Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264242AbTGMMj7 (ORCPT ); Sun, 13 Jul 2003 08:39:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264448AbTGMMj7 (ORCPT ); Sun, 13 Jul 2003 08:39:59 -0400 Received: from tag.witbe.net ([81.88.96.48]:30225 "EHLO tag.witbe.net") by vger.kernel.org with ESMTP id S264242AbTGMMjy (ORCPT ); Sun, 13 Jul 2003 08:39:54 -0400 From: "Paul Rolland" To: Cc: Subject: [2.5.75] Oops at boot : kobject_get from nbd_init Date: Sun, 13 Jul 2003 14:54:39 +0200 Message-ID: <010a01c3493d$ebec23e0$2101a8c0@witbe> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.4510 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8258 Lines: 187 Hello, I've the following when booting a vanilla 2.5.75, no module configured, just plain stock kernel. LILO boot: debug Loading debug............................................. Linux version 2.5.75 (root@donald.as2917.net) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Sun Jul 13 14:44:22 CEST 2003 Video mode to be used for restore is f01 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131068 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126972 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 ASUS ) @ 0x000f5820 ACPI: RSDT (v001 ASUS P4S8X 16944.11825) @ 0x1fffc000 ACPI: FADT (v001 ASUS P4S8X 16944.11825) @ 0x1fffc0b2 ACPI: BOOT (v001 ASUS P4S8X 16944.11825) @ 0x1fffc030 ACPI: MADT (v001 ASUS P4S8X 16944.11825) @ 0x1fffc058 ACPI: DSDT (v001 ASUS P4S8X 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=debug ro BOOT_FILE=/boot/vmlinuz-2.5.75 panic=30 idebus=66 hdd=ide-cd console=tty1 console=ttyS0 ide_setup: idebus=66 ide_setup: hdd=ide-cd Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 2423.819 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 4784.12 BogoMIPS Memory: 513092k/524272k available (3398k kernel code, 10388k reserved, 1097k data, 396k init, 0k highmem) Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2423.0438 MHz. ..... host bus clock speed is 134.0635 MHz. Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xf11a0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030619 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Enabling SiS 96x SMBus. Linux Plug and Play Support v0.96 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: No IRQ known for interrupt pin A of device 0000:00:03.0 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available IA-32 Microcode Update Driver: v1.11 Enabling SEP on CPU 0 VFS: Disk quotas dquot_6.5.1 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.4 [Flags: R/O]. udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) lp: driver loaded but no devices found Real Time Clock Driver v1.11 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Unsupported SiS chipset (device id: 0648), you might want to try agp_try_unsupported=1. [drm] Initialized radeon 1.8.0 20020828 on minor 0 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: Printer, HEWLETT-PACKARD DESKJET 920C lp0: using parport0 (polling). anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Unable to handle kernel paging request at virtual address 33cc33e8 printing eip: c0256509 *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010206 EIP is at kobject_get+0xf/0x4e eax: 33cc33d4 ebx: 33cc33d4 ecx: c04725cd edx: c049a8bc esi: dfd8fd3c edi: dfd8fd3c ebp: 00000440 esp: dff8df3c ds: 007b es: 007b ss: 0068 Process swapper (pid: 1, threadinfo=dff8c000 task=dff8f880) Stack: dfd90bfc dfd90bfc dfd90bfc ffffffff dfd8fd3c c0256227 33cc33d4 dfd8fc00 c02563dd dfd8fd3c dfd8fd3c 00000014 dfd8fc00 c05ee1e8 c02c7e5f dfd8fd3c 00000014 c049a8ba c04725c8 dfd90b80 c05ee1e8 00000010 c0580430 dfd90b80 Call Trace: [] kobject_init+0x2d/0x48 [] kobject_register+0x1b/0x5a [] blk_register_queue+0x83/0xa8 [] nbd_init+0x154/0x1ac [] exact_match+0x0/0x8 [] do_initcalls+0x27/0x94 [] init_workqueues+0xf/0x26 [] init+0x36/0x194 [] init+0x0/0x194 [] kernel_thread_helper+0x5/0xc Code: 8b 43 14 85 c0 74 0d ff 43 14 89 d8 8b 5c 24 10 83 c4 14 c3 <0>Kernel panic: Attempted to kill init! <0>Rebooting in 30 seconds.. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/