1); + usleep_range(500, 1000); + gpiod_set_value(info->resetb_gpio, 0); + usleep_range(3000, 5000); + } + + return 0; +} + static void ov7670_get_default_format(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *format) { @@ -1575,6 +1591,7 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = { .g_register = ov7670_g_register, .s_register = ov7670_s_register, #endif + .s_power = ov7670_s_power, }; static const struct v4l2_subdev_video_ops ov7670_video_ops = { @@ -1692,23 +1709,25 @@ static int ov7670_probe(struct i2c_client *client, if (ret) return ret; - ret = ov7670_init_gpio(client, info); - if (ret) - goto clk_disable; - info->clock_speed = clk_get_rate(info->clk) / 1000000; if (info->clock_speed < 10 || info->clock_speed > 48) { ret = -EINVAL; goto clk_disable; } + ret = ov7670_init_gpio(client, info); + if (ret) + goto clk_disable; + + ov7670_s_power(sd, 1); + /* Make sure it's an ov7670 */ ret = ov7670_detect(sd); if (ret) { v4l_dbg(1, debug, client, "chip found @ 0x%x (%s) is not an ov7670 chip.\n", client->addr << 1, client->adapter->name); - goto clk_disable; + goto power_off; } v4l_info(client, "chip found @ 0x%02x (%s)\n", client->addr << 1, client->adapter->name); @@ -1787,6 +1806,8 @@ static int ov7670_probe(struct i2c_client *client, #endif hdl_free: v4l2_ctrl_handler_free(&info->hdl); +power_off: + ov7670_s_power(sd, 0); clk_disable: clk_disable_unprepare(info->clk); return ret; @@ -1804,6 +1825,7 @@ static int ov7670_remove(struct i2c_client *client) #if defined(CONFIG_MEDIA_CONTROLLER) media_entity_cleanup(&info->sd.entity); #endif + ov7670_s_power(sd, 0); return 0; } -- 2.13.0