Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753067AbdLEN0q (ORCPT ); Tue, 5 Dec 2017 08:26:46 -0500 Received: from relay06.alfahosting-server.de ([109.237.142.242]:34347 "EHLO relay06.alfahosting-server.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752464AbdLEN0h (ORCPT ); Tue, 5 Dec 2017 08:26:37 -0500 X-Spam-DCC: : From: Richard Leitner To: robh+dt@kernel.org, mark.rutland@arm.com, fugang.duan@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, frowand.list@gmail.com Cc: davem@davemloft.net, geert+renesas@glider.be, sergei.shtylyov@cogentembedded.com, baruch@tkos.co.il, david.wu@rock-chips.com, lukma@denx.de, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, richard.leitner@skidata.com Subject: [PATCH net-next v3 3/4] net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag Date: Tue, 5 Dec 2017 14:25:59 +0100 Message-Id: <20171205132600.13796-4-dev@g0hl1n.net> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171205132600.13796-1-dev@g0hl1n.net> References: <20171205132600.13796-1-dev@g0hl1n.net> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 951 Lines: 29 From: Richard Leitner The Microchip/SMSC LAN8710/LAN8720 PHYs need (according to their datasheet [1]) a continuous REF_CLK when configured to "REF_CLK In Mode". Therefore set the PHY_RST_AFTER_CLK_EN flag for those PHYs to let the ETH driver reset them after the REF_CLK is enabled. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00002165B.pdf Signed-off-by: Richard Leitner --- drivers/net/phy/smsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index a1961ba87e2b..be399d645224 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -312,7 +312,7 @@ static struct phy_driver smsc_phy_driver[] = { .name = "SMSC LAN8710/LAN8720", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT | PHY_RST_AFTER_CLK_EN, .probe = smsc_phy_probe, -- 2.11.0