Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751915AbdIVJJJ (ORCPT ); Fri, 22 Sep 2017 05:09:09 -0400 Received: from out20-110.mail.aliyun.com ([115.124.20.110]:52214 "EHLO out20-110.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751800AbdIVJJH (ORCPT ); Fri, 22 Sep 2017 05:09:07 -0400 X-Alimail-AntiSpam: AC=CONTINUE;BC=0.0744518|-1;FP=0|0|0|0|0|-1|-1|-1;HT=e02c03293;MF=yong.deng@magewell.com;NM=1;PH=DS;RN=25;RT=25;SR=0;TI=SMTPD_---.8yFv6zo_1506071310; Date: Fri, 22 Sep 2017 17:08:29 +0800 From: Yong To: Mylene JOSSERAND Cc: maxime.ripard@free-electrons.com, Mauro Carvalho Chehab , Rob Herring , Mark Rutland , Chen-Yu Tsai , Greg Kroah-Hartman , "David S. Miller" , Hans Verkuil , Arnd Bergmann , Hugues Fruchet , Yannick Fertre , Philipp Zabel , Benoit Parrot , Benjamin Gaignard , Jean-Christophe Trotin , Ramesh Shanmugasundaram , Minghsiu Tsai , Krzysztof Kozlowski , Robert Jarzmik , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: Re: [PATCH v2 1/3] media: V3s: Add support for Allwinner CSI. Message-Id: <20170922170829.33e3813f9504e90cffeca66e@magewell.com> In-Reply-To: <20170922104413.5d7d64e7@dell-desktop.home> References: <1501131697-1359-1-git-send-email-yong.deng@magewell.com> <1501131697-1359-2-git-send-email-yong.deng@magewell.com> <20170922104413.5d7d64e7@dell-desktop.home> X-Mailer: Sylpheed 3.6.0 (GTK+ 2.24.30; i686-pc-mingw32) Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8823 Lines: 261 Hello Mylène, On Fri, 22 Sep 2017 10:44:13 +0200 Mylene JOSSERAND wrote: > Hello Yong, > > Thank you for these drivers! > > I tested it with an OV5640 camera on an Nanopi M1 plus (Allwinner H3) > and I noticed that I got a frame correctly displayed only on a half of > the frame's size. > > It is related to your "sun6i_csi_set_window" function (see > below). > > > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface > > and CSI1 is used for parallel interface. This is not documented in > > datasheet but by testing and guess. > > > > This patch implement a v4l2 framework driver for it. > > > > Currently, the driver only support the parallel interface. MIPI-CSI2, > > ISP's support are not included in this patch. > > > > Signed-off-by: Yong Deng > > --- > > drivers/media/platform/Kconfig | 1 + > > drivers/media/platform/Makefile | 2 + > > drivers/media/platform/sun6i-csi/Kconfig | 9 + > > drivers/media/platform/sun6i-csi/Makefile | 3 + > > drivers/media/platform/sun6i-csi/sun6i_csi.c | 545 > > +++++++++++++++ drivers/media/platform/sun6i-csi/sun6i_csi.h | > > 203 ++++++ drivers/media/platform/sun6i-csi/sun6i_csi_v3s.c | 827 > > +++++++++++++++++++++++ > > drivers/media/platform/sun6i-csi/sun6i_csi_v3s.h | 206 ++++++ > > drivers/media/platform/sun6i-csi/sun6i_video.c | 663 > > ++++++++++++++++++ drivers/media/platform/sun6i-csi/sun6i_video.h > > | 61 ++ 10 files changed, 2520 insertions(+) create mode 100644 > > drivers/media/platform/sun6i-csi/Kconfig create mode 100644 > > drivers/media/platform/sun6i-csi/Makefile create mode 100644 > > drivers/media/platform/sun6i-csi/sun6i_csi.c create mode 100644 > > drivers/media/platform/sun6i-csi/sun6i_csi.h create mode 100644 > > drivers/media/platform/sun6i-csi/sun6i_csi_v3s.c create mode 100644 > > drivers/media/platform/sun6i-csi/sun6i_csi_v3s.h create mode 100644 > > drivers/media/platform/sun6i-csi/sun6i_video.c create mode 100644 > > drivers/media/platform/sun6i-csi/sun6i_video.h > > > > diff --git a/drivers/media/platform/Kconfig > > b/drivers/media/platform/Kconfig index 0c741d1..8371a87 100644 > > --- a/drivers/media/platform/Kconfig > > +++ b/drivers/media/platform/Kconfig > > @@ -143,6 +143,7 @@ source "drivers/media/platform/am437x/Kconfig" > > source "drivers/media/platform/xilinx/Kconfig" > > source "drivers/media/platform/rcar-vin/Kconfig" > > source "drivers/media/platform/atmel/Kconfig" > > +source "drivers/media/platform/sun6i-csi/Kconfig" > > > > > > > +static void sun6i_csi_set_format(struct sun6i_csi_dev *sdev) > > +{ > > + struct sun6i_csi *csi = &sdev->csi; > > + u32 cfg; > > + u32 val; > > + > > + regmap_read(sdev->regmap, CSI_CH_CFG_REG, &cfg); > > + > > + cfg &= ~(CSI_CH_CFG_INPUT_FMT_MASK | > > + CSI_CH_CFG_OUTPUT_FMT_MASK | CSI_CH_CFG_VFLIP_EN | > > + CSI_CH_CFG_HFLIP_EN | CSI_CH_CFG_FIELD_SEL_MASK | > > + CSI_CH_CFG_INPUT_SEQ_MASK); > > + > > + val = get_csi_input_format(csi->config.code, > > csi->config.pixelformat); > > + cfg |= CSI_CH_CFG_INPUT_FMT(val); > > + > > + val = get_csi_output_format(csi->config.code, > > csi->config.field); > > + cfg |= CSI_CH_CFG_OUTPUT_FMT(val); > > + > > + val = get_csi_input_seq(csi->config.code, > > csi->config.pixelformat); > > + cfg |= CSI_CH_CFG_INPUT_SEQ(val); > > + > > + if (csi->config.field == V4L2_FIELD_TOP) > > + cfg |= CSI_CH_CFG_FIELD_SEL_FIELD0; > > + else if (csi->config.field == V4L2_FIELD_BOTTOM) > > + cfg |= CSI_CH_CFG_FIELD_SEL_FIELD1; > > + else > > + cfg |= CSI_CH_CFG_FIELD_SEL_BOTH; > > + > > + regmap_write(sdev->regmap, CSI_CH_CFG_REG, cfg); > > +} > > + > > +static void sun6i_csi_set_window(struct sun6i_csi_dev *sdev) > > +{ > > + struct sun6i_csi_config *config = &sdev->csi.config; > > + u32 bytesperline_y; > > + u32 bytesperline_c; > > + int *planar_offset = sdev->planar_offset; > > + > > + regmap_write(sdev->regmap, CSI_CH_HSIZE_REG, > > + CSI_CH_HSIZE_HOR_LEN(config->width) | > > + CSI_CH_HSIZE_HOR_START(0)); > > + regmap_write(sdev->regmap, CSI_CH_VSIZE_REG, > > + CSI_CH_VSIZE_VER_LEN(config->height) | > > + CSI_CH_VSIZE_VER_START(0)); > > In my case, the HOR_LEN and VER_LEN were not correctly configured. > > They were configured to width and height (640 * 480) but as I was > using a YUYV format, the pixel's size is 2 bytes so the > horizontal/vertical lines' lengths were divided by 2. > > Currently, I fixed that by getting the number of bytes per pixel with > "v4l2_pixformat_get_bpp()": > > + int bytes_pixel; > + > + bytes_pixel = v4l2_pixformat_get_bpp(config->pixelformat) / 8; > > regmap_write(sdev->regmap, CSI_CH_HSIZE_REG, > - CSI_CH_HSIZE_HOR_LEN(config->width) | > + CSI_CH_HSIZE_HOR_LEN(config->width * bytes_pixel) | > CSI_CH_HSIZE_HOR_START(0)); > regmap_write(sdev->regmap, CSI_CH_VSIZE_REG, > - CSI_CH_VSIZE_VER_LEN(config->height) | > + CSI_CH_VSIZE_VER_LEN(config->height * bytes_pixel) > | CSI_CH_VSIZE_VER_START(0)); > > There is certainly a nicer way to handle that. The datasheet documents CSI_CH_HSIZE_HOR_LEN and CSI_CH_VSIZE_VER_LEN's unit is pixel. And I had tested the YUYV format on V3s and that's OK. Another register CSI_CH_BUF_LEN_REG's unit is byte. > > > + > > + planar_offset[0] = 0; > > + switch(config->pixelformat) { > > + case V4L2_PIX_FMT_HM12: > > + case V4L2_PIX_FMT_NV12: > > + case V4L2_PIX_FMT_NV21: > > + case V4L2_PIX_FMT_NV16: > > + case V4L2_PIX_FMT_NV61: > > + bytesperline_y = config->width; > > + bytesperline_c = config->width; > > + planar_offset[1] = bytesperline_y * config->height; > > + planar_offset[2] = -1; > > + break; > > + case V4L2_PIX_FMT_YUV420: > > + case V4L2_PIX_FMT_YVU420: > > + bytesperline_y = config->width; > > + bytesperline_c = config->width / 2; > > + planar_offset[1] = bytesperline_y * config->height; > > + planar_offset[2] = planar_offset[1] + > > + bytesperline_c * config->height / 2; > > + break; > > + case V4L2_PIX_FMT_YUV422P: > > + bytesperline_y = config->width; > > + bytesperline_c = config->width / 2; > > + planar_offset[1] = bytesperline_y * config->height; > > + planar_offset[2] = planar_offset[1] + > > + bytesperline_c * config->height; > > + break; > > + default: /* raw */ > > + bytesperline_y = > > (v4l2_pixformat_get_bpp(config->pixelformat) * > > + config->width) / 8; > > + bytesperline_c = 0; > > + planar_offset[1] = -1; > > + planar_offset[2] = -1; > > + break; > > + } > > + > > + regmap_write(sdev->regmap, CSI_CH_BUF_LEN_REG, > > + CSI_CH_BUF_LEN_BUF_LEN_C(bytesperline_c) | > > + CSI_CH_BUF_LEN_BUF_LEN_Y(bytesperline_y)); > > +} > > + > > +static int get_supported_pixformats(struct sun6i_csi *csi, > > + const u32 **pixformats) > > +{ > > + if (pixformats != NULL) > > + *pixformats = supported_pixformats; > > + > > + return ARRAY_SIZE(supported_pixformats); > > +} > > + > > +static bool is_format_support(struct sun6i_csi *csi, u32 pixformat, > > + u32 mbus_code) > > +{ > > + struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi); > > + > > + return __is_format_support(sdev, pixformat, mbus_code); > > +} > > + > > +static int set_power(struct sun6i_csi *csi, bool enable) > > +{ > > + struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi); > > + struct regmap *regmap = sdev->regmap; > > + int ret; > > + > > + if (!enable) { > > + regmap_update_bits(regmap, CSI_EN_REG, > > CSI_EN_CSI_EN, 0); + > > + clk_disable_unprepare(sdev->clk_ram); > > + clk_disable_unprepare(sdev->clk_mod); > > + clk_disable_unprepare(sdev->clk_ahb); > > + reset_control_assert(sdev->rstc_ahb); > > + return 0; > > + } > > + > > + ret = clk_prepare_enable(sdev->clk_ahb); > > + if (ret) { > > + dev_err(sdev->dev, "Enable ahb clk err %d\n", ret); > > + return ret; > > + } > > + > > + ret = clk_prepare_enable(sdev->clk_mod); > > + if (ret) { > > + dev_err(sdev->dev, "Enable csi clk err %d\n", ret); > > + return ret; > > + } > > + > > + ret = clk_prepare_enable(sdev->clk_ram); > > + if (ret) { > > + dev_err(sdev->dev, "Enable clk_dram_csi clk err > > %d\n", ret); > > + return ret; > > + } > > + > > + if (!IS_ERR_OR_NULL(sdev->rstc_ahb)) { > > + ret = reset_control_deassert(sdev->rstc_ahb); > > + if (ret) { > > + dev_err(sdev->dev, "reset err %d\n", ret); > > + return ret; > > + } > > + } > > + > > + regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, > > CSI_EN_CSI_EN); + > > + return 0; > > +} > > > > Thank you in advance! > > Best regards, > > -- > Mylène Josserand, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com Thanks, Yong