Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753967AbdLHOMP (ORCPT ); Fri, 8 Dec 2017 09:12:15 -0500 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:35875 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753419AbdLHOMJ (ORCPT ); Fri, 8 Dec 2017 09:12:09 -0500 From: Ludovic Barre To: Russell King , Rob Herring , Linus Walleij , Arnd Bergmann CC: Maxime Coquelin , Alexandre Torgue , , , , Ludovic Barre Subject: [PATCH 6/6] ARM: dts: stm32: add initial support of stm32mp157c eval board Date: Fri, 8 Dec 2017 15:11:17 +0100 Message-ID: <1512742277-28205-7-git-send-email-ludovic.Barre@st.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com> References: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.48.0.237] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-12-08_08:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4058 Lines: 134 From: Ludovic Barre Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1) split in 2 elements: -Daughter board (part number: STM32MP157C-ED1) which includes CPU, memory and power supply -Mother board (part number: STM32MP157C-EM1) which includes external peripherals (like display, camera,...) and extension connectors. The daughter board can run alone, this is why the device tree files are split in two layers, for the complete evaluation board (ev1) and for the daughter board alone (ed1). Signed-off-by: Ludovic Barre Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/Makefile | 5 ++++- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 13 +++++++++++++ arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +++++++++++++++++++ 4 files changed, 65 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0381e9..ddfa3b3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -839,7 +839,7 @@ dtb-$(CONFIG_ARCH_STI) += \ stih410-b2120.dtb \ stih410-b2260.dtb \ stih418-b2199.dtb -dtb-$(CONFIG_ARCH_STM32)+= \ +dtb-$(CONFIG_ARCH_STM32_MCU) += \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ stm32f746-disco.dtb \ @@ -848,6 +848,9 @@ dtb-$(CONFIG_ARCH_STM32)+= \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb +dtb-$(CONFIG_ARCH_STM32_MPU) += \ + stm32mp157c-ed1.dtb \ + stm32mp157c-ev1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 440276a..7ac65f4 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -145,6 +145,19 @@ ngpios = <8>; gpio-ranges = <&pinctrl 0 160 8>; }; + + uart4_pins_a: uart4@0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; }; pinctrl_z: pin-controller-z { diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts new file mode 100644 index 0000000..f6a2618 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre for STMicroelectronics. + */ +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP157C eval daughter"; + compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + + chosen { + bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram"; + stdout-path = "serial3:115200n8"; + }; + + memory { + reg = <0xC0000000 0x4000000>; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts new file mode 100644 index 0000000..a310703 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre for STMicroelectronics. + */ +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; + + chosen { + bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram"; + stdout-path = "serial3:115200n8"; + }; +}; + -- 2.7.4