Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752468AbdLFPoA (ORCPT ); Wed, 6 Dec 2017 10:44:00 -0500 Received: from mga06.intel.com ([134.134.136.31]:36530 "EHLO mga06.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752121AbdLFPny (ORCPT ); Wed, 6 Dec 2017 10:43:54 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.45,368,1508828400"; d="scan'208";a="15971221" From: Vinod Koul To: Greg Kroah-Hartman Cc: LKML , ALSA , Mark , Takashi , Pierre , patches.audio@intel.com, alan@linux.intel.com, Charles Keepax , Sagar Dharia , srinivas.kandagatla@linaro.org, plai@codeaurora.org, Sudheer Papothi Subject: [PATCH v5 05/15] soundwire: Add SoundWire MIPI defined registers Date: Wed, 6 Dec 2017 21:17:01 +0530 Message-Id: <1512575231-4154-6-git-send-email-vinod.koul@intel.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1512575231-4154-1-git-send-email-vinod.koul@intel.com> References: <1512575231-4154-1-git-send-email-vinod.koul@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7201 Lines: 214 From: Sanyog Kale MIPI SoundWire spec defines standard SoundWire registers mandatory for SoundWire Slave devices, so add them. Signed-off-by: Sanyog Kale Signed-off-by: Vinod Koul --- include/linux/soundwire/sdw_registers.h | 194 ++++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 include/linux/soundwire/sdw_registers.h diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h new file mode 100644 index 000000000000..df472b1ab410 --- /dev/null +++ b/include/linux/soundwire/sdw_registers.h @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_REGISTERS_H +#define __SDW_REGISTERS_H + +/* + * typically we define register and shifts but if one observes carefully, + * the shift can be generated from MASKS using few bit primitaives like ffs + * etc, so we use that and avoid defining shifts + */ +#define SDW_REG_SHIFT(n) (ffs(n) - 1) + +/* + * SDW registers as defined by MIPI 1.1 Spec + */ +#define SDW_REGADDR GENMASK(14, 0) +#define SDW_SCP_ADDRPAGE2_MASK GENMASK(22, 15) +#define SDW_SCP_ADDRPAGE1_MASK GENMASK(30, 23) + +#define SDW_REG_NO_PAGE 0x00008000 +#define SDW_REG_OPTIONAL_PAGE 0x00010000 +#define SDW_REG_MAX 0x80000000 + +#define SDW_DPN_SIZE 0x100 +#define SDW_BANK1_OFFSET 0x10 + +/* + * DP0 Interrupt register & bits + * + * Spec treats Status (RO) and Clear (WC) as separate but they are same + * address, so treat as same register with WC. + */ + +/* both INT and STATUS register are same */ +#define SDW_DP0_INT 0x0 +#define SDW_DP0_INTMASK 0x1 +#define SDW_DP0_PORTCTRL 0x2 +#define SDW_DP0_BLOCKCTRL1 0x3 +#define SDW_DP0_PREPARESTATUS 0x4 +#define SDW_DP0_PREPARECTRL 0x5 + +#define SDW_DP0_INT_TEST_FAIL BIT(0) +#define SDW_DP0_INT_PORT_READY BIT(1) +#define SDW_DP0_INT_BRA_FAILURE BIT(2) +#define SDW_DP0_INT_IMPDEF1 BIT(5) +#define SDW_DP0_INT_IMPDEF2 BIT(6) +#define SDW_DP0_INT_IMPDEF3 BIT(7) + +#define SDW_DP0_PORTCTRL_DATAMODE GENMASK(3, 2) +#define SDW_DP0_PORTCTRL_NXTINVBANK BIT(4) +#define SDW_DP0_PORTCTRL_BPT_PAYLD GENMASK(7, 6) + +#define SDW_DP0_CHANNELEN 0x20 +#define SDW_DP0_SAMPLECTRL1 0x22 +#define SDW_DP0_SAMPLECTRL2 0x23 +#define SDW_DP0_OFFSETCTRL1 0x24 +#define SDW_DP0_OFFSETCTRL2 0x25 +#define SDW_DP0_HCTRL 0x26 +#define SDW_DP0_LANECTRL 0x28 + +/* Both INT and STATUS register are same */ +#define SDW_SCP_INT1 0x40 +#define SDW_SCP_INTMASK1 0x41 + +#define SDW_SCP_INT1_PARITY BIT(0) +#define SDW_SCP_INT1_BUS_CLASH BIT(1) +#define SDW_SCP_INT1_IMPL_DEF BIT(2) +#define SDW_SCP_INT1_SCP2_CASCADE BIT(7) +#define SDW_SCP_INT1_PORT0_3 GENMASK(6, 3) + +#define SDW_SCP_INTSTAT2 0x42 +#define SDW_SCP_INTSTAT2_SCP3_CASCADE BIT(7) +#define SDW_SCP_INTSTAT2_PORT4_10 GENMASK(6, 0) + + +#define SDW_SCP_INTSTAT3 0x43 +#define SDW_SCP_INTSTAT3_PORT11_14 GENMASK(3, 0) + +/* Number of interrupt status registers */ +#define SDW_NUM_INT_STAT_REGISTERS 3 + +/* Number of interrupt clear registers */ +#define SDW_NUM_INT_CLEAR_REGISTERS 1 + +#define SDW_SCP_CTRL 0x44 +#define SDW_SCP_CTRL_CLK_STP_NOW BIT(1) +#define SDW_SCP_CTRL_FORCE_RESET BIT(7) + +#define SDW_SCP_STAT 0x44 +#define SDW_SCP_STAT_CLK_STP_NF BIT(0) +#define SDW_SCP_STAT_HPHY_NOK BIT(5) +#define SDW_SCP_STAT_CURR_BANK BIT(6) + +#define SDW_SCP_SYSTEMCTRL 0x45 +#define SDW_SCP_SYSTEMCTRL_CLK_STP_PREP BIT(0) +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE BIT(2) +#define SDW_SCP_SYSTEMCTRL_WAKE_UP_EN BIT(3) +#define SDW_SCP_SYSTEMCTRL_HIGH_PHY BIT(4) + +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE0 0 +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE1 BIT(2) + +#define SDW_SCP_DEVNUMBER 0x46 +#define SDW_SCP_HIGH_PHY_CHECK 0x47 +#define SDW_SCP_ADDRPAGE1 0x48 +#define SDW_SCP_ADDRPAGE2 0x49 +#define SDW_SCP_KEEPEREN 0x4A +#define SDW_SCP_BANKDELAY 0x4B +#define SDW_SCP_TESTMODE 0x4F +#define SDW_SCP_DEVID_0 0x50 +#define SDW_SCP_DEVID_1 0x51 +#define SDW_SCP_DEVID_2 0x52 +#define SDW_SCP_DEVID_3 0x53 +#define SDW_SCP_DEVID_4 0x54 +#define SDW_SCP_DEVID_5 0x55 + +/* Banked Registers */ +#define SDW_SCP_FRAMECTRL_B0 0x60 +#define SDW_SCP_FRAMECTRL_B1 (0x60 + SDW_BANK1_OFFSET) +#define SDW_SCP_NEXTFRAME_B0 0x61 +#define SDW_SCP_NEXTFRAME_B1 (0x61 + SDW_BANK1_OFFSET) + +/* Both INT and STATUS register is same */ +#define SDW_DPN_INT(n) (0x0 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_INTMASK(n) (0x1 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PORTCTRL(n) (0x2 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL1(n) (0x3 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PREPARESTATUS(n) (0x4 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PREPARECTRL(n) (0x5 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_INT_TEST_FAIL BIT(0) +#define SDW_DPN_INT_PORT_READY BIT(1) +#define SDW_DPN_INT_IMPDEF1 BIT(5) +#define SDW_DPN_INT_IMPDEF2 BIT(6) +#define SDW_DPN_INT_IMPDEF3 BIT(7) + +#define SDW_DPN_PORTCTRL_FLOWMODE GENMASK(1, 0) +#define SDW_DPN_PORTCTRL_DATAMODE GENMASK(3, 2) +#define SDW_DPN_PORTCTRL_NXTINVBANK BIT(4) + +#define SDW_DPN_BLOCKCTRL1_WDLEN GENMASK(5, 0) + +#define SDW_DPN_PREPARECTRL_CH_PREP GENMASK(7, 0) + +#define SDW_DPN_CHANNELEN_B0(n) (0x20 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_CHANNELEN_B1(n) (0x30 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_BLOCKCTRL2_B0(n) (0x21 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL2_B1(n) (0x31 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL1_B0(n) (0x22 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_SAMPLECTRL1_B1(n) (0x32 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL2_B0(n) (0x23 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_SAMPLECTRL2_B1(n) (0x33 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_OFFSETCTRL1_B0(n) (0x24 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_OFFSETCTRL1_B1(n) (0x34 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_OFFSETCTRL2_B0(n) (0x25 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_OFFSETCTRL2_B1(n) (0x35 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_HCTRL_B0(n) (0x26 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_HCTRL_B1(n) (0x36 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_BLOCKCTRL3_B0(n) (0x27 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL3_B1(n) (0x37 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_LANECTRL_B0(n) (0x28 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_LANECTRL_B1(n) (0x38 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL_LOW GENMASK(7, 0) +#define SDW_DPN_SAMPLECTRL_HIGH GENMASK(15, 8) + +#define SDW_DPN_HCTRL_HSTART GENMASK(7, 4) +#define SDW_DPN_HCTRL_HSTOP GENMASK(3, 0) + +#define SDW_NUM_CASC_PORT_INTSTAT1 4 +#define SDW_CASC_PORT_START_INTSTAT1 0 +#define SDW_CASC_PORT_MASK_INTSTAT1 0x8 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT1 0x0 + +#define SDW_NUM_CASC_PORT_INTSTAT2 7 +#define SDW_CASC_PORT_START_INTSTAT2 4 +#define SDW_CASC_PORT_MASK_INTSTAT2 1 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT2 1 + +#define SDW_NUM_CASC_PORT_INTSTAT3 4 +#define SDW_CASC_PORT_START_INTSTAT3 11 +#define SDW_CASC_PORT_MASK_INTSTAT3 1 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT3 2 + +#endif /* __SDW_REGISTERS_H */ -- 2.7.4