Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752671AbdLKXqX (ORCPT ); Mon, 11 Dec 2017 18:46:23 -0500 Received: from mx1.redhat.com ([209.132.183.28]:50684 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751379AbdLKXqU (ORCPT ); Mon, 11 Dec 2017 18:46:20 -0500 From: Lyude Paul To: intel-wired-lan@lists.osuosl.org Cc: Todd Fujinaka , stable@vger.kernel.org, Jeff Kirsher , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] igb: Free IRQs when device is hotplugged Date: Mon, 11 Dec 2017 18:45:02 -0500 Message-Id: <20171211234502.27445-1-lyude@redhat.com> X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.5.110.28]); Mon, 11 Dec 2017 23:46:19 +0000 (UTC) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4733 Lines: 87 Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon hotplugging my kernel would immediately crash due to igb: [ 680.825801] kernel BUG at drivers/pci/msi.c:352! [ 680.828388] invalid opcode: 0000 [#1] SMP [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb] [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6 [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017 [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0 [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286 [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178 [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00 [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298 [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000 [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000 [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0 [ 680.837954] Call Trace: [ 680.838853] pci_disable_msix+0xce/0xf0 [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb] [ 680.840278] igb_remove+0x9d/0x110 [igb] [ 680.840764] pci_device_remove+0x36/0xb0 [ 680.841279] device_release_driver_internal+0x157/0x220 [ 680.841739] pci_stop_bus_device+0x7d/0xa0 [ 680.842255] pci_stop_bus_device+0x2b/0xa0 [ 680.842722] pci_stop_bus_device+0x3d/0xa0 [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20 [ 680.843627] trim_stale_devices+0xf3/0x140 [ 680.844086] trim_stale_devices+0x94/0x140 [ 680.844532] trim_stale_devices+0xa6/0x140 [ 680.845031] ? get_slot_status+0x90/0xc0 [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140 [ 680.846021] acpiphp_hotplug_notify+0x175/0x200 [ 680.846581] ? free_bridge+0x100/0x100 [ 680.847113] acpi_device_hotplug+0x8a/0x490 [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30 [ 680.848076] process_one_work+0x182/0x3a0 [ 680.848543] worker_thread+0x2e/0x380 [ 680.848963] ? process_one_work+0x3a0/0x3a0 [ 680.849373] kthread+0x111/0x130 [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50 [ 680.850188] ret_from_fork+0x1f/0x30 [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0 As it turns out, normally the freeing of IRQs that would fix this is called inside of the scope of __igb_close(). However, since the device is already gone by the point we try to unregister the netdevice from the driver due to a hotplug we end up seeing that the netif isn't present and thus, forget to free any of the device IRQs. So: after unregistering the netdev in igb_remove() check whether the PCI device is stale and if so, free it's IRQs and tx/rx resources. Signed-off-by: Lyude Paul Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach") Cc: Todd Fujinaka Cc: stable@vger.kernel.org --- drivers/net/ethernet/intel/igb/igb_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index c208753ff5b7..e650348b4bd7 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3325,6 +3325,16 @@ static void igb_remove(struct pci_dev *pdev) unregister_netdev(netdev); + /* If the PCI device has already been physically removed (e.g. user + * unplugged a thunderbolt dock containing our hw) then the netif will + * already be down, so unregistering the netdev won't free the IRQs + */ + if (!pci_device_is_present(pdev)) { + igb_free_irq(adapter); + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + } + igb_clear_interrupt_scheme(adapter); pci_iounmap(pdev, adapter->io_addr); -- 2.14.3