Date: Tue, 15 Jul 2003 21:51:42 +0200
From: "Jean-Luc Coulon (f5ibh)" <jean-luc.coulon@wanadoo.fr>
To: "Jean-Luc Coulon (f5ibh)" <jean-luc.coulon@wanadoo.fr>
Cc: linux-kernel@vger.kernel.org
Subject: =?iso-8859-1?B?UmWg?=
	=?iso-8859-1?Q?=3A?= Matrox Millenium and framebuffer
Message-ID: <20030715195142.GA3100@tangerine>
References: <20030715193545.GA1024@tangerine>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
Content-Disposition: inline
Content-Transfer-Encoding: 7BIT
In-Reply-To: <20030715193545.GA1024@tangerine>; from jean-luc.coulon@wanadoo.fr on mar, jui 15, 2003 at 21:35:45 +0200
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3367
Lines: 104

My fault : I was testing 2 matrox cards and the one in the box was a 
mystique...

---
Cheers
	Jean-Luc

On 15.07.2003 21:35, Jean-Luc Coulon (f5ibh) wrote:
> Hi,
> 
> I've a Matrox Millenium card and I want to run the framebuffer.
> I've set the following configuration :
> 
> # Frame-buffer support
> #
> CONFIG_FB=y
> CONFIG_DUMMY_CONSOLE=y
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_CLGEN is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_VESA is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_HGA is not set
> CONFIG_VIDEO_SELECT=y
> CONFIG_FB_MATROX=y
> CONFIG_FB_MATROX_MILLENIUM=y
> # CONFIG_FB_MATROX_MYSTIQUE is not set
> # CONFIG_FB_MATROX_G450 is not set
> # CONFIG_FB_MATROX_G100A is not set
> CONFIG_FB_MATROX_PROC=m
> # CONFIG_FB_MATROX_MULTIHEAD is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_INTEL is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_FBCON_ADVANCED=y
> CONFIG_FBCON_MFB=y
> # CONFIG_FBCON_CFB2 is not set
> # CONFIG_FBCON_CFB4 is not set
> CONFIG_FBCON_CFB8=y
> CONFIG_FBCON_CFB16=y
> CONFIG_FBCON_CFB24=y
> CONFIG_FBCON_CFB32=y
> # CONFIG_FBCON_AFB is not set
> # CONFIG_FBCON_ILBM is not set
> # CONFIG_FBCON_IPLAN2P2 is not set
> # CONFIG_FBCON_IPLAN2P4 is not set
> # CONFIG_FBCON_IPLAN2P8 is not set
> # CONFIG_FBCON_MAC is not set
> 
> 
> And I pass the parameter video=matrox to the kernel.
> I tried video=matrox:vesa=<something> without any success.
> 
> Here are the boot lines from dmesg :
> 
> [root@tangerine] /usr/src/linux/drivers/video/matrox # dmesg | more
> Linux version 2.4.21 (root@tangerine) (version gcc 3.3.1 20030626 
> (Debian prerel
> ease)) #1 mar jui 15 18:40:01 CEST 2003 matroxfb_Ti3026.c
> BIOS-provided physical RAM map:50.h     matroxfb_Ti3026.h
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)s 
> matroxfb_base.c  BIOS-e820: 0000000000100000 - 0000000017ffc000 
> (usable)ess /boot/
> config
>  BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
>  BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)s /boot/
> config-2.4.21  BIOS-e820: 00000000ffff0000 - 0000000100000000 
> (reserved)
> 383MB LOWMEM available.
> On node 0 totalpages: 98300
> zone(0): 4096 pages.
> zone(1): 94204 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/hda2 reboot=warm hdc=ide-scsi hdd=ide-
> scsi pci=bi
> osirq video=matrox
> ide_setup: hdc=ide-scsi
> ide_setup: hdd=ide-scsi
> Initializing CPU#0
> Detected 501.160 MHz processor.
> Console: colour VGA+ 80x25
> 
> If I compile a vesa framebuffer, it works but not accelerated.
> 
> ---
> Regards
> 	Jean-Luc
> 
> ----------------------------------------------------------------------------
> Jean-Luc Coulon
> 28 rue d'Evette
> 90350 Evette-Salbert
> FRANCE
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/