Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752258AbdLKRmH (ORCPT ); Mon, 11 Dec 2017 12:42:07 -0500 Received: from us01smtprelay-2.synopsys.com ([198.182.47.9]:60129 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750707AbdLKRmD (ORCPT ); Mon, 11 Dec 2017 12:42:03 -0500 From: Jose Abreu To: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Jose Abreu , Joao Pinto , Rob Herring , Mark Rutland , Mauro Carvalho Chehab , Hans Verkuil , Sylwester Nawrocki , devicetree@vger.kernel.org Subject: [PATCH v10 1/4] dt-bindings: media: Document Synopsys DesignWare HDMI RX Date: Mon, 11 Dec 2017 17:41:18 +0000 Message-Id: X-Mailer: git-send-email 1.9.1 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2984 Lines: 98 Document the bindings for the Synopsys DesignWare HDMI RX. Signed-off-by: Jose Abreu Acked-by: Rob Herring (v8) Cc: Joao Pinto Cc: Rob Herring Cc: Mark Rutland Cc: Mauro Carvalho Chehab Cc: Hans Verkuil Cc: Sylwester Nawrocki Cc: devicetree@vger.kernel.org --- Changes from v7: - Remove SoC specific bindings (Rob) Changes from v6: - Document which properties are required/optional (Sylwester) - Drop compatible string for SoC (Sylwester) - Reword edid-phandle property (Sylwester) - Typo fixes (Sylwester) Changes from v4: - Use "cfg" instead of "cfg-clk" (Rob) - Change node names (Rob) Changes from v3: - Document the new DT bindings suggested by Sylwester Changes from v2: - Document edid-phandle property --- .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt new file mode 100644 index 0000000..1dc09c6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt @@ -0,0 +1,58 @@ +Synopsys DesignWare HDMI RX Decoder +=================================== + +This document defines device tree properties for the Synopsys DesignWare HDMI +RX Decoder (DWC HDMI RX). + +The properties bellow belong to the Synopsys DesignWare HDMI RX Decoder node. + +Required properties: + +- compatible: Shall be "snps,dw-hdmi-rx". +- reg: Memory mapped base address and length of the DWC HDMI RX registers. +- interrupts: Reference to the DWC HDMI RX interrupt and the HDMI 5V sense +interrupt. +- clocks: Reference to the config clock. +- clock-names: Shall be "cfg". +- #address-cells: Shall be 1. +- #size-cells: Shall be 0. + +Optional properties: + +- edid-phandle: Reference to the EDID handler block; if this property is not +specified it is assumed that EDID is handled by device described by parent +node of the HDMI RX node. You should not specify this property if your HDMI RX +controller does not have CEC. + +You also have to create a subnode for the PHY device. PHY node properties are +as follows. + +Required properties: + +- compatible: Shall be "snps,dw-hdmi-phy-e405". +- reg: Shall be the JTAG address of the PHY. +- clocks: Reference to the config clock. +- clock-names: Shall be "cfg". + +Example: + +hdmi_rx: hdmi-rx@0 { + compatible = "snps,dw-hdmi-rx"; + reg = <0x0 0x10000>; + interrupts = <1 2>; + edid-phandle = <&dw_hdmi_edid>; + + clocks = <&dw_hdmi_refclk>; + clock-names = "cfg"; + + #address-cells = <1>; + #size-cells = <0>; + + hdmi-phy@fc { + compatible = "snps,dw-hdmi-phy-e405"; + reg = <0xfc>; + + clocks = <&dw_hdmi_refclk>; + clock-names = "cfg"; + }; +}; -- 1.9.1