Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752292AbdIXMgD (ORCPT ); Sun, 24 Sep 2017 08:36:03 -0400 Received: from fllnx209.ext.ti.com ([198.47.19.16]:42811 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752102AbdIXMgB (ORCPT ); Sun, 24 Sep 2017 08:36:01 -0400 Subject: Re: [PATCH v3 2/5] mtd: spi-nor: cadence-quadspi: add a delay in write sequence To: Marek Vasut , Cyrille Pitchen CC: David Woodhouse , Brian Norris , Boris Brezillon , Rob Herring , , , , linux-arm-kernel References: <20170924105924.23923-1-vigneshr@ti.com> <20170924105924.23923-3-vigneshr@ti.com> <94313cae-4805-0b13-a469-72aa7556b685@gmail.com> From: Vignesh R Message-ID: <8990b971-91d5-747f-905b-5e24743e090d@ti.com> Date: Sun, 24 Sep 2017 18:03:51 +0530 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.3.0 MIME-Version: 1.0 In-Reply-To: <94313cae-4805-0b13-a469-72aa7556b685@gmail.com> Content-Type: text/plain; charset="utf-8" Content-Language: en-US Content-Transfer-Encoding: 7bit X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3575 Lines: 108 On 9/24/2017 5:29 PM, Marek Vasut wrote: > On 09/24/2017 12:59 PM, Vignesh R wrote: >> As per 66AK2G02 TRM[1] SPRUHY8F section 11.15.5.3 Indirect Access >> Controller programming sequence, a delay equal to couple of QSPI master >> clock(~5ns) is required after setting CQSPI_REG_INDIRECTWR_START bit and >> writing data to the flash. Introduce a quirk flag CQSPI_NEEDS_WR_DELAY >> to handle this and set this flag for TI 66AK2G SoC. >> >> [1]http://www.ti.com/lit/ug/spruhy8f/spruhy8f.pdf >> >> Signed-off-by: Vignesh R > > Is this TI specific or is this controller property ? I wouldn't be > surprised of the later ... I am not sure, there is no generic public documentation by cadence for this IP. TI TRM clearly states this delay is required and I have verified it practically that this delay is indeed needed. But current user of this IP, socfpga does not seem to mention anything about it. So, I guess its TI specific quirk. > >> --- >> >> v3: >> Fix build warnings reported by kbuild test bot. >> >> drivers/mtd/spi-nor/cadence-quadspi.c | 27 ++++++++++++++++++++++++++- >> 1 file changed, 26 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c >> index 53c7d8e0327a..5cd5d6f7303f 100644 >> --- a/drivers/mtd/spi-nor/cadence-quadspi.c >> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c >> @@ -38,6 +38,9 @@ >> #define CQSPI_NAME "cadence-qspi" >> #define CQSPI_MAX_CHIPSELECT 16 >> >> +/* Quirks */ >> +#define CQSPI_NEEDS_WR_DELAY BIT(0) >> + >> struct cqspi_st; >> >> struct cqspi_flash_pdata { >> @@ -76,6 +79,7 @@ struct cqspi_st { >> u32 fifo_depth; >> u32 fifo_width; >> u32 trigger_address; >> + u32 wr_delay; >> struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT]; >> }; >> >> @@ -608,6 +612,15 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, >> reinit_completion(&cqspi->transfer_complete); >> writel(CQSPI_REG_INDIRECTWR_START_MASK, >> reg_base + CQSPI_REG_INDIRECTWR); >> + /* >> + * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access >> + * Controller programming sequence, couple of cycles of >> + * QSPI_REF_CLK delay is required for the above bit to >> + * be internally synchronized by the QSPI module. Provide 5 >> + * cycles of delay. >> + */ >> + if (cqspi->wr_delay) >> + ndelay(cqspi->wr_delay); >> >> while (remaining > 0) { >> write_bytes = remaining > page_size ? page_size : remaining; >> @@ -1156,6 +1169,7 @@ static int cqspi_probe(struct platform_device *pdev) >> struct cqspi_st *cqspi; >> struct resource *res; >> struct resource *res_ahb; >> + unsigned long data; >> int ret; >> int irq; >> >> @@ -1213,6 +1227,10 @@ static int cqspi_probe(struct platform_device *pdev) >> } >> >> cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk); >> + data = (unsigned long)of_device_get_match_data(dev); >> + if (data & CQSPI_NEEDS_WR_DELAY) >> + cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC, >> + cqspi->master_ref_clk_hz); >> >> ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0, >> pdev->name, cqspi); >> @@ -1284,7 +1302,14 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = { >> #endif >> >> static const struct of_device_id cqspi_dt_ids[] = { >> - {.compatible = "cdns,qspi-nor",}, >> + { >> + .compatible = "cdns,qspi-nor", >> + .data = (void *)0, >> + }, >> + { >> + .compatible = "ti,k2g-qspi", >> + .data = (void *)CQSPI_NEEDS_WR_DELAY, >> + }, >> { /* end of table */ } >> }; >> >> > >