Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S266644AbTGKJT4 (ORCPT ); Fri, 11 Jul 2003 05:19:56 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266631AbTGKJT4 (ORCPT ); Fri, 11 Jul 2003 05:19:56 -0400 Received: from fed1mtao02.cox.net ([68.6.19.243]:44164 "EHLO fed1mtao02.cox.net") by vger.kernel.org with ESMTP id S269849AbTGKJSz (ORCPT ); Fri, 11 Jul 2003 05:18:55 -0400 Date: Fri, 11 Jul 2003 02:33:35 -0700 From: "Barry K. Nathan" To: linux-kernel@vger.kernel.org Subject: [BUG] 100% reproducible oops on ATAPI CD-ROM I/O error, 2.5.75 Message-ID: <20030711093335.GC2860@ip68-4-255-84.oc.oc.cox.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25117 Lines: 1138 I added this as a comment to bugme.osdl.org bug 878, but here's a cleaned-up version of the reproduction instructions: 1. Take a blank CD-R, or a CD-RW whose contents are disposable, and place it into your recorder. 2. dd if=/dev/zero bs=1024k count=20 of=20zero.iso 3. cdrecord dev=/dev/hdc speed=10 blank=fast -v 20zero.iso (This is for a CD-RW disc. Omit "blank=" for a CD-R, and optionally omit it for a blank CD-RW. I think "blank=all" should also work for a CD-RW. Use whatever speed you feel appropriate. Replace "/dev/hdc" with your CD recorder. *DO NOT* use the "-dao" option; this procedure only makes the bug happen if the disc is recorded TAO, not DAO or SAO.) 4. At least on my LG DVD/CD-RW combo drive, the next step is faster if I eject the disc and insert it again. This is optional though. 5. readcd dev=/dev/hdc f=/dev/null (readcd chokes near the end of the CD, tries reading again, and oopses the kernel) Once you have created a disc of this kind, step 5 alone is sufficient to oops the kernel and bring the whole system down, if the kernel has this bug. Here's the output of readcd before it dies: # readcd dev=/dev/hdc f=/dev/null Read speed: 5634 kB/s (CD 32x, DVD 4x). Write speed: 1762 kB/s (CD 10x, DVD 1x). Capacity: 10242 Blocks = 20484 kBytes = 20 MBytes = 20 prMB Sectorsize: 2048 Bytes Copy from SCSI (0,0,0) disk to file '/dev/null' end: 10242 readcd: Success. read_g1: scsi sendcmd: no error CDB: 28 00 00 00 27 DE 00 00 24 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 73728 cmd finished after 6.600s timeout 40s readcd: Success. Cannot read source disk readcd: Retrying from sector 10206. . Yes, that single period is the last bit of output. And here's the oops itself: Unable to handle kernel paging request at virtual address c4e38098 *pde = 00012067 *pte = 04e38000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010002 EIP is at cdrom_decode_status+0x115/0x1ed eax: 00000000 ebx: c4e38004 ecx: c0406e2c edx: 00000000 esi: c0406e2c edi: 00000001 ebp: c03c9efc esp: c03c9ee8 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c03c8000 task=c03474e0) Stack: c4e38004 00000000 00000000 00000000 c4e38004 c03c9f34 c0259c2a c0406e2c 00000000 c03c9f24 00000000 00000001 c03474e0 00000000 00000000 00000051 c03c8000 c0406e2c 00000202 c03c9f54 c024e38c c0406e2c c0259bb6 c0406d80 Call Trace: [] cdrom_newpc_intr+0x74/0x3dd [] ide_intr+0x102/0x16f [] cdrom_newpc_intr+0x0/0x3dd [] handle_IRQ_event+0x25/0x4d [] do_IRQ+0xb7/0x138 [] default_idle+0x0/0x2b [] _stext+0x0/0x4c [] common_interrupt+0x18/0x20 [] default_idle+0x0/0x2b [] _stext+0x0/0x4c [] default_idle+0x26/0x2b [] cpu_idle+0x22/0x37 [] start_kernel+0x161/0x163 Code: ff b3 94 00 00 00 ff 75 f0 e9 9d 00 00 00 f6 c2 10 0f 84 9c <0>Kernel panic: Fatal exception in interrupt In interrupt handler - not syncing FWIW, my kernel boot command line contains "devfs=mount acpi=off". I don't remember why I'm using these arguments, so I'm open to changing them (or my .config). The remainder of my message (after my signature) is the .config I used. Disabling Taskfile I/O and Taskfile Access does not prevent this oops. Does anyone have any suggestions for investigating or fixing this bug? Thanks. -Barry K. Nathan # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_EMBEDDED is not set CONFIG_FUTEX=y CONFIG_EPOLL=y # # Loadable module support # # CONFIG_MODULES is not set # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_HUGETLB_PAGE=y # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_EDD=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_APM is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_PROC_INTF=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_24_API=y CONFIG_CPU_FREQ_TABLE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_ICH is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Generic Driver Options # # CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y CONFIG_PARPORT_SERIAL=y CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_NAMES=y CONFIG_PNP_DEBUG=y # # Protocols # CONFIG_ISAPNP=y CONFIG_PNPBIOS=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_PCI_WIP=y CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI device support # # CONFIG_SCSI is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_FTP=y CONFIG_IP_NF_IRC=y # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_UNCLEAN=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_MIRROR=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IP_NF_NAT_SNMP_BASIC=y CONFIG_IP_NF_NAT_IRC=y CONFIG_IP_NF_NAT_FTP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # CONFIG_IPV6 is not set # CONFIG_XFRM_USER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices (depends on LLC=y) # # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set # CONFIG_SERIAL_8250_SHARE_IRQ is not set # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y CONFIG_LP_CONSOLE=y # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # CONFIG_I2C=y # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_CHARDEV=y # # I2C Hardware Sensors Mainboard support # CONFIG_I2C_ALI1535=y # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y CONFIG_I2C_ISA=y # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIAPRO is not set # # I2C Hardware Sensors Chip support # CONFIG_SENSORS_ADM1021=y CONFIG_SENSORS_IT87=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM85=y CONFIG_SENSORS_LM78=y # CONFIG_SENSORS_VIA686A is not set CONFIG_SENSORS_W83781D=y CONFIG_I2C_SENSOR=y # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # CONFIG_SOFT_WATCHDOG is not set # CONFIG_WDT is not set # CONFIG_WDTPCI is not set # CONFIG_PCWATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set CONFIG_I810_TCO=y # CONFIG_MIXCOMWD is not set # CONFIG_SCx200_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_AMD7XX_TCO is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_SC1200_WDT is not set # CONFIG_WAFER_WDT is not set # CONFIG_CPU5_WDT is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HANGCHECK_TIMER=y # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # SCSI support is needed for USB Storage # # # USB Human Interface Devices (HID) # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_AX8817X is not set # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_DEBUG is not set # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # Bluetooth support # # CONFIG_BT is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_IOVIRT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_PAGEALLOC=y CONFIG_KALLSYMS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # # CONFIG_CRC32 is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/