Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265303AbTGKT3z (ORCPT ); Fri, 11 Jul 2003 15:29:55 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265219AbTGKT0t (ORCPT ); Fri, 11 Jul 2003 15:26:49 -0400 Received: from mail-7.tiscali.it ([195.130.225.153]:42304 "EHLO mail-7.tiscali.it") by vger.kernel.org with ESMTP id S265145AbTGKTX6 (ORCPT ); Fri, 11 Jul 2003 15:23:58 -0400 Date: Fri, 11 Jul 2003 21:36:11 +0200 From: Kronos To: linux-kernel@vger.kernel.org Cc: acpi-support@lists.sourceforge.net, pavel@suse.cz Subject: [2.5.75] S3 and S4 Message-ID: <20030711193611.GA824@dreamland.darkstar.lan> Reply-To: kronos@kronoz.cjb.net Mail-Followup-To: linux-kernel@vger.kernel.org, acpi-support@lists.sourceforge.net, pavel@suse.cz Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 27474 Lines: 722 Hi, I've been playing with ACPI and software suspend. I have an AthlonXP on a KT333 motherboard. Kernel UP with preemption. S3 doesn't work with FB (well, I can suspend the machine but the screen isn't restored on resume. I can blindly login and reboot) but I read on fbdev that this is a WIP. Without FB the system goes to sleep with some warnings (we call local_bh_enable with interrupts disabled): Stopping tasks: klogd entered refrigerator =init entered refrigerator =pdflush entered refrigerator =pdflush entered refrigerator =kswapd0 entered refrigerator =kseriod entered refrigerator =devfsd entered refrigerator =xfs_syncd entered refrigerator =xfs_syncd entered refrigerator =acpid entered refrigerator =syslogd entered refrigerator =xinetd entered refrigerator =named entered refrigerator =named entered refrigerator =named entered refrigerator =named entered refrigerator =named entered refrigerator =rc.news entered refrigerator =squid entered refrigerator =squid entered refrigerator =unlinkd entered refrigerator =sshd entered refrigerator =lpd entered refrigerator =crond entered refrigerator =atd entered refrigerator =master entered refrigerator =pickup entered refrigerator =qmgr entered refrigerator =gpm entered refrigerator =portsentry entered refrigerator =portsentry entered refrigerator =tail entered refrigerator =agetty entered refrigerator =agetty entered refrigerator =agetty entered refrigerator =agetty entered refrigerator =agetty entered refrigerator =agetty entered refrigerator =agetty entered refrigerator =innwatch entered refrigerator =sleep entered refrigerator =| Suspending devices Suspending devices hdd: start_power_step(step: 0) hdd: completing PM request, suspend hdc: start_power_step(step: 0) hdc: completing PM request, suspend hdb: start_power_step(step: 0) hdb: start_power_step(step: 1) hdb: complete_power_step(step: 1, stat: 50, err: 0) hdb: completing PM request, suspend hda: start_power_step(step: 0) hda: start_power_step(step: 1) hda: complete_power_step(step: 1, stat: 50, err: 0) hda: completing PM request, suspend Suspending devices Badness in local_bh_enable at kernel/softirq.c:113 Call Trace: [] local_bh_enable+0x88/0x90 [] e100_do_wol+0x14/0x60 [e100] [] e100_suspend+0x3e/0xa0 [e100] [] e100_suspend+0x0/0xa0 [e100] [] pci_device_suspend+0x47/0x70 [] device_suspend+0xd9/0x100 [] acpi_system_save_state+0x42/0x8c [] acpi_suspend+0x5e/0xb3 [] acpi_system_write_sleep+0xe3/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb Badness in local_bh_enable at kernel/softirq.c:113 Call Trace: [] local_bh_enable+0x88/0x90 [] e100_config+0x1b5/0x280 [e100] [] local_bh_enable+0x88/0x90 [] e100_do_wol+0x1c/0x60 [e100] [] e100_suspend+0x3e/0xa0 [e100] [] e100_suspend+0x0/0xa0 [e100] [] pci_device_suspend+0x47/0x70 [] device_suspend+0xd9/0x100 [] acpi_system_save_state+0x42/0x8c [] acpi_suspend+0x5e/0xb3 [] acpi_system_write_sleep+0xe3/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb Badness in local_bh_enable at kernel/softirq.c:113 Call Trace: [] local_bh_enable+0x88/0x90 [] e100_exec_non_cu_cmd+0x49c/0x790 [e100] [] dump_stack+0x1e/0x20 [] e100_config+0x1c4/0x280 [e100] [] local_bh_enable+0x88/0x90 [] e100_do_wol+0x1c/0x60 [e100] [] e100_suspend+0x3e/0xa0 [e100] [] e100_suspend+0x0/0xa0 [e100] [] pci_device_suspend+0x47/0x70 [] device_suspend+0xd9/0x100 [] acpi_system_save_state+0x42/0x8c [] acpi_suspend+0x5e/0xb3 [] acpi_system_write_sleep+0xe3/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb hwsleep-0257 [10] acpi_enter_sleep_state: Entering sleep state [S3] And then the resume: Enabling SEP on CPU 0 Back to C! Devices Resumed hda: Wakeup request inited, waiting for !BSY... hda: start_power_step(step: 1000) blk: queue c0461a3c, I/O limit 4095Mb (mask 0xffffffff) hda: completing PM request, resume hdb: Wakeup request inited, waiting for !BSY... hdb: start_power_step(step: 1000) blk: queue c0461dfc, I/O limit 4095Mb (mask 0xffffffff) hdb: completing PM request, resume hdc: Wakeup request inited, waiting for !BSY... hdc: start_power_step(step: 1000) hdc: completing PM request, resume hdd: Wakeup request inited, waiting for !BSY... hdd: start_power_step(step: 1000) hdd: completing PM request, resume Devices Resumed Restarting tasks... done init left refrigerator pdflush left refrigerator pdflush left refrigerator kswapd0 left refrigerator kseriod left refrigerator devfsd left refrigerator xfs_syncd left refrigerator xfs_syncd left refrigerator acpid left refrigerator syslogd left refrigerator klogd left refrigerator xinetd left refrigerator named left refrigerator named left refrigerator named left refrigerator named left refrigerator named left refrigerator rc.news left refrigerator squid left refrigerator squid left refrigerator unlinkd left refrigerator sshd left refrigerator lpd left refrigerator crond left refrigerator atd left refrigerator master left refrigerator pickup left refrigerator qmgr left refrigerator gpm left refrigerator portsentry left refrigerator portsentry left refrigerator tail left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator innwatch left refrigerator sleep left refrigerator e100: eth0 NIC Link is Up 10 Mbps Half duplex MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: d46ee00000007fee MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: f713eeedb75ae7fd MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 2: f60000000000feff MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 3: fc0000000000ffef I'm a bit worried about these MCEs, but the machine seems stable after resume (btw, I remeber that Alan once posted a MCE decoder, but can't find it - any clue?). S4 suspends fine, but it seems that it doesn't like preemption on resume: ......[lots of dots]......[nosave c041c000]Enabling SEP on CPU 0 Freeing prev allocated pagedir bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] pci_read+0x3b/0x40 [] schedule_timeout+0x88/0xe0 [] pci_write+0x3c/0x40 [] process_timeout+0x0/0x10 [] pci_set_power_state+0xe4/0x190 [] e100_resume+0x28/0x70 [e100] [] pci_device_resume+0x2d/0x30 [] device_resume+0xb6/0xd0 [] drivers_resume+0x8c/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] __alloc_pages+0x8e/0x330 [] sys_sched_yield+0x13d/0x210 [] e100_exec_non_cu_cmd+0x4a1/0x790 [e100] [] e100_setup_iaaddr+0x50/0x80 [e100] [] e100_configure_device+0xa8/0x100 [e100] [] e100_deisolate_driver+0xdc/0x100 [e100] [] e100_resume+0x62/0x70 [e100] [] pci_device_resume+0x2d/0x30 [] device_resume+0xb6/0xd0 [] drivers_resume+0x8c/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] __alloc_pages+0x8e/0x330 [] sys_sched_yield+0x13d/0x210 [] e100_exec_non_cu_cmd+0x4a1/0x790 [e100] [] e100_set_multi_exec+0x92/0xc0 [e100] [] e100_configure_device+0xca/0x100 [e100] [] e100_deisolate_driver+0xdc/0x100 [e100] [] e100_resume+0x62/0x70 [e100] [] pci_device_resume+0x2d/0x30 [] device_resume+0xb6/0xd0 [] drivers_resume+0x8c/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] show_trace+0x42/0x90 [] __alloc_pages+0x8e/0x330 [] sys_sched_yield+0x13d/0x210 [] e100_exec_non_cu_cmd+0x4a1/0x790 [e100] [] e100_config+0x1c4/0x280 [e100] [] e100_force_config+0x109/0x1b0 [e100] [] e100_configure_device+0xef/0x100 [e100] [] e100_deisolate_driver+0xdc/0x100 [e100] [] e100_resume+0x62/0x70 [e100] [] pci_device_resume+0x2d/0x30 [] device_resume+0xb6/0xd0 [] drivers_resume+0x8c/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb hda: Wakeup request inited, waiting for !BSY... hda: start_power_step(step: 1000) blk: queue c0461a3c, I/O limit 4095Mb (mask 0xffffffff) hda: completing PM request, resume hdb: Wakeup request inited, waiting for !BSY... hdb: start_power_step(step: 1000) blk: queue c0461dfc, I/O limit 4095Mb (mask 0xffffffff) hdb: completing PM request, resume hdc: Wakeup request inited, waiting for !BSY... hdc: start_power_step(step: 1000) hdc: completing PM request, resume hdd: Wakeup request inited, waiting for !BSY... hdd: start_power_step(step: 1000) hdd: completing PM request, resume Devices Resumed Devices Resumed bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] __alloc_pages+0x8e/0x330 [] sys_sched_yield+0x13d/0x210 [] e100_exec_non_cu_cmd+0x4a1/0x790 [e100] [] e100_setup_iaaddr+0x50/0x80 [e100] [] e100_configure_device+0xa8/0x100 [e100] [] e100_deisolate_driver+0xdc/0x100 [e100] [] e100_resume+0x62/0x70 [e100] [] pci_pm_resume_device+0x26/0x30 [] pci_pm_resume_bus+0x2b/0x70 [] pci_pm_resume+0x31/0x40 [] pci_pm_callback+0x3d/0x60 [] pm_send+0x69/0x90 [] pm_send_all+0x86/0xc0 [] drivers_resume+0x36/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] __alloc_pages+0x8e/0x330 [] sys_sched_yield+0x13d/0x210 [] e100_exec_non_cu_cmd+0x4a1/0x790 [e100] [] e100_set_multi_exec+0x92/0xc0 [e100] [] e100_configure_device+0xca/0x100 [e100] [] e100_deisolate_driver+0xdc/0x100 [e100] [] e100_resume+0x62/0x70 [e100] [] pci_pm_resume_device+0x26/0x30 [] pci_pm_resume_bus+0x2b/0x70 [] pci_pm_resume+0x31/0x40 [] pci_pm_callback+0x3d/0x60 [] pm_send+0x69/0x90 [] pm_send_all+0x86/0xc0 [] drivers_resume+0x36/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] show_trace+0x42/0x90 [] __alloc_pages+0x8e/0x330 [] sys_sched_yield+0x13d/0x210 [] e100_exec_non_cu_cmd+0x4a1/0x790 [e100] [] e100_config+0x1c4/0x280 [e100] [] e100_force_config+0x109/0x1b0 [e100] [] e100_configure_device+0xef/0x100 [e100] [] e100_deisolate_driver+0xdc/0x100 [e100] [] e100_resume+0x62/0x70 [e100] [] pci_pm_resume_device+0x26/0x30 [] pci_pm_resume_bus+0x2b/0x70 [] pci_pm_resume+0x31/0x40 [] pci_pm_callback+0x3d/0x60 [] pm_send+0x69/0x90 [] pm_send_all+0x86/0xc0 [] drivers_resume+0x36/0xa0 [] do_magic_resume_2+0xc5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb Fixing swap signatures... <3>bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] generic_make_request+0x17d/0x210 [] autoremove_wake_function+0x0/0x50 [] io_schedule+0xe/0x20 [] wait_on_page_bit+0xa2/0xd0 [] autoremove_wake_function+0x0/0x50 [] autoremove_wake_function+0x0/0x50 [] swap_readpage+0x5b/0x80 [] rw_swap_page_sync+0xba/0x110 [] mark_swapfiles+0x7e/0x1b0 [] do_magic_resume_2+0xe5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] io_schedule+0xe/0x20 [] wait_on_page_bit+0xa2/0xd0 [] autoremove_wake_function+0x0/0x50 [] autoremove_wake_function+0x0/0x50 [] end_swap_bio_write+0x0/0x50 [] rw_swap_page_sync+0xba/0x110 [] mark_swapfiles+0xf1/0x1b0 [] do_magic_resume_2+0xe5/0x170 [] restore_processor_state+0x70/0x90 [] do_magic+0x11f/0x140 [] do_software_suspend+0x6d/0xa0 [] acpi_system_write_sleep+0x11b/0x132 [] filp_open+0x60/0x70 [] vfs_write+0xad/0x120 [] sys_write+0x3f/0x60 [] syscall_call+0x7/0xb ok Restarting processes... Restarting tasks... done bad: scheduling while atomic! Call Trace: [] schedule+0x6ce/0x6e0 [] sys_write+0x3f/0x60 [] work_resched+0x5/0x16 init left refrigerator pdflush left refrigerator kswapd0 left refrigerator xfs_syncd left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator agetty left refrigerator Unable to handle kernel paging request at virtual address 40107114 printing eip: 40107114 *pde = 2dbf6067 *pte = 00000000 Oops: 0004 [#1] CPU: 0 EIP: 0073:[<40107114>] Not tainted EFLAGS: 00010202 EIP is at 0x40107114 eax: ffffffea ebx: 00000001 ecx: 080d440c edx: 00000002 esi: 00000002 edi: 080d440c ebp: bffffae8 esp: bffffab8 ds: 007b es: 007b ss: 007b Process bash (pid: 484, threadinfo=ed776000 task=ef1e40c0) <6>note: bash[484] exited with preempt_count 1 pdflush left refrigerator e100: eth0 NIC Link is Up 10 Mbps Half duplex ksymoops says: Warning (Oops_read): Code line not seen, dumping what data is available >>EIP; 40107114 Before first symbol <===== >>eax; ffffffea <__kernel_rt_sigreturn+1baa/????> This is my dmesg: Linux version 2.5.75 (root@dreamland) (gcc version 3.2.3) #40 Fri Jul 11 16:37:24 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 767MB LOWMEM available. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192496 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 VIA694 ) @ 0x000f75b0 ACPI: RSDT (v001 VIA694 AWRDACPI 16944.11825) @ 0x2fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 16944.11825) @ 0x2fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux-2.5.75 ro root=305 BOOT_FILE=/bzImage-2.5.75 video=radeonfb:640x480-8@60 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1470.676 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2891.77 BogoMIPS Memory: 774064k/786368k available (2441k kernel code, 11536k reserved, 840k data, 164k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1700+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1469.0806 MHz. ..... host bus clock speed is 267.0237 MHz. Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030619 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................... Table [DSDT](id F004) - 464 Objects with 38 Devices 115 Methods 31 Regions ACPI Namespace successfully loaded at root c04728bc spurious 8259A interrupt: IRQ7. evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000004020 on int 9 Completing Region/Field/Buffer/Package initialization:............................................................................. Initialized 31/31 Regions 13/13 Fields 20/20 Buffers 13/13 Packages (472 nodes) Executing all Device _STA and_INI methods:....................................... 39 Devices found containing: 39 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.96 (c) Adam Belay pnp: the driver 'system' has been registered PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf10 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf40, dseg 0xf0000 pnp: match found with the PnP device '00:07' and the driver 'system' pnp: match found with the PnP device '00:08' and the driver 'system' pnp: match found with the PnP device '00:0b' and the driver 'system' PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' radeonfb_pci_register BEGIN radeonfb: ref_clk=2700, ref_div=12, xclk=27000 defaults radeonfb: probed SDR SGRAM 131072k videoram radeon_get_moninfo: bios 4 scratch = 2000002 radeonfb: ATI Radeon 9700 NE SDR SGRAM 128 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected radeonfb_pci_register END hStart = 664, hEnd = 760, hTotal = 800 vStart = 491, vEnd = 493, vTotal = 525 h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2 v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea post div = 0x8 fb_div = 0x59 ppll_div_3 = 0x30059 ron = 784, roff = 19320 vclk_freq = 2503, per = 690 Console: switching to colour frame buffer device 80x30 pty: 256 Unix98 ptys configured Machine check exception polling timer started. Enabling SEP on CPU 0 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (56 C) request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro KT266/KT333 chipset agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 128M @ 0xd0000000 [drm] Initialized radeon 1.8.0 20020828 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:0c' and the driver 'serial' pnp: match found with the PnP device '00:10' and the driver 'serial' pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:0f' and the driver 'parport_pc' parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6Y120L0, ATA DISK drive hdb: QUANTUM FIREBALLlct10 10, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CRD-8520B, ATAPI CD/DVD-ROM drive hdd: WAITEC ALADAR/1, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area => 1 hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(133) /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > hdb: max request size: 128KiB hdb: host protected area => 1 hdb: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=19885/16/63 /dev/ide/host0/bus0/target1/lun0: p1 p2 hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) Console: switching to colour frame buffer device 80x30 mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 37449) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.09 2003-Jan-22, 2 devices found ACPI: (supports S0 S3 S4 S5) VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 164k freed Adding 265064k swap on /dev/hdb2. Priority:9 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda7) for (hda7) Using r5 hash to sort names SGI XFS for Linux 2.5.75 with no debug enabled XFS mounting filesystem hda6 Ending clean XFS mount for filesystem: hda6 XFS mounting filesystem hda8 Ending clean XFS mount for filesystem: hda8 NTFS driver 2.1.4 [Flags: R/O DEBUG MODULE]. NTFS volume version 3.1. FAT: Unrecognized mount option mode Real Time Clock Driver v1.11 IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver Intel(R) PRO/100 Network Driver - version 2.3.13-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection CBQ: class 00010001 has bad quantum==0, repaired. e100: eth0 NIC Link is Up 10 Mbps Half duplex PCI: Setting latency timer of device 0000:00:11.5 to 64 registering 0-0290 Luca -- Reply-To: kronos@kronoz.cjb.net Home: http://kronoz.cjb.net Do, or do not. There is no try. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/