Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753640AbdLHVzK (ORCPT ); Fri, 8 Dec 2017 16:55:10 -0500 Received: from mail.free-electrons.com ([62.4.15.54]:51836 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753504AbdLHVzD (ORCPT ); Fri, 8 Dec 2017 16:55:03 -0500 From: =?UTF-8?q?Myl=C3=A8ne=20Josserand?= To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, maxime.ripard@free-electrons.com, wens@csie.org, dmitry.torokhov@gmail.com, linux-input@vger.kernel.org Cc: simon.budig@kernelconcepts.de, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, mylene.josserand@free-electrons.com, thomas.petazzoni@free-electrons.com Subject: [PATCH 5/5] arm: dts: sun8i: a83t: a711: Add touchscreen node Date: Fri, 8 Dec 2017 22:54:19 +0100 Message-Id: <20171208215419.30396-6-mylene.josserand@free-electrons.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171208215419.30396-1-mylene.josserand@free-electrons.com> References: <20171208215419.30396-1-mylene.josserand@free-electrons.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1056 Lines: 35 Tha A711 tablet has a FocalTech EDT-FT5x06 Polytouch touchscreen. It is connected via I2C0 so add his node in i2c0's node. The reset line is PD5, the interrupt line is PL7 and the power supply is the ldo_io0 regulator. Signed-off-by: Mylène Josserand --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 84cca1a48cea..738359917a34 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -110,6 +110,17 @@ pinctrl-0 = <&i2c0_pins>; clock-frequency = <400000>; status = "okay"; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; + power-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; }; &mmc0 { -- 2.11.0