Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 7 Mar 2001 00:43:05 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 7 Mar 2001 00:42:46 -0500 Received: from smtp4vepub.gte.net ([206.46.170.25]:3165 "EHLO smtp4ve.mailsrvcs.net") by vger.kernel.org with ESMTP id ; Wed, 7 Mar 2001 00:42:33 -0500 Message-ID: <3AA5CA13.8C19FC7E@neuronet.pitt.edu> Date: Wed, 07 Mar 2001 00:41:39 -0500 From: "Rafael E. Herrera" X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Justin T. Gibbs" CC: LK Subject: Re: Kernel 2.4.3 and new aic7xxx In-Reply-To: <200103061847.f26IlaO06717@aslan.scsiguy.com> Content-Type: multipart/mixed; boundary="------------E718780FC18901B81C168E9D" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------E718780FC18901B81C168E9D Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit "Justin T. Gibbs" wrote: > Can you provide me with a dmesg from a boot with aic7xxx=verbose? > I just tested this on a 3940AUW and the behavior was as expected. > Perhaps you have a motherboard based controller that has no seeprom? > I don't know how to detect flipped channels in that configuration > but I'll see what I can find out. I've a Super P6SBS motherboard with a builtin dual channel Adaptec 7890 Ultra II scsi controller. I'm attaching the console grab when booting 2.4.3-pre2. The controller BIOS is configured to boot off the disk with scsi id 0 on channel B. -- Rafael --------------E718780FC18901B81C168E9D Content-Type: text/plain; charset=us-ascii; name="log" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="log" Linux version 2.4.3-pre2 (raffo@inca) (gcc version 2.95.2 19991024 (release)) #1 Mon Mar 5 12:54:06 EST 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000020000 @ 00000000000e0000 (reserved) BIOS-e820: 000000000ff00000 @ 0000000000100000 (usable) BIOS-e820: 0000000000040000 @ 00000000fffc0000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=linux_243 ro root=803 BOOT_FILE=/boot/vmlinuz_243 1 aic7xxx=verbose console=t8 Initializing CPU#0 Detected 701.600 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1399.19 BogoMIPS Memory: 255488k/262144k available (1064k kernel code, 6268k reserved, 416k data, 188k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Limiting direct PCI/PCI transfers. isapnp: Scanning for Pnp cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169725kB/56575kB, 512 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: WDC AC310100B, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 19807200 sectors (10141 MB) w/512KiB Cache, CHS=1232/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted ahc_pci:0:14:1: Reading SEEPROM...done. ahc_pci:0:14:1: Low byte termination Enabled ahc_pci:0:14:1: High byte termination Enabled ahc_pci:0:14:1: Downloading Sequencer Program... 404 instructions downloaded ahc_pci:0:14:0: Reading SEEPROM...done. ahc_pci:0:14:0: Low byte termination Enabled ahc_pci:0:14:0: High byte termination Enabled ahc_pci:0:14:0: Downloading Sequencer Program... 404 instructions downloaded scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5 aic7895C: Wide Channel A, SCSI Id=7, 32/255 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5 aic7895C: Wide Channel B, SCSI Id=7, 32/255 SCBs Vendor: SEAGATE Model: ST15150N Rev: 4611 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 2, lun 0 (scsi0:A:2:1): Sending SDTR period c, offset f (scsi0:A:2:1): Received SDTR period 19, offset f Filtered to period 19, offset f (scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15) scsi0: target 2 synchronous at 10.0MHz, offset = 0xf Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:4:1): Sending SDTR period c, offset f (scsi0:A:4:1): Received SDTR period 19, offset f Filtered to period 19, offset f (scsi0:A:4): 10.000MB/s transfers (10.000MHz, offset 15) scsi0: target 4 synchronous at 10.0MHz, offset = 0xf Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:4:2): Sending SDTR period c, offset f (scsi0:A:4:2): Received SDTR period 19, offset f Filtered to period 19, offset f Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:4:3): Sending SDTR period c, offset f (scsi0:A:4:3): Received SDTR period 19, offset f Filtered to period 19, offset f Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:4:4): Sending SDTR period c, offset f (scsi0:A:4:4): Received SDTR period 19, offset f Filtered to period 19, offset f Vendor: NAKAMICH Model: MJ-5.16S Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:4:5): Sending SDTR period c, offset f (scsi0:A:4:5): Received SDTR period 19, offset f Filtered to period 19, offset f Vendor: TEAC Model: CD-R56S4 Rev: 1.0P Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:5:1): Sending SDTR period c, offset f (scsi0:A:5:1): Received SDTR period 19, offset f Filtered to period 19, offset f (scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15) scsi0: target 5 synchronous at 10.0MHz, offset = 0xf (scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15) scsi0:0:2:0: Tagged Queuing enabled. Depth 16 Vendor: SEAGATE Model: ST39173LW Rev: 6246 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi1, channel 0, id 0, lun 0 (scsi1:A:0:1): Sending WDTR 1 (scsi1:A:0:1): Received WDTR 1 filtered to 1 (scsi1:A:0): 6.600MB/s transfers (16bit) scsi1: target 0 using 16bit transfers (scsi1:A:0:1): Sending SDTR period 2b, offset 8 (scsi1:A:0:1): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 (scsi1:A:0): 11.626MB/s transfers (5.813MHz, offset 8, 16bit) scsi1: target 0 synchronous at 5.7MHz, offset = 0x8 Vendor: COMPAQ Model: WDE4360W Rev: 1.52 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdc at scsi1, channel 0, id 8, lun 0 (scsi1:A:8:1): Sending WDTR 1 (scsi1:A:8:1): Received WDTR 1 filtered to 1 (scsi1:A:8): 6.600MB/s transfers (16bit) scsi1: target 8 using 16bit transfers (scsi1:A:8:1): Sending SDTR period 2b, offset 8 (scsi1:A:8:1): Received SDTR period 2d, offset 8 Filtered to period 2d, offset 8 (scsi1:A:8): 11.110MB/s transfers (5.555MHz, offset 8, 16bit) scsi1: target 8 synchronous at 5.0MHz, offset = 0x8 (scsi1:A:0): 11.626MB/s transfers (5.813MHz, offset 8, 16bit) scsi1:0:0:0: Tagged Queuing enabled. Depth 16 (scsi1:A:8): 11.110MB/s transfers (5.555MHz, offset 8, 16bit) scsi1:0:8:0: Tagged Queuing enabled. Depth 16 (scsi0:A:2:0): Sending SDTR period c, offset f (scsi0:A:2:0): Received SDTR period 19, offset f Filtered to period 19, offset f (scsi0:A:2:0): Sending SDTR period 19, offset f (scsi0:A:2:0): Received SDTR period 19, offset f Filtered to period 19, offset f SCSI device sda: 8388315 512-byte hdwr sectors (4295 MB) /dev/scsi/host0/bus0/target2/lun0: p1 (scsi1:A:0:0): Sending WDTR 1 (scsi1:A:0:0): Received WDTR 1 filtered to 1 (scsi1:A:0): 6.600MB/s transfers (16bit) scsi1: target 0 using asynchronous transfers (scsi1:A:0:0): Sending SDTR period 2b, offset 8 (scsi1:A:0:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 (scsi1:A:0): 11.626MB/s transfers (5.813MHz, offset 8, 16bit) scsi1: target 0 synchronous at 5.7MHz, offset = 0x8 SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4 (scsi1:A:8:0): Sending WDTR 1 (scsi1:A:8:0): Received WDTR 1 filtered to 1 (scsi1:A:8): 6.600MB/s transfers (16bit) scsi1: target 8 using asynchronous transfers (scsi1:A:8:0): Sending SDTR period 2d, offset 8 (scsi1:A:8:0): Received SDTR period 2d, offset 8 Filtered to period 2d, offset 8 (scsi1:A:8): 11.110MB/s transfers (5.555MHz, offset 8, 16bit) scsi1: target 8 synchronous at 5.0MHz, offset = 0x8 SCSI device sdc: 8386000 512-byte hdwr sectors (4294 MB) /dev/scsi/host1/bus0/target8/lun0: p1 p2 LVM version 0.9.1_beta2 by Heinz Mauelshagen (18/01/2001) lvm -- Driver successfully initialized NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 VFS: Cannot open root device "803" or 08:03 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 08:03 --------------E718780FC18901B81C168E9D-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/