Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752612AbdLGT0y (ORCPT ); Thu, 7 Dec 2017 14:26:54 -0500 Received: from mail.arcx.com ([184.94.50.18]:55211 "EHLO WEBMAIL.arcx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750931AbdLGT00 (ORCPT ); Thu, 7 Dec 2017 14:26:26 -0500 From: Sven Van Asbroeck To: , , , , , , , , , CC: , , Subject: [PATCH v6 1/2] at24: support eeproms that do not auto-rollover reads. Date: Thu, 7 Dec 2017 14:26:18 -0500 Message-ID: <1512674779-10349-2-git-send-email-svendev@arcx.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1512674779-10349-1-git-send-email-svendev@arcx.com> References: <1512674779-10349-1-git-send-email-svendev@arcx.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [192.168.2.155] X-ClientProxiedBy: webmail.arcx.com (192.168.2.64) To WEBMAIL.arcx.com (192.168.2.64) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4107 Lines: 110 Some multi-address eeproms in the at24 family may not automatically roll-over reads to the next slave address. On those eeproms, reads that straddle slave boundaries will not work correctly. Solution: Mark such eeproms with a flag that prevents reads straddling slave boundaries. Add the AT24_FLAG_NO_RDROL flag to the eeprom entry in the device_id table, or add 'no-read-rollover' to the eeprom devicetree entry. Note that I have not personally enountered an at24 chip that does not support read rollovers. They may or may not exist. However, my hardware requires this functionality because of a quirk. It's up to the Linux community to decide if this patch is useful/ general enough to warrant merging. Signed-off-by: Sven Van Asbroeck --- drivers/misc/eeprom/at24.c | 39 ++++++++++++++++++++++++++------------ include/linux/platform_data/at24.h | 2 ++ 2 files changed, 29 insertions(+), 12 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 625b001..06ffa11 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -251,15 +251,6 @@ struct at24_data { * Slave address and byte offset derive from the offset. Always * set the byte address; on a multi-master board, another master * may have changed the chip's "current" address pointer. - * - * REVISIT some multi-address chips don't rollover page reads to - * the next slave address, so we may need to truncate the count. - * Those chips might need another quirk flag. - * - * If the real hardware used four adjacent 24c02 chips and that - * were misconfigured as one 24c08, that would be a similar effect: - * one "eeprom" file not four, but larger reads would fail when - * they crossed certain pages. */ static struct at24_client *at24_translate_offset(struct at24_data *at24, unsigned int *offset) @@ -277,6 +268,30 @@ static struct at24_client *at24_translate_offset(struct at24_data *at24, return &at24->client[i]; } +static size_t at24_adjust_read_count(struct at24_data *at24, + unsigned int offset, size_t count) +{ + unsigned int bits; + size_t remainder; + + /* + * In case of multi-address chips that don't rollover reads to + * the next slave address: truncate the count to the slave boundary, + * so that the read never straddles slaves. + */ + if (at24->chip.flags & AT24_FLAG_NO_RDROL) { + bits = (at24->chip.flags & AT24_FLAG_ADDR16) ? 16 : 8; + remainder = BIT(bits) - offset; + if (count > remainder) + count = remainder; + } + + if (count > io_limit) + count = io_limit; + + return count; +} + static ssize_t at24_regmap_read(struct at24_data *at24, char *buf, unsigned int offset, size_t count) { @@ -289,9 +304,7 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf, at24_client = at24_translate_offset(at24, &offset); regmap = at24_client->regmap; client = at24_client->client; - - if (count > io_limit) - count = io_limit; + count = at24_adjust_read_count(at24, offset, count); /* adjust offset for mac and serial read ops */ offset += at24->offset_adj; @@ -457,6 +470,8 @@ static void at24_get_pdata(struct device *dev, struct at24_platform_data *chip) if (device_property_present(dev, "read-only")) chip->flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + chip->flags |= AT24_FLAG_NO_RDROL; err = device_property_read_u32(dev, "size", &val); if (!err) diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h index 271a4e2..841bb28 100644 --- a/include/linux/platform_data/at24.h +++ b/include/linux/platform_data/at24.h @@ -50,6 +50,8 @@ struct at24_platform_data { #define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ #define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ #define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ +#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ + /* the next slave address */ void (*setup)(struct nvmem_device *nvmem, void *context); void *context; -- 1.9.1