Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753158AbdLEPL2 (ORCPT ); Tue, 5 Dec 2017 10:11:28 -0500 Received: from mail.free-electrons.com ([62.4.15.54]:56224 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752979AbdLEPKs (ORCPT ); Tue, 5 Dec 2017 10:10:48 -0500 From: Maxime Ripard To: Daniel Vetter , David Airlie , Chen-Yu Tsai , Maxime Ripard Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, Mark Rutland , Rob Herring , linux-arm-kernel@lists.infradead.org, plaes@plaes.org, icenowy@aosc.io, Thomas Petazzoni , jernej.skrabec@siol.net, devicetree@vger.kernel.org Subject: [PATCH v3 15/15] ARM: dts: sun8i: a711: Enable the LCD Date: Tue, 5 Dec 2017 16:10:27 +0100 Message-Id: <3cd7410e37b1f93350872f5472e37e68da6d082d.1512486553.git-series.maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.14.3 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2316 Lines: 111 The A711 has 1024x600 LVDS panel, with a PWM-based backlight. Add it to our DT. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 61 ++++++++++++++++++++++++- 1 file changed, 61 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index a021ee6da396..511fca491fe8 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -45,6 +45,7 @@ #include "sun8i-a83t.dtsi" #include +#include / { model = "TBS A711 Tablet"; @@ -59,6 +60,44 @@ stdout-path = "serial0:115200n8"; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; + + brightness-levels = <0 1 2 4 8 16 32 64 128 255>; + default-brightness-level = <9>; + }; + + panel { + compatible = "tbs,a711-panel", "panel-lvds"; + backlight = <&backlight>; + power-supply = <®_sw>; + + width-mm = <153>; + height-mm = <90>; + data-mapping = "vesa-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <52000000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <20>; + hfront-porch = <180>; + hback-porch = <160>; + vfront-porch = <12>; + vback-porch = <23>; + vsync-len = <5>; + }; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -89,6 +128,10 @@ }; }; +&de { + status = "okay"; +}; + /* * An USB-2 hub is connected here, which also means we don't need to * enable the OHCI controller. @@ -142,6 +185,12 @@ status = "okay"; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pin>; + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -323,6 +372,18 @@ regulator-name = "vcc-lcd"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_lvds_pins>; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; -- git-series 0.9.1