Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754399AbdLHPr4 (ORCPT ); Fri, 8 Dec 2017 10:47:56 -0500 Received: from mail.free-electrons.com ([62.4.15.54]:46835 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754351AbdLHPrr (ORCPT ); Fri, 8 Dec 2017 10:47:47 -0500 From: Alexandre Belloni To: Ralf Baechle Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Alexandre Belloni Subject: [PATCH v2 11/13] MIPS: mscc: add ocelot PCB123 device tree Date: Fri, 8 Dec 2017 16:46:16 +0100 Message-Id: <20171208154618.20105-12-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20171208154618.20105-1-alexandre.belloni@free-electrons.com> References: <20171208154618.20105-1-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1380 Lines: 54 Add a device tree for the Microsemi Ocelot PCB123 evaluation board. Signed-off-by: Alexandre Belloni --- arch/mips/boot/dts/mscc/Makefile | 2 ++ arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 +++++++++++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile index f0a155a74e02..09a1c4b97de2 100644 --- a/arch/mips/boot/dts/mscc/Makefile +++ b/arch/mips/boot/dts/mscc/Makefile @@ -1,3 +1,5 @@ +dtb-$(CONFIG_MSCC_OCELOT) += ocelot_pcb123.dtb + obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) # Force kbuild to make empty built-in.o if necessary diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts new file mode 100644 index 000000000000..42bd404471f6 --- /dev/null +++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* Copyright (c) 2017 Microsemi Corporation */ + +/dts-v1/; + +#include "ocelot.dtsi" + +/ { + compatible = "mscc,ocelot-pcb123", "mscc,ocelot"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0e000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; -- 2.15.1