Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752248AbdLFPae (ORCPT ); Wed, 6 Dec 2017 10:30:34 -0500 Received: from mail.kmu-office.ch ([178.209.48.109]:34285 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752209AbdLFPad (ORCPT ); Wed, 6 Dec 2017 10:30:33 -0500 From: Stefan Agner To: shawnguo@kernel.org, kernel@pengutronix.de Cc: fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Stefan Agner Subject: [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Date: Wed, 6 Dec 2017 16:29:57 +0100 Message-Id: <20171206153005.6144-1-stefan@agner.ch> X-Mailer: git-send-email 2.15.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2738 Lines: 80 The Colibri default which enables USB Host power is not necessarily tied to the OTG2 controller, some carrier board use the pin to control USB power for both controllers. Hence name the pinctrl group more generic. Also move the regulator to the generic eval-v3 device tree since the regulator is always on the carrier board. In the Colibri iMX7S case the regulator is just not used. This allows to reuse the regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. Signed-off-by: Stefan Agner --- arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++++ arch/arm/boot/dts/imx7-colibri.dtsi | 2 +- arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 13 +------------ 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 18bebd6d8d47..5ecb3a858c5a 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -70,6 +70,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &bl { diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index bb5bf94f1a32..60ea7557d8c9 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -559,7 +559,7 @@ >; }; - pinctrl_usbotg2_reg: gpio-usbotg2-vbus { + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ >; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index a608a14d8c85..136e11ab4893 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -48,20 +48,9 @@ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", "fsl,imx7d"; - - reg_usb_otg2_vbus: regulator-usb-otg2-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; -- 2.15.1