Date: Thu, 7 Dec 2017 16:46:10 +0100
From: Andrew Lunn <andrew@lunn.ch>
To: Jerome Brunet <jbrunet@baylibre.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
        Kevin Hilman <khilman@baylibre.com>, netdev@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v2 3/8] net: phy: meson-gxl: add read and write
 helpers for bank registers
Message-ID: <20171207154610.GG24750@lunn.ch>
References: <20171207142715.32578-1-jbrunet@baylibre.com>
 <20171207142715.32578-4-jbrunet@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20171207142715.32578-4-jbrunet@baylibre.com>
User-Agent: Mutt/1.5.23 (2014-03-12)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1262
Lines: 36

On Thu, Dec 07, 2017 at 03:27:10PM +0100, Jerome Brunet wrote:
> Add read and write helpers to manipulate banked registers on this PHY
> This helps clarify the settings applied to these registers in the init
> function and upcoming changes.
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  drivers/net/phy/meson-gxl.c | 103 ++++++++++++++++++++++++++++----------------
>  1 file changed, 67 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index d82aa8cea401..05054770aefb 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -45,11 +45,13 @@
>  #define FR_PLL_DIV0	0x1c
>  #define FR_PLL_DIV1	0x1d
>  
> -static int meson_gxl_config_init(struct phy_device *phydev)
> +static int meson_gxl_open_banks(struct phy_device *phydev)

Hi Jerome

Does the word bank come from the datasheet? Most of the phy drives use
page instead.

Also, we have discovered a race condition which affects drivers using
pages, which can lead to corruption of registers. At some point, i
expect we will be adding helpers to access paged registers, which do
the right thing with respect to locks.

So it would be nice if you used the work page, not bank.

   Thanks

      Andrew